* [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename
@ 2015-08-12 15:48 Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 1/5] block: Change bdrv_get_encrypted_filename() Max Reitz
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
This series depends on
"[PATCH] block/raw-posix: Use raw_normalize_devicepath()".
The BDS filename field is generally only used when opening disk images
or emitting error or warning messages, the only exception to this rule
is the map command of qemu-img. However, using exact_filename there
instead should not be a problem. Therefore, we can drop the filename
field from the BlockDriverState and use a function instead which builds
the filename from scratch when called.
This is slower than reading a static char array but the problem of that
static array is that it may become obsolete due to changes in any
BlockDriverState or in the BDS graph. Using a function which rebuilds
the filename every time it is called resolves this problem.
The disadvantage of worse performance is negligible, on the other hand.
After patch 2 of this series, which replaces some queries of
BDS.filename by reads from somewhere else (mostly BDS.exact_filename),
the filename field is only used when a disk image is opened or some
message should be emitted, both of which cases do not suffer from the
performance hit.
http://lists.nongnu.org/archive/html/qemu-devel/2015-06/msg07025.html
gives an example of how to achieve an outdated filename, so we do need
this series. We can technically fix it differently (by appropriately
invoking bdrv_refresh_filename()), but that is pretty difficult™. I find
this series simpler and it it's something we wanted to do anyway.
Regarding the fear that this might change current behavior, especially
for libvirt which used filenames to identify nodes in the BDS graph:
Since bdrv_open() already calls bdrv_refresh_filename() today, and
apparently everything works fine, this series will most likely not break
anything. The only thing that will change is if the BDS graph is
dynamically reconfigured at runtime, and in that case it's most likely a
bug fix. Also, I don't think libvirt supports such cases already.
tl;dr: This series is a bug fix and I don't think it'll break legacy
management applications relying on the filename to identify a BDS; as
long as they are not trying to continue that practice with more advanced
configurations (e.g. with Quorum).
v2:
- Patches 1 and 4: Store filename in heap rather than on the stack
[Wen Congyang]
- Patch 2:
- Rebased on
"[PATCH] block/raw-posix: Use raw_normalize_devicepath()"
- Fixed 85-character line
- Patch 3: Added wrapper function which facilitates generation of a
filename into a temporary heap buffer
git-backport-diff against v2:
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively
001/5:[0011] [FC] 'block: Change bdrv_get_encrypted_filename()'
002/5:[0007] [FC] 'block: Avoid BlockDriverState.filename'
003/5:[0009] [FC] 'block: Add bdrv_filename()'
004/5:[0129] [FC] 'block: Drop BlockDriverState.filename'
005/5:[----] [--] 'iotests: Test changed Quorum filename'
Max Reitz (5):
block: Change bdrv_get_encrypted_filename()
block: Avoid BlockDriverState.filename
block: Add bdrv_filename()
block: Drop BlockDriverState.filename
iotests: Test changed Quorum filename
block.c | 108 +++++++++++++++++++++++++++++++++-------------
block/commit.c | 4 +-
block/gluster.c | 2 +-
block/mirror.c | 16 +++++--
block/qapi.c | 4 +-
block/raw-posix.c | 20 ++++++---
block/raw-win32.c | 4 +-
block/raw_bsd.c | 4 +-
block/vhdx-log.c | 5 ++-
block/vmdk.c | 22 +++++++---
block/vpc.c | 7 ++-
blockdev.c | 22 +++++++---
include/block/block.h | 4 +-
include/block/block_int.h | 1 -
monitor.c | 6 ++-
qemu-img.c | 2 +-
tests/qemu-iotests/041 | 17 ++++++--
17 files changed, 179 insertions(+), 69 deletions(-)
--
2.4.6
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 1/5] block: Change bdrv_get_encrypted_filename()
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
@ 2015-08-12 15:48 ` Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename Max Reitz
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
Instead of returning a pointer to the filename, copy it into a buffer
specified by the caller.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block.c | 25 ++++++++++++++++++-------
include/block/block.h | 2 +-
monitor.c | 6 +++++-
3 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/block.c b/block.c
index d088ee0..41b0f85 100644
--- a/block.c
+++ b/block.c
@@ -2760,10 +2760,13 @@ void bdrv_add_key(BlockDriverState *bs, const char *key, Error **errp)
}
} else {
if (bdrv_key_required(bs)) {
+ char *enc_filename = g_malloc(PATH_MAX);
+ bdrv_get_encrypted_filename(bs, enc_filename, PATH_MAX);
error_set(errp, ERROR_CLASS_DEVICE_ENCRYPTED,
"'%s' (%s) is encrypted",
bdrv_get_device_or_node_name(bs),
- bdrv_get_encrypted_filename(bs));
+ enc_filename);
+ g_free(enc_filename);
}
}
}
@@ -2980,14 +2983,22 @@ bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
return false;
}
-const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
+char *bdrv_get_encrypted_filename(BlockDriverState *bs, char *dest, size_t sz)
{
- if (bs->backing_hd && bs->backing_hd->encrypted)
- return bs->backing_file;
- else if (bs->encrypted)
- return bs->filename;
- else
+ if (sz > INT_MAX) {
+ sz = INT_MAX;
+ }
+
+ if (bs->backing_hd && bs->backing_hd->encrypted) {
+ pstrcpy(dest, sz, bs->backing_file);
+ return dest;
+ } else if (bs->encrypted) {
+ pstrcpy(dest, sz, bs->filename);
+ return dest;
+ } else {
+ dest[0] = '\0';
return NULL;
+ }
}
void bdrv_get_backing_filename(BlockDriverState *bs,
diff --git a/include/block/block.h b/include/block/block.h
index 37916f7..a78e4f1 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -430,7 +430,7 @@ void bdrv_round_to_clusters(BlockDriverState *bs,
int64_t *cluster_sector_num,
int *cluster_nb_sectors);
-const char *bdrv_get_encrypted_filename(BlockDriverState *bs);
+char *bdrv_get_encrypted_filename(BlockDriverState *bs, char *dest, size_t sz);
void bdrv_get_backing_filename(BlockDriverState *bs,
char *filename, int filename_size);
void bdrv_get_full_backing_filename(BlockDriverState *bs,
diff --git a/monitor.c b/monitor.c
index aeea2b5..a7d1650 100644
--- a/monitor.c
+++ b/monitor.c
@@ -5292,10 +5292,14 @@ int monitor_read_bdrv_key_start(Monitor *mon, BlockDriverState *bs,
BlockCompletionFunc *completion_cb,
void *opaque)
{
+ char *enc_filename;
int err;
+ enc_filename = g_malloc(PATH_MAX);
+ bdrv_get_encrypted_filename(bs, enc_filename, PATH_MAX);
monitor_printf(mon, "%s (%s) is encrypted.\n", bdrv_get_device_name(bs),
- bdrv_get_encrypted_filename(bs));
+ enc_filename);
+ g_free(enc_filename);
mon->password_completion_cb = completion_cb;
mon->password_opaque = opaque;
--
2.4.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 1/5] block: Change bdrv_get_encrypted_filename() Max Reitz
@ 2015-08-12 15:48 ` Max Reitz
2015-08-13 14:59 ` Kevin Wolf
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 3/5] block: Add bdrv_filename() Max Reitz
` (3 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
In places which directly pass a filename to the OS, we should not use
the filename field at all but exact_filename instead (although the
former currently equals the latter if that is set).
