From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, schwab@linux-m68k.org,
laurent@vivier.eu, gerg@uclinux.org
Subject: [Qemu-devel] [PATCH 10/11] target-m68k: Inline shifts
Date: Fri, 14 Aug 2015 07:59:25 -0700 [thread overview]
Message-ID: <1439564366-11633-11-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1439564366-11633-1-git-send-email-rth@twiddle.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
target-m68k/helper.c | 52 ---------------------------
target-m68k/helper.h | 3 --
target-m68k/translate.c | 94 +++++++++++++++++++++++++++++++++++++------------
3 files changed, 72 insertions(+), 77 deletions(-)
diff --git a/target-m68k/helper.c b/target-m68k/helper.c
index ff7e481..6bd80a5 100644
--- a/target-m68k/helper.c
+++ b/target-m68k/helper.c
@@ -322,58 +322,6 @@ void HELPER(set_sr)(CPUM68KState *env, uint32_t val)
m68k_switch_sp(env);
}
-uint32_t HELPER(shl_cc)(CPUM68KState *env, uint32_t val, uint32_t shift)
-{
- uint64_t result;
-
- shift &= 63;
- result = (uint64_t)val << shift;
-
- env->cc_c = (result >> 32) & 1;
- env->cc_n = result;
- env->cc_z = result;
- env->cc_v = 0;
- env->cc_x = shift ? env->cc_c : env->cc_x;
-
- return result;
-}
-
-uint32_t HELPER(shr_cc)(CPUM68KState *env, uint32_t val, uint32_t shift)
-{
- uint64_t temp;
- uint32_t result;
-
- shift &= 63;
- temp = (uint64_t)val << 32 >> shift;
- result = temp >> 32;
-
- env->cc_c = (temp >> 31) & 1;
- env->cc_n = result;
- env->cc_z = result;
- env->cc_v = 0;
- env->cc_x = shift ? env->cc_c : env->cc_x;
-
- return result;
-}
-
-uint32_t HELPER(sar_cc)(CPUM68KState *env, uint32_t val, uint32_t shift)
-{
- uint64_t temp;
- uint32_t result;
-
- shift &= 63;
- temp = (int64_t)val << 32 >> shift;
- result = temp >> 32;
-
- env->cc_c = (temp >> 31) & 1;
- env->cc_n = result;
- env->cc_z = result;
- env->cc_v = result ^ val;
- env->cc_x = shift ? env->cc_c : env->cc_x;
-
- return result;
-}
-
/* FPU helpers. */
uint32_t HELPER(f64_to_i32)(CPUM68KState *env, float64 val)
{
diff --git a/target-m68k/helper.h b/target-m68k/helper.h
index c868148..9985f9b 100644
--- a/target-m68k/helper.h
+++ b/target-m68k/helper.h
@@ -5,9 +5,6 @@ DEF_HELPER_2(divu, void, env, i32)
DEF_HELPER_2(divs, void, env, i32)
DEF_HELPER_3(addx_cc, i32, env, i32, i32)
DEF_HELPER_3(subx_cc, i32, env, i32, i32)
-DEF_HELPER_3(shl_cc, i32, env, i32, i32)
-DEF_HELPER_3(shr_cc, i32, env, i32, i32)
-DEF_HELPER_3(sar_cc, i32, env, i32, i32)
DEF_HELPER_2(set_sr, void, env, i32)
DEF_HELPER_3(movec, void, env, i32, i32)
diff --git a/target-m68k/translate.c b/target-m68k/translate.c
index 19097c2..a536054 100644
--- a/target-m68k/translate.c
+++ b/target-m68k/translate.c
@@ -2060,48 +2060,98 @@ DISAS_INSN(addx)
gen_helper_addx_cc(reg, cpu_env, reg, src);
}
-/* TODO: This could be implemented without helper functions. */
DISAS_INSN(shift_im)
{
- TCGv reg;
- int tmp;
- TCGv shift;
+ TCGv reg = DREG(insn, 0);
+ int count = (insn >> 9) & 7;
+ int arith = insn & 8;
- set_cc_op(s, CC_OP_FLAGS);
+ if (count == 0) {
+ count = 8;
+ }
- reg = DREG(insn, 0);
- tmp = (insn >> 9) & 7;
- if (tmp == 0)
- tmp = 8;
- shift = tcg_const_i32(tmp);
- /* No need to flush flags becuse we know we will set C flag. */
if (insn & 0x100) {
- gen_helper_shl_cc(reg, cpu_env, reg, shift);
+ tcg_gen_shri_i32(QREG_CC_C, reg, 31 - count);
+ tcg_gen_shli_i32(QREG_CC_N, reg, count);
} else {
- if (insn & 8) {
- gen_helper_shr_cc(reg, cpu_env, reg, shift);
+ tcg_gen_shri_i32(QREG_CC_C, reg, count - 1);
+ if (arith) {
+ tcg_gen_sari_i32(QREG_CC_N, reg, count);
} else {
- gen_helper_sar_cc(reg, cpu_env, reg, shift);
+ tcg_gen_shri_i32(QREG_CC_N, reg, count);
}
}
+ tcg_gen_andi_i32(QREG_CC_C, QREG_CC_C, 1);
+ tcg_gen_mov_i32(QREG_CC_Z, QREG_CC_N);
+ tcg_gen_mov_i32(QREG_CC_X, QREG_CC_C);
+
+ /* Note that ColdFire always clears V, while M68000 sets it for
+ a change in the sign bit. */
+ if (arith && m68k_feature(s->env, M68K_FEATURE_M68000)) {
+ tcg_gen_xor_i32(QREG_CC_V, QREG_CC_N, reg);
+ } else {
+ tcg_gen_movi_i32(QREG_CC_V, 0);
+ }
+
+ tcg_gen_mov_i32(reg, QREG_CC_N);
+ set_cc_op(s, CC_OP_FLAGS);
}
DISAS_INSN(shift_reg)
{
- TCGv reg;
- TCGv shift;
+ TCGv reg, s32;
+ TCGv_i64 t64, s64;
+ int arith = insn & 8;
reg = DREG(insn, 0);
- shift = DREG(insn, 9);
+ t64 = tcg_temp_new_i64();
+ s64 = tcg_temp_new_i64();
+ s32 = tcg_temp_new();
+
+ /* Note that m68k truncates the shift count modulo 64, not 32.
