From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 14/20] smbios: implement smbios support for mach-virt
Date: Tue, 25 Aug 2015 16:00:10 +0100 [thread overview]
Message-ID: <1440514816-16562-15-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1440514816-16562-1-git-send-email-peter.maydell@linaro.org>
From: Wei Huang <wei@redhat.com>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1439485767-20259-3-git-send-email-wei@redhat.com
[PMM: Added missing braces on if ()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
default-configs/arm-softmmu.mak | 1 +
hw/arm/virt.c | 26 ++++++++++++++++++++++++++
qemu-options.hx | 2 +-
3 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 74f1db3..99b41e9 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -102,3 +102,4 @@ CONFIG_XIO3130=y
CONFIG_IOH3420=y
CONFIG_I82801B11=y
CONFIG_ACPI=y
+CONFIG_SMBIOS=y
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index d5a8417..bbd061b 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -50,6 +50,7 @@
#include "hw/arm/fdt.h"
#include "hw/intc/arm_gic_common.h"
#include "kvm_arm.h"
+#include "hw/smbios/smbios.h"
/* Number