In qemu-img's map command, we should be using the filename field; but
since this commit prepares to remove that field, using exact_filename is
fine, too (this is the only user of BlockDriverState.filename which
frequently queries that field).
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block.c | 5 +++--
block/gluster.c | 2 +-
block/raw-posix.c | 8 ++++----
block/raw-win32.c | 4 ++--
qemu-img.c | 2 +-
5 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/block.c b/block.c
index 41b0f85..1572785 100644
--- a/block.c
+++ b/block.c
@@ -918,8 +918,9 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
if (ret < 0) {
if (local_err) {
error_propagate(errp, local_err);
- } else if (bs->filename[0]) {
- error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
+ } else if (bs->exact_filename[0]) {
+ error_setg_errno(errp, -ret, "Could not open '%s'",
+ bs->exact_filename);
} else {
error_setg_errno(errp, -ret, "Could not open image");
}
diff --git a/block/gluster.c b/block/gluster.c
index 1eb3a8c..176682b 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -358,7 +358,7 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
gconf = g_new0(GlusterConf, 1);
- reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, errp);
+ reop_s->glfs = qemu_gluster_init(gconf, state->bs->exact_filename, errp);
if (reop_s->glfs == NULL) {
ret = -errno;
goto exit;
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 30df8ad..10f8f62 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -670,7 +670,7 @@ static int raw_reopen_prepare(BDRVReopenState *state,
/* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
if (raw_s->fd == -1) {
- const char *normalized_filename = state->bs->filename;
+ const char *normalized_filename = state->bs->exact_filename;
ret = raw_normalize_devicepath(&normalized_filename);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not normalize device path");
@@ -2201,7 +2201,7 @@ static int fd_open(BlockDriverState *bs)
DPRINTF("No floppy (open delayed)\n");
return -EIO;
}
- s->fd = qemu_open(bs->filename, s->open_flags & ~O_NONBLOCK);
+ s->fd = qemu_open(bs->exact_filename, s->open_flags & ~O_NONBLOCK);
if (s->fd < 0) {
s->fd_error_time = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
s->fd_got_error = 1;
@@ -2498,7 +2498,7 @@ static void floppy_eject(BlockDriverState *bs, bool eject_flag)
qemu_close(s->fd);
s->fd = -1;
}
- fd = qemu_open(bs->filename, s->open_flags | O_NONBLOCK);
+ fd = qemu_open(bs->exact_filename, s->open_flags | O_NONBLOCK);
if (fd >= 0) {
if (ioctl(fd, FDEJECT, 0) < 0)
perror("FDEJECT");
@@ -2722,7 +2722,7 @@ static int cdrom_reopen(BlockDriverState *bs)
*/
if (s->fd >= 0)
qemu_close(s->fd);
- fd = qemu_open(bs->filename, s->open_flags, 0644);
+ fd = qemu_open(bs->exact_filename, s->open_flags, 0644);
if (fd < 0) {
s->fd = -1;
return -EIO;
diff --git a/block/raw-win32.c b/block/raw-win32.c
index 68f2338..5c8a894 100644
--- a/block/raw-win32.c
+++ b/block/raw-win32.c
@@ -417,7 +417,7 @@ static void raw_close(BlockDriverState *bs)
CloseHandle(s->hfile);
if (bs->open_flags & BDRV_O_TEMPORARY) {
- unlink(bs->filename);
+ unlink(bs->exact_filename);
}
}
@@ -485,7 +485,7 @@ static int64_t raw_get_allocated_file_size(BlockDriverState *bs)
DWORD * high);
get_compressed_t get_compressed;
struct _stati64 st;
- const char *filename = bs->filename;
+ const char *filename = bs->exact_filename;
/* WinNT support GetCompressedFileSize to determine allocate size */
get_compressed =
(get_compressed_t) GetProcAddress(GetModuleHandle("kernel32"),
diff --git a/qemu-img.c b/qemu-img.c
index 75f4ee4..3d5587a 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -2155,7 +2155,7 @@ static void dump_map_entry(OutputFormat output_format, MapEntry *e,
}
if ((e->flags & (BDRV_BLOCK_DATA|BDRV_BLOCK_ZERO)) == BDRV_BLOCK_DATA) {
printf("%#-16"PRIx64"%#-16"PRIx64"%#-16"PRIx64"%s\n",
- e->start, e->length, e->offset, e->bs->filename);
+ e->start, e->length, e->offset, e->bs->exact_filename);
}
/* This format ignores the distinction between 0, ZERO and ZERO|DATA.
* Modify the flags here to allow more coalescing.
--
2.4.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 3/5] block: Add bdrv_filename()
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 1/5] block: Change bdrv_get_encrypted_filename() Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename Max Reitz
@ 2015-08-12 15:48 ` Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename Max Reitz
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
Split the part which actually refreshes the BlockDriverState.filename
field off of bdrv_refresh_filename() into a more generic function
bdrv_filename(), which first calls bdrv_refresh_filename() and then
stores a qemu-usable filename into the given buffer instead of
BlockDriverState.filename.