+ In addition, a 64-bit shift makes it easy to find "the last
+ bit shifted out", for the carry flag. */
+ tcg_gen_andi_i32(s32, DREG(insn, 9), 63);
+ tcg_gen_extu_i32_i64(s64, s32);
+
+ /* Non-arithmetic shift clears V. Use it as a source zero here. */
+ tcg_gen_movi_i32(QREG_CC_V, 0);
+
if (insn & 0x100) {
- gen_helper_shl_cc(reg, cpu_env, reg, shift);
+ tcg_gen_extu_i32_i64(t64, reg);
+ tcg_gen_shl_i64(t64, t64, s64);
+ tcg_temp_free_i64(s64);
+ tcg_gen_extr_i64_i32(QREG_CC_N, QREG_CC_C, t64);
+ tcg_temp_free_i64(t64);
+ tcg_gen_andi_i32(QREG_CC_C, QREG_CC_C, 1);
} else {
- if (insn & 8) {
- gen_helper_shr_cc(reg, cpu_env, reg, shift);
+ tcg_gen_extu_i32_i64(t64, reg);
+ tcg_gen_shli_i64(t64, t64, 32);
+ if (arith) {
+ tcg_gen_sar_i64(t64, t64, s64);
} else {
- gen_helper_sar_cc(reg, cpu_env, reg, shift);
+ tcg_gen_shr_i64(t64, t64, s64);
}
+ tcg_temp_free_i64(s64);
+ tcg_gen_extr_i64_i32(QREG_CC_C, QREG_CC_N, t64);
+ tcg_temp_free_i64(t64);
+ tcg_gen_shri_i32(QREG_CC_C, QREG_CC_C, 31);
}
+ tcg_gen_mov_i32(QREG_CC_Z, QREG_CC_N);
+
+ /* Note that X = C, but only if the shift count was non-zero. */
+ tcg_gen_movcond_i32(TCG_COND_NE, QREG_CC_X, s32, QREG_CC_V,
+ QREG_CC_C, QREG_CC_X);
+ tcg_temp_free(s32);
+
+ /* Note that ColdFire always clears V (which we have done above),
+ while M68000 sets it for a change in the sign bit. */
+ if (arith && m68k_feature(s->env, M68K_FEATURE_M68000)) {
+ tcg_gen_xor_i32(QREG_CC_V, QREG_CC_N, reg);
+ }
+
+ /* Write back the result. */
+ tcg_gen_mov_i32(reg, QREG_CC_N);
set_cc_op(s, CC_OP_FLAGS);
}
--
2.4.3
next prev parent reply other threads:[~2015-08-14 15:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-14 14:59 [Qemu-devel] [PATCH 00/11] Proposed format for m68k flags Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 01/11] target-m68k: Print flags properly Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 02/11] target-m68k: Some fixes to SR and flags management Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 03/11] target-m68k: Remove incorrect clearing of cc_x Richard Henderson
2015-08-14 17:04 ` Andreas Schwab
2015-08-14 23:10 ` Richard Henderson
2015-08-15 6:25 ` Andreas Schwab
2015-08-14 14:59 ` [Qemu-devel] [PATCH 04/11] target-m68k: Replace helper_xflag_lt with setcond Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 05/11] target-m68k: Reorg flags handling Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 06/11] target-m68k: Introduce DisasCompare Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 07/11] target-m68k: Use setcond for scc Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 08/11] target-m68k: Optimize some comparisons Richard Henderson
2015-08-14 14:59 ` [Qemu-devel] [PATCH 09/11] target-m68k: Optimize gen_flush_flags Richard Henderson
2015-08-14 14:59 ` Richard Henderson [this message]
2015-08-14 14:59 ` [Qemu-devel] [PATCH 11/11] target-m68k: Inline addx, subx, negx Richard Henderson
2015-08-14 15:37 ` [Qemu-devel] [PATCH 00/11] Proposed format for m68k flags Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439564366-11633-11-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=gerg@uclinux.org \
--cc=laurent@vivier.eu \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=schwab@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).