[Qemu-devel] [RESEND PATCHv2] sdhci: Pass drive parameter to sdhci-pci via qdev property

[Kevin O'Connor <kevin@koconnor.net>]

Commit 19109131 disabled the sdhci-pci support because it used
drive_get_next().  This patch reenables sdhci-pci and changes it to
pass the drive via a qdev property - for example:
 -device sdhci-pci,drive=drive0 -drive id=drive0,if=sd,file=myimage

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---

This is a resend of the patch I sent two weeks ago.  No changes (other
than adding Stefan's reviewed-by line).

v2:
- Don't call blk_detach_dev() in sdhci pci code - instead change
  sd_init() to use blk_attach_dev() instead of blk_attach_dev_nofail().

---
 hw/sd/sd.c    |  4 +++-
 hw/sd/sdhci.c | 32 +++++++++++++++++++-------------
 hw/sd/sdhci.h |  2 ++
 3 files changed, 24 insertions(+), 14 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index a1ff465..88c4fda 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -493,7 +493,9 @@ SDState *sd_init(BlockBackend *blk, bool is_spi)
     sd->blk = blk;
     sd_reset(sd);
     if (sd->blk) {
-        blk_attach_dev_nofail(sd->blk, sd);
+        /* Attach dev if not already attached.  (This call ignores an
+         * error return code if sd->blk is already attached.) */
+        blk_attach_dev(sd->blk, sd);
         blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
     }
     vmstate_register(NULL, -1, &sd_vmstate, sd);
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index e63367b..6e01de7 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1142,13 +1142,9 @@ static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
     }
 }
 
-static void sdhci_initfn(SDHCIState *s)
+static void sdhci_initfn(SDHCIState *s, BlockBackend *blk)
 {
-    DriveInfo *di;
-
-    /* FIXME use a qdev drive property instead of drive_get_next() */
-    di = drive_get_next(IF_SD);
-    s->card = sd_init(di ? blk_by_legacy_dinfo(di) : NULL, false);
+    s->card = sd_init(blk, false);
     if (s->card == NULL) {
         exit(1);
     }
@@ -1214,7 +1210,8 @@ const VMStateDescription sdhci_vmstate = {
 
 /* Capabilities registers provide information on supported features of this
  * specific host controller implementation */
-static Property sdhci_properties[] = {
+static Property sdhci_pci_properties[] = {
+    DEFINE_BLOCK_PROPERTIES(SDHCIState, conf),
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
@@ -1226,7 +1223,7 @@ static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
     SDHCIState *s = PCI_SDHCI(dev);
     dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
     dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
-    sdhci_initfn(s);
+    sdhci_initfn(s, s->conf.blk);
     s->buf_maxsz = sdhci_get_fifolen(s);
     s->fifo_buffer = g_malloc0(s->buf_maxsz);
     s->irq = pci_allocate_irq(dev);
@@ -1253,9 +1250,7 @@ static void sdhci_pci_class_init(ObjectClass *klass, void *data)
     k->class_id = PCI_CLASS_SYSTEM_SDHCI;
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
     dc->vmsd = &sdhci_vmstate;
-    dc->props = sdhci_properties;
-    /* Reason: realize() method uses drive_get_next() */
-    dc->cannot_instantiate_with_device_add_yet = true;
+    dc->props = sdhci_pci_properties;
 }
 
 static const TypeInfo sdhci_pci_info = {
@@ -1265,10 +1260,21 @@ static const TypeInfo sdhci_pci_info = {
     .class_init = sdhci_pci_class_init,
 };
 
+static Property sdhci_sysbus_properties[] = {
+    DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
+            SDHC_CAPAB_REG_DEFAULT),
+    DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void sdhci_sysbus_init(Object *obj)
 {
     SDHCIState *s = SYSBUS_SDHCI(obj);
-    sdhci_initfn(s);
+    DriveInfo *di;
+
+    /* FIXME use a qdev drive property instead of drive_get_next() */
+    di = drive_get_next(IF_SD);
+    sdhci_initfn(s, di ? blk_by_legacy_dinfo(di) : NULL);
 }
 
 static void sdhci_sysbus_finalize(Object *obj)
@@ -1295,7 +1301,7 @@ static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->vmsd = &sdhci_vmstate;
-    dc->props = sdhci_properties;
+    dc->props = sdhci_sysbus_properties;
     dc->realize = sdhci_sysbus_realize;
     /* Reason: instance_init() method uses drive_get_next() */
     dc->cannot_instantiate_with_device_add_yet = true;
diff --git a/hw/sd/sdhci.h b/hw/sd/sdhci.h
index 3352d23..e2de92d 100644
--- a/hw/sd/sdhci.h
+++ b/hw/sd/sdhci.h
@@ -26,6 +26,7 @@
 #define SDHCI_H
 
 #include "qemu-common.h"
+#include "hw/block/block.h"
 #include "hw/pci/pci.h"
 #include "hw/sysbus.h"
 #include "hw/sd.h"
@@ -239,6 +240,7 @@ typedef struct SDHCIState {
     };
     SDState *card;
     MemoryRegion iomem;
+    BlockConf conf;
 
     QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
     QEMUTimer *transfer_timer;
-- 
1.9.3