Since bdrv_refresh_filename() therefore no longer refreshes that field,
some calls to that function have to be replaced by calls to
bdrv_filename() "manually" refreshing the BDS filename field (this is
only temporary).
Additionally, a wrapper function bdrv_filename_alloc() is added which
allocates a buffer of size PATH_MAX, call bdrv_filename() on that buffer
and returns it, since needing a temporary buffer for the filename is a
rather common pattern.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block.c | 39 ++++++++++++++++++++++++++++++++-------
block/blkverify.c | 3 ++-
block/quorum.c | 2 +-
include/block/block.h | 2 ++
4 files changed, 37 insertions(+), 9 deletions(-)
diff --git a/block.c b/block.c
index 1572785..d2a3e8d 100644
--- a/block.c
+++ b/block.c
@@ -1559,7 +1559,7 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
}
}
- bdrv_refresh_filename(bs);
+ bdrv_filename(bs, bs->filename, sizeof(bs->filename));
/* For snapshot=on, create a temporary qcow2 overlay. bs points to the
* temporary snapshot afterwards. */
@@ -4153,9 +4153,6 @@ static bool append_open_options(QDict *d, BlockDriverState *bs)
* - full_open_options: Options which, when given when opening a block device
* (without a filename), result in a BDS (mostly)
* equalling the given one
- * - filename: If exact_filename is set, it is copied here. Otherwise,
- * full_open_options is converted to a JSON object, prefixed with
- * "json:" (for use through the JSON pseudo protocol) and put here.
*/
void bdrv_refresh_filename(BlockDriverState *bs)
{
@@ -4242,15 +4239,43 @@ void bdrv_refresh_filename(BlockDriverState *bs)
bs->full_open_options = opts;
}
+}
+
+/* First refreshes exact_filename and full_open_options by calling
+ * bdrv_refresh_filename(). Then, if exact_filename is set, it is copied into
+ * the target buffer. Otherwise, full_open_options is converted to a JSON
+ * object, prefixed with "json:" (for use through the JSON pseudo protocol) and
+ * put there.
+ *
+ * If sz > 0, the string put into the buffer will always be null-terminated.
+ *
+ * Returns @dest.
+ */
+char *bdrv_filename(BlockDriverState *bs, char *dest, size_t sz)
+{
+ bdrv_refresh_filename(bs);
+
+ if (sz > INT_MAX) {
+ sz = INT_MAX;
+ }
if (bs->exact_filename[0]) {
- pstrcpy(bs->filename, sizeof(bs->filename), bs->exact_filename);
+ pstrcpy(dest, sz, bs->exact_filename);
} else if (bs->full_open_options) {
QString *json = qobject_to_json(QOBJECT(bs->full_open_options));
- snprintf(bs->filename, sizeof(bs->filename), "json:%s",
- qstring_get_str(json));
+ snprintf(dest, sz, "json:%s", qstring_get_str(json));
QDECREF(json);
}
+
+ return dest;
+}
+
+/* Wrapper around bdrv_filename() using g_malloc(PATH_MAX) for the destination
+ * buffer.
+ */
+char *bdrv_filename_alloc(BlockDriverState *bs)
+{
+ return bdrv_filename(bs, g_malloc(PATH_MAX), PATH_MAX);
}
/* This accessor function purpose is to allow the device models to access the
diff --git a/block/blkverify.c b/block/blkverify.c
index d277e63..cb9ce02 100644
--- a/block/blkverify.c
+++ b/block/blkverify.c
@@ -309,7 +309,8 @@ static void blkverify_refresh_filename(BlockDriverState *bs)
BDRVBlkverifyState *s = bs->opaque;
/* bs->file has already been refreshed */
- bdrv_refresh_filename(s->test_file);
+ bdrv_filename(s->test_file, s->test_file->filename,
+ sizeof(s->test_file->filename));
if (bs->file->full_open_options && s->test_file->full_open_options) {
QDict *opts = qdict_new();
diff --git a/block/quorum.c b/block/quorum.c
index 2f6c45f..00d1fb0 100644
--- a/block/quorum.c
+++ b/block/quorum.c
@@ -1003,7 +1003,7 @@ static void quorum_refresh_filename(BlockDriverState *bs)
int i;
for (i = 0; i < s->num_children; i++) {
- bdrv_refresh_filename(s->bs[i]);
+ bdrv_filename(s->bs[i], s->bs[i]->filename, sizeof(s->bs[i]->filename));
if (!s->bs[i]->full_open_options) {
return;
}
diff --git a/include/block/block.h b/include/block/block.h
index a78e4f1..4be6c18 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -267,6 +267,8 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
const char *backing_file);
int bdrv_get_backing_file_depth(BlockDriverState *bs);
void bdrv_refresh_filename(BlockDriverState *bs);
+char *bdrv_filename(BlockDriverState *bs, char *dest, size_t sz);
+char *bdrv_filename_alloc(BlockDriverState *bs);
int bdrv_truncate(BlockDriverState *bs, int64_t offset);
int64_t bdrv_nb_sectors(BlockDriverState *bs);
int64_t bdrv_getlength(BlockDriverState *bs);
--
2.4.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
` (2 preceding siblings ...)
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 3/5] block: Add bdrv_filename() Max Reitz
@ 2015-08-12 15:48 ` Max Reitz
2015-08-13 15:28 ` Kevin Wolf
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 5/5] iotests: Test changed Quorum filename Max Reitz
2015-08-13 15:30 ` [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Kevin Wolf
5 siblings, 1 reply; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
That field is now only used during initialization of BlockDriverStates
(opening images) and for error or warning messages. Performance is not
that much of an issue here, so we can drop the field and replace its use
by a call to bdrv_filename() or bdrv_filename_alloc(). By doing so we
can ensure the result always to be recent, whereas the contents of
BlockDriverState.filename may have been obsoleted by manipulations of
single BlockDriverStates or of the BDS graph.
The users of the BDS filename field were changed as follows:
- copying the filename into another buffer is trivially replaced by
using bdrv_filename() instead of the copy function
- strdup() on the filename is replaced by a call to
bdrv_filename_alloc()
- bdrv_filename(bs, bs->filename, sizeof(bs->filename)) is replaced by
bdrv_refresh_filename(bs)
(these were introduced by the previous patch)
- anywhere else bdrv_filename_alloc() is used, any access to
BlockDriverState.filename is then replaced by the buffer returned, and
it is freed when it is no longer needed
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block.c | 47 ++++++++++++++++++++++++++++++-----------------
block/blkverify.c | 3 +--
block/commit.c | 4 +++-
block/mirror.c | 16 ++++++++++++----
block/qapi.c | 4 ++--
block/quorum.c | 2 +-
block/raw-posix.c | 12 +++++++++---
block/raw_bsd.c | 4 +++-
block/vhdx-log.c | 5 ++++-
block/vmdk.c | 22 ++++++++++++++++------
block/vpc.c | 7 +++++--
blockdev.c | 22 +++++++++++++++++-----
include/block/block_int.h | 1 -
13 files changed, 103 insertions(+), 46 deletions(-)
diff --git a/block.c b/block.c
index d2a3e8d..c53d1d6 100644
--- a/block.c
+++ b/block.c
@@ -227,10 +227,10 @@ void bdrv_get_full_backing_filename_from_filename(const char *backed,
void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz,
Error **errp)
{
- char *backed = bs->exact_filename[0] ? bs->exact_filename : bs->filename;
-
+ char *backed = bdrv_filename_alloc(bs);
bdrv_get_full_backing_filename_from_filename(backed, bs->backing_file,
dest, sz, errp);
+ g_free(backed);
}
void bdrv_register(BlockDriver *bdrv)
@@ -821,6 +821,7 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
QDict *options, int flags, BlockDriver *drv, Error **errp)
{
int ret, open_flags;
+ char *filename_buffer = NULL;
const char *filename;
const char *node_name = NULL;
QemuOpts *opts;
@@ -831,7 +832,8 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
assert(options != NULL && bs->options != options);
if (file != NULL) {
- filename = file->filename;
+ filename_buffer = bdrv_filename_alloc(file);
+ filename = filename_buffer;
} else {
filename = qdict_get_try_str(options, "filename");
}
@@ -839,7 +841,8 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
if (drv->bdrv_needs_filename && !filename) {
error_setg(errp, "The '%s' block driver requires a file name",
drv->format_name);
- return -EINVAL;
+ ret = -EINVAL;
+ goto fail_filename;
}
trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
@@ -888,11 +891,10 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
}
if (filename != NULL) {
- pstrcpy(bs->filename, sizeof(bs->filename), filename);
+ pstrcpy(bs->exact_filename, sizeof(bs->exact_filename), filename);
} else {
- bs->filename[0] = '\0';
+ bs->exact_filename[0] = '\0';
}
- pstrcpy(bs->exact_filename, sizeof(bs->exact_filename), bs->filename);
bs->drv = drv;
bs->opaque = g_malloc0(drv->instance_size);
@@ -952,6 +954,7 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
assert((bs->request_alignment != 0) || bdrv_is_sg(bs));
qemu_opts_del(opts);
+ g_free(filename_buffer);
return 0;
free_and_fail:
@@ -961,6 +964,8 @@ free_and_fail:
bs->drv = NULL;
fail_opts:
qemu_opts_del(opts);
+fail_filename:
+ g_free(filename_buffer);
return ret;
}
@@ -1158,7 +1163,7 @@ void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
}
bs->backing_child = bdrv_attach_child(bs, backing_hd, &child_backing);
bs->open_flags &= ~BDRV_O_NO_BACKING;
- pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
+ bdrv_filename(backing_hd, bs->backing_file, sizeof(bs->backing_file));
pstrcpy(bs->backing_format, sizeof(bs->backing_format),
backing_hd->drv ? backing_hd->drv->format_name : "");
@@ -1559,7 +1564,7 @@ static int bdrv_open_inherit(BlockDriverState **pbs, const char *filename,
}
}
- bdrv_filename(bs, bs->filename, sizeof(bs->filename));
+ bdrv_refresh_filename(bs);
/* For snapshot=on, create a temporary qcow2 overlay. bs points to the
* temporary snapshot afterwards. */
@@ -1823,8 +1828,10 @@ int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
if (local_err != NULL) {
error_propagate(errp, local_err);
} else {
+ char *filename = bdrv_filename_alloc(reopen_state->bs);
error_setg(errp, "failed while preparing to reopen image '%s'",
- reopen_state->bs->filename);
+ filename);
+ g_free(filename);
}
goto error;
}
@@ -2441,6 +2448,7 @@ int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
BlockDriverState *base_bs = NULL;
BlockDriverState *new_top_bs = NULL;
BlkIntermediateStates *intermediate_state, *next;
+ char *base_filename = NULL;
int ret = -EIO;
QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
@@ -2487,7 +2495,10 @@ int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
}
/* success - we can delete the intermediate states, and link top->base */
- backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
+ if (!backing_file_str) {
+ base_filename = bdrv_filename_alloc(base_bs);
+ backing_file_str = base_filename;
+ }
ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
base_bs->drv ? base_bs->drv->format_name : "");
if (ret) {
@@ -2506,6 +2517,7 @@ exit:
QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
g_free(intermediate_state);
}
+ g_free(base_filename);
return ret;
}
@@ -2994,8 +3006,7 @@ char *bdrv_get_encrypted_filename(BlockDriverState *bs, char *dest, size_t sz)
pstrcpy(dest, sz, bs->backing_file);
return dest;
} else if (bs->encrypted) {
- pstrcpy(dest, sz, bs->filename);
- return dest;
+ return bdrv_filename(bs, dest, sz);
} else {
dest[0] = '\0';
return NULL;
@@ -3096,7 +3107,7 @@ int bdrv_is_snapshot(BlockDriverState *bs)
}
/* backing_file can either be relative, or absolute, or a protocol. If it is
- * relative, it must be relative to the chain. So, passing in bs->filename
+ * relative, it must be relative to the chain. So, passing in the filename
* from a BDS as backing_file should not be done, as that may be relative to
* the CWD rather than the chain. */
BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
@@ -3131,18 +3142,20 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
} else {
/* If not an absolute filename path, make it relative to the current
* image's filename path */
- path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
- backing_file);
+ char *curr_filename = bdrv_filename_alloc(curr_bs);
+ path_combine(filename_tmp, PATH_MAX, curr_filename, backing_file);
/* We are going to compare absolute pathnames */
if (!realpath(filename_tmp, filename_full)) {
+ g_free(curr_filename);
continue;
}
/* We need to make sure the backing filename we are comparing against
* is relative to the current image filename (or absolute) */
- path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
+ path_combine(filename_tmp, PATH_MAX, curr_filename,
curr_bs->backing_file);
+ g_free(curr_filename);
if (!realpath(filename_tmp, backing_file_full)) {
continue;
diff --git a/block/blkverify.c b/block/blkverify.c
index cb9ce02..d277e63 100644
--- a/block/blkverify.c
+++ b/block/blkverify.c
@@ -309,8 +309,7 @@ static void blkverify_refresh_filename(BlockDriverState *bs)
BDRVBlkverifyState *s = bs->opaque;
/* bs->file has already been refreshed */
- bdrv_filename(s->test_file, s->test_file->filename,
- sizeof(s->test_file->filename));
+ bdrv_refresh_filename(s->test_file);
if (bs->file->full_open_options && s->test_file->full_open_options) {
QDict *opts = qdict_new();
diff --git a/block/commit.c b/block/commit.c
index 7312a5b..524cb2e 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -227,7 +227,9 @@ void commit_start(BlockDriverState *bs, BlockDriverState *base,
overlay_bs = bdrv_find_overlay(bs, top);
if (overlay_bs == NULL) {
- error_setg(errp, "Could not find overlay image for %s:", top->filename);
+ char *top_filename = bdrv_filename_alloc(top);
+ error_setg(errp, "Could not find overlay image for %s:", top_filename);
+ g_free(top_filename);
return;
}
diff --git a/block/mirror.c b/block/mirror.c
index fc4d8f5..11a8d1b 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -781,25 +781,33 @@ void commit_active_start(BlockDriverState *bs, BlockDriverState *base,
length = bdrv_getlength(bs);
if (length < 0) {
- error_setg_errno(errp, -length,
- "Unable to determine length of %s", bs->filename);
+ char *filename = bdrv_filename_alloc(bs);
+ error_setg_errno(errp, -length, "Unable to determine length of %s",
+ filename);
+ g_free(filename);
goto error_restore_flags;
}
base_length = bdrv_getlength(base);
if (base_length < 0) {
+ char *base_filename = bdrv_filename_alloc(base);
error_setg_errno(errp, -base_length,
- "Unable to determine length of %s", base->filename);
+ "Unable to determine length of %s", base_filename);
+ g_free(base_filename);
goto error_restore_flags;
}
if (length > base_length) {
ret = bdrv_truncate(base, length);
if (ret < 0) {
+ char *filename = bdrv_filename_alloc(bs);
+ char *base_filename = bdrv_filename_alloc(base);
error_setg_errno(errp, -ret,
"Top image %s is larger than base image %s, and "
"resize of base image failed",
- bs->filename, base->filename);
+ filename, base_filename);
+ g_free(filename);
+ g_free(base_filename);
goto error_restore_flags;
}
}
diff --git a/block/qapi.c b/block/qapi.c
index 2ce5097..1078d7e 100644
--- a/block/qapi.c
+++ b/block/qapi.c
@@ -38,7 +38,7 @@ BlockDeviceInfo *bdrv_block_device_info(BlockDriverState *bs, Error **errp)
BlockDriverState *bs0;
BlockDeviceInfo *info = g_malloc0(sizeof(*info));
- info->file = g_strdup(bs->filename);
+ info->file = bdrv_filename_alloc(bs);
info->ro = bs->read_only;
info->drv = g_strdup(bs->drv->format_name);
info->encrypted = bs->encrypted;
@@ -218,7 +218,7 @@ void bdrv_query_image_info(BlockDriverState *bs,
}
info = g_new0(ImageInfo, 1);
- info->filename = g_strdup(bs->filename);
+ info->filename = bdrv_filename_alloc(bs);
info->format = g_strdup(bdrv_get_format_name(bs));
info->virtual_size = size;
info->actual_size = bdrv_get_allocated_file_size(bs);
diff --git a/block/quorum.c b/block/quorum.c
index 00d1fb0..2f6c45f 100644
--- a/block/quorum.c
+++ b/block/quorum.c
@@ -1003,7 +1003,7 @@ static void quorum_refresh_filename(BlockDriverState *bs)
int i;
for (i = 0; i < s->num_children; i++) {
- bdrv_filename(s->bs[i], s->bs[i]->filename, sizeof(s->bs[i]->filename));
+ bdrv_refresh_filename(s->bs[i]);
if (!s->bs[i]->full_open_options) {
return;
}
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 10f8f62..17daf06 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -512,12 +512,14 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
goto fail;
}
if (!s->use_aio && (bdrv_flags & BDRV_O_NATIVE_AIO)) {
+ char *filename = bdrv_filename_alloc(bs);
error_printf("WARNING: aio=native was specified for '%s', but "
"it requires cache.direct=on, which was not "
"specified. Falling back to aio=threads.\n"
" This will become an error condition in "
"future QEMU versions.\n",
- bs->filename);
+ filename);
+ g_free(filename);
}
#endif
@@ -2100,9 +2102,13 @@ static bool hdev_is_sg(BlockDriverState *bs)
struct stat st;
struct sg_scsi_id scsiid;
- int sg_version;
+ int sg_version, ret;
+ char *filename = bdrv_filename_alloc(bs);
- if (stat(bs->filename, &st) >= 0 && S_ISCHR(st.st_mode) &&
+ ret = stat(filename, &st);
+ g_free(filename);
+
+ if (ret >= 0 && S_ISCHR(st.st_mode) &&
!bdrv_ioctl(bs, SG_GET_VERSION_NUM, &sg_version) &&
!bdrv_ioctl(bs, SG_GET_SCSI_ID, &scsiid)) {
DPRINTF("SG device found: type=%d, version=%d\n",
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
index e3d2d04..30df852 100644
--- a/block/raw_bsd.c
+++ b/block/raw_bsd.c
@@ -210,6 +210,7 @@ static int raw_open(BlockDriverState *bs, QDict *options, int flags,
bs->sg = bs->file->sg;
if (bs->probed && !bdrv_is_read_only(bs)) {
+ char *filename = bdrv_filename_alloc(bs->file);
fprintf(stderr,
"WARNING: Image format was not specified for '%s' and probing "
"guessed raw.\n"
@@ -217,7 +218,8 @@ static int raw_open(BlockDriverState *bs, QDict *options, int flags,
"raw images, write operations on block 0 will be restricted.\n"
" Specify the 'raw' format explicitly to remove the "
"restrictions.\n",
- bs->file->filename);
+ filename);
+ g_free(filename);
}
return 0;
diff --git a/block/vhdx-log.c b/block/vhdx-log.c
index 47fec63..629c1ed 100644
--- a/block/vhdx-log.c
+++ b/block/vhdx-log.c
@@ -782,13 +782,16 @@ int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed,
if (logs.valid) {
if (bs->read_only) {
+ char *filename = bdrv_filename_alloc(bs);
+
ret = -EPERM;
error_setg_errno(errp, EPERM,
"VHDX image file '%s' opened read-only, but "
"contains a log that needs to be replayed. To "
"replay the log, execute:\n qemu-img check -r "
"all '%s'",
- bs->filename, bs->filename);
+ filename, filename);
+ g_free(filename);
goto exit;
}
/* now flush the log */
diff --git a/block/vmdk.c b/block/vmdk.c
index fbaab67..1981281 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -444,9 +444,11 @@ static int vmdk_init_tables(BlockDriverState *bs, VmdkExtent *extent,
extent->l1_table,
l1_size);
if (ret < 0) {
+ char *extent_filename = bdrv_filename_alloc(extent->file);
error_setg_errno(errp, -ret,
"Could not read l1 table from extent '%s'",
- extent->file->filename);
+ extent_filename);
+ g_free(extent_filename);
goto fail_l1;
}
for (i = 0; i < extent->l1_size; i++) {
@@ -464,9 +466,11 @@ static int vmdk_init_tables(BlockDriverState *bs, VmdkExtent *extent,
extent->l1_backup_table,
l1_size);
if (ret < 0) {
+ char *extent_filename = bdrv_filename_alloc(extent->file);
error_setg_errno(errp, -ret,
"Could not read l1 backup table from extent '%s'",
- extent->file->filename);
+ extent_filename);
+ g_free(extent_filename);
goto fail_l1b;
}
for (i = 0; i < extent->l1_size; i++) {
@@ -495,9 +499,11 @@ static int vmdk_open_vmfs_sparse(BlockDriverState *bs,
ret = bdrv_pread(file, sizeof(magic), &header, sizeof(header));
if (ret < 0) {
+ char *filename = bdrv_filename_alloc(file);
error_setg_errno(errp, -ret,
"Could not read header from file '%s'",
- file->filename);
+ filename);
+ g_free(filename);
return ret;
}
ret = vmdk_add_extent(bs, file, false,
@@ -572,9 +578,11 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
ret = bdrv_pread(file, sizeof(magic), &header, sizeof(header));
if (ret < 0) {
+ char *filename = bdrv_filename_alloc(file);
error_setg_errno(errp, -ret,
"Could not read header from file '%s'",
- file->filename);
+ filename);
+ g_free(filename);
return -EINVAL;
}
if (header.capacity == 0) {
@@ -818,8 +826,10 @@ static int vmdk_parse_extents(const char *desc, BlockDriverState *bs,
if (!path_is_absolute(fname) && !path_has_protocol(fname) &&
!desc_file_path[0])
{
+ char *filename = bdrv_filename_alloc(bs->file);
error_setg(errp, "Cannot use relative extent paths with VMDK "
- "descriptor file '%s'", bs->file->filename);
+ "descriptor file '%s'", filename);
+ g_free(filename);
return -EINVAL;
}
@@ -2086,7 +2096,7 @@ static ImageInfo *vmdk_get_extent_info(VmdkExtent *extent)
ImageInfo *info = g_new0(ImageInfo, 1);
*info = (ImageInfo){
- .filename = g_strdup(extent->file->filename),
+ .filename = bdrv_filename_alloc(extent->file),
.format = g_strdup(extent->type),
.virtual_size = extent->sectors * BDRV_SECTOR_SIZE,
.compressed = extent->compressed,
diff --git a/block/vpc.c b/block/vpc.c
index 3e385d9..064b2f8 100644
--- a/block/vpc.c
+++ b/block/vpc.c
@@ -204,9 +204,12 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,
checksum = be32_to_cpu(footer->checksum);
footer->checksum = 0;
- if (vpc_checksum(s->footer_buf, HEADER_SIZE) != checksum)
+ if (vpc_checksum(s->footer_buf, HEADER_SIZE) != checksum) {
+ char *filename = bdrv_filename_alloc(bs);
fprintf(stderr, "block-vpc: The header checksum of '%s' is "
- "incorrect.\n", bs->filename);
+ "incorrect.\n", filename);
+ g_free(filename);
+ }
/* Write 'checksum' back to footer, or else will leave it with zero. */
footer->checksum = cpu_to_be32(checksum);
diff --git a/blockdev.c b/blockdev.c
index 62a4586..54a1c24 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -227,10 +227,12 @@ bool drive_check_orphaned(void)
/* Unless this is a default drive, this may be an oversight. */
if (!blk_get_attached_dev(blk) && !dinfo->is_default &&
dinfo->type != IF_NONE) {
+ char *filename = bdrv_filename_alloc(blk_bs(blk));
fprintf(stderr, "Warning: Orphaned drive without device: "
"id=%s,file=%s,if=%s,bus=%d,unit=%d\n",
- blk_name(blk), blk_bs(blk)->filename, if_name[dinfo->type],
+ blk_name(blk), filename, if_name[dinfo->type],
dinfo->bus, dinfo->unit);
+ g_free(filename);
rs = true;
}
}
@@ -1507,10 +1509,12 @@ static void external_snapshot_prepare(BlkTransactionState *common,
/* create new image w/backing file */
if (mode != NEW_IMAGE_MODE_EXISTING) {
+ char *old_filename = bdrv_filename_alloc(state->old_bs);
bdrv_img_create(new_image_file, format,
- state->old_bs->filename,
+ old_filename,
state->old_bs->drv->format_name,
NULL, -1, flags, &local_err, false);
+ g_free(old_filename);
if (local_err) {
error_propagate(errp, local_err);
return;
@@ -2388,9 +2392,11 @@ void qmp_block_commit(const char *device,
top_bs = bs;
if (has_top && top) {
- if (strcmp(bs->filename, top) != 0) {
+ char *filename = bdrv_filename_alloc(bs);
+ if (strcmp(filename, top) != 0) {
top_bs = bdrv_find_backing_image(bs, top);
}
+ g_free(filename);
}
if (top_bs == NULL) {
@@ -2536,9 +2542,11 @@ void qmp_drive_backup(const char *device, const char *target,
if (mode != NEW_IMAGE_MODE_EXISTING) {
assert(format && drv);
if (source) {
- bdrv_img_create(target, format, source->filename,
+ char *source_filename = bdrv_filename_alloc(source);
+ bdrv_img_create(target, format, source_filename,
source->drv->format_name, NULL,
size, flags, &local_err, false);
+ g_free(source_filename);
} else {
bdrv_img_create(target, format, NULL, NULL, NULL,
size, flags, &local_err, false);
@@ -2781,15 +2789,19 @@ void qmp_drive_mirror(const char *device, const char *target,
bdrv_img_create(target, format,
NULL, NULL, NULL, size, flags, &local_err, false);
} else {
+ char *source_filename;
+
switch (mode) {
case NEW_IMAGE_MODE_EXISTING:
break;
case NEW_IMAGE_MODE_ABSOLUTE_PATHS:
/* create new image with backing file */
+ source_filename = bdrv_filename_alloc(source);
bdrv_img_create(target, format,
- source->filename,
+ source_filename,
source->drv->format_name,
NULL, size, flags, &local_err, false);
+ g_free(source_filename);
break;
default:
abort();
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 14ad4c3..677c05a 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -370,7 +370,6 @@ struct BlockDriverState {
* regarding this BDS's context */
QLIST_HEAD(, BdrvAioNotifier) aio_notifiers;
- char filename[PATH_MAX];
char backing_file[PATH_MAX]; /* if non zero, the image is a diff of
this file image */
char backing_format[16]; /* if non-zero and backing_file exists */
--
2.4.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PATCH v3 5/5] iotests: Test changed Quorum filename
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
` (3 preceding siblings ...)
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename Max Reitz
@ 2015-08-12 15:48 ` Max Reitz
2015-08-13 15:30 ` [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Kevin Wolf
5 siblings, 0 replies; 9+ messages in thread
From: Max Reitz @ 2015-08-12 15:48 UTC (permalink / raw)
To: qemu-block; +Cc: Kevin Wolf, qemu-devel, Max Reitz
After drive-mirror replacing a Quorum child, the filename of the Quorum
BDS should reflect the change. This patch replaces the existing test for
whether the operation did actually exchange the BDS (which simply tested
whether the new BDS existed) by a test which examines the children list
contained in the Quorum BDS's filename as returned by query-block.
As a nice side effect of confirming that the new BDS actually belongs to
the Quorum BDS, this checks whether the filename was properly updated.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/041 | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/tests/qemu-iotests/041 b/tests/qemu-iotests/041
index 3d46ed7..316f42a 100755
--- a/tests/qemu-iotests/041
+++ b/tests/qemu-iotests/041
@@ -18,6 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
+import json
import time
import os
import iotests
@@ -908,10 +909,18 @@ class TestRepairQuorum(iotests.QMPTestCase):
self.assert_qmp(result, 'return', {})
self.complete_and_wait(drive="quorum0")
- result = self.vm.qmp('query-named-block-nodes')
- self.assert_qmp(result, 'return[0]/file', quorum_repair_img)
- # TODO: a better test requiring some QEMU infrastructure will be added
- # to check that this file is really driven by quorum
+
+ result = self.vm.qmp('query-block')
+ for blockdev in result['return']:
+ if blockdev['device'] == 'quorum0':
+ filename = blockdev['inserted']['image']['filename']
+ self.assertEquals(filename[:5], 'json:')
+ children = json.loads(filename[5:])['children']
+ self.assertEquals(children[0]['file']['filename'], quorum_img1)
+ self.assertEquals(children[1]['file']['filename'],
+ quorum_repair_img)
+ self.assertEquals(children[2]['file']['filename'], quorum_img3)
+
self.vm.shutdown()
if __name__ == '__main__':
--
2.4.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename Max Reitz
@ 2015-08-13 14:59 ` Kevin Wolf
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2015-08-13 14:59 UTC (permalink / raw)
To: Max Reitz; +Cc: qemu-devel, qemu-block
Am 12.08.2015 um 17:48 hat Max Reitz geschrieben:
> In places which directly pass a filename to the OS, we should not use
> the filename field at all but exact_filename instead (although the
> former currently equals the latter if that is set).
>
> In qemu-img's map command, we should be using the filename field; but
> since this commit prepares to remove that field, using exact_filename is
> fine, too (this is the only user of BlockDriverState.filename which
> frequently queries that field).
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> diff --git a/qemu-img.c b/qemu-img.c
> index 75f4ee4..3d5587a 100644
> --- a/qemu-img.c
> +++ b/qemu-img.c
> @@ -2155,7 +2155,7 @@ static void dump_map_entry(OutputFormat output_format, MapEntry *e,
> }
> if ((e->flags & (BDRV_BLOCK_DATA|BDRV_BLOCK_ZERO)) == BDRV_BLOCK_DATA) {
> printf("%#-16"PRIx64"%#-16"PRIx64"%#-16"PRIx64"%s\n",
> - e->start, e->length, e->offset, e->bs->filename);
> + e->start, e->length, e->offset, e->bs->exact_filename);
> }
> /* This format ignores the distinction between 0, ZERO and ZERO|DATA.
> * Modify the flags here to allow more coalescing.
Before this patch:
$ ./qemu-img map 'json:{"driver":"blkdebug","align":512,"image":{"filename":"/tmp/test.qcow2"}}'
Offset Length Mapped to File
0 0x15d100000 0 json:{"image": {"driver": "file", "filename": "/tmp/test.qcow2"}, "driver": "blkdebug", "align": 512}
After the patch:
$ ./qemu-img map 'json:{"driver":"blkdebug","align":512,"image":{"filename":"/tmp/test.qcow2"}}'
Offset Length Mapped to File
0 0x15d100000 0
I don't think we can use bs->exact_filename here.
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename Max Reitz
@ 2015-08-13 15:28 ` Kevin Wolf
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2015-08-13 15:28 UTC (permalink / raw)
To: Max Reitz; +Cc: qemu-devel, qemu-block
Am 12.08.2015 um 17:48 hat Max Reitz geschrieben:
> That field is now only used during initialization of BlockDriverStates
> (opening images) and for error or warning messages. Performance is not
> that much of an issue here, so we can drop the field and replace its use
> by a call to bdrv_filename() or bdrv_filename_alloc(). By doing so we
> can ensure the result always to be recent, whereas the contents of
> BlockDriverState.filename may have been obsoleted by manipulations of
> single BlockDriverStates or of the BDS graph.
>
> The users of the BDS filename field were changed as follows:
> - copying the filename into another buffer is trivially replaced by
> using bdrv_filename() instead of the copy function
> - strdup() on the filename is replaced by a call to
> bdrv_filename_alloc()
> - bdrv_filename(bs, bs->filename, sizeof(bs->filename)) is replaced by
> bdrv_refresh_filename(bs)
> (these were introduced by the previous patch)
> - anywhere else bdrv_filename_alloc() is used, any access to
> BlockDriverState.filename is then replaced by the buffer returned, and
> it is freed when it is no longer needed
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> diff --git a/block/raw-posix.c b/block/raw-posix.c
> index 10f8f62..17daf06 100644
> --- a/block/raw-posix.c
> +++ b/block/raw-posix.c
> @@ -512,12 +512,14 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
> goto fail;
> }
> if (!s->use_aio && (bdrv_flags & BDRV_O_NATIVE_AIO)) {
> + char *filename = bdrv_filename_alloc(bs);
> error_printf("WARNING: aio=native was specified for '%s', but "
> "it requires cache.direct=on, which was not "
> "specified. Falling back to aio=threads.\n"
> " This will become an error condition in "
> "future QEMU versions.\n",
> - bs->filename);
> + filename);
> + g_free(filename);
> }
> #endif
This variable shadows the existing local variable filename, which
already contains the right string (if we want the normalised name in the
error message, which seems to make sense to me).
> @@ -2100,9 +2102,13 @@ static bool hdev_is_sg(BlockDriverState *bs)
>
> struct stat st;
> struct sg_scsi_id scsiid;
> - int sg_version;
> + int sg_version, ret;
> + char *filename = bdrv_filename_alloc(bs);
>
> - if (stat(bs->filename, &st) >= 0 && S_ISCHR(st.st_mode) &&
> + ret = stat(filename, &st);
> + g_free(filename);
> +
> + if (ret >= 0 && S_ISCHR(st.st_mode) &&
> !bdrv_ioctl(bs, SG_GET_VERSION_NUM, &sg_version) &&
> !bdrv_ioctl(bs, SG_GET_SCSI_ID, &scsiid)) {
> DPRINTF("SG device found: type=%d, version=%d\n",
Here we don't have the filename in a local string, but for raw-posix, I
think bs->exact_filename should be reliably set. This is also another
option above if you don't want to print the normalised filename.
> diff --git a/block/vpc.c b/block/vpc.c
> index 3e385d9..064b2f8 100644
> --- a/block/vpc.c
> +++ b/block/vpc.c
> @@ -204,9 +204,12 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,
>
> checksum = be32_to_cpu(footer->checksum);
> footer->checksum = 0;
> - if (vpc_checksum(s->footer_buf, HEADER_SIZE) != checksum)
> + if (vpc_checksum(s->footer_buf, HEADER_SIZE) != checksum) {
> + char *filename = bdrv_filename_alloc(bs);
> fprintf(stderr, "block-vpc: The header checksum of '%s' is "
> - "incorrect.\n", bs->filename);
> + "incorrect.\n", filename);
> + g_free(filename);
> + }
Here the filename shouldn't be included in the error message in the
first place, but that's a separate patch on top.
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
` (4 preceding siblings ...)
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 5/5] iotests: Test changed Quorum filename Max Reitz
@ 2015-08-13 15:30 ` Kevin Wolf
5 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2015-08-13 15:30 UTC (permalink / raw)
To: Max Reitz; +Cc: qemu-devel, qemu-block
Am 12.08.2015 um 17:48 hat Max Reitz geschrieben:
> The BDS filename field is generally only used when opening disk images
> or emitting error or warning messages, the only exception to this rule
> is the map command of qemu-img. However, using exact_filename there
> instead should not be a problem. Therefore, we can drop the filename
> field from the BlockDriverState and use a function instead which builds
> the filename from scratch when called.
>
> This is slower than reading a static char array but the problem of that
> static array is that it may become obsolete due to changes in any
> BlockDriverState or in the BDS graph. Using a function which rebuilds
> the filename every time it is called resolves this problem.
>
> The disadvantage of worse performance is negligible, on the other hand.
> After patch 2 of this series, which replaces some queries of
> BDS.filename by reads from somewhere else (mostly BDS.exact_filename),
> the filename field is only used when a disk image is opened or some
> message should be emitted, both of which cases do not suffer from the
> performance hit.
Apart from patch 2:
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-08-13 15:30 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-12 15:48 [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 1/5] block: Change bdrv_get_encrypted_filename() Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 2/5] block: Avoid BlockDriverState.filename Max Reitz
2015-08-13 14:59 ` Kevin Wolf
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 3/5] block: Add bdrv_filename() Max Reitz
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 4/5] block: Drop BlockDriverState.filename Max Reitz
2015-08-13 15:28 ` Kevin Wolf
2015-08-12 15:48 ` [Qemu-devel] [PATCH v3 5/5] iotests: Test changed Quorum filename Max Reitz
2015-08-13 15:30 ` [Qemu-devel] [PATCH v3 0/5] block: Drop BDS.filename Kevin Wolf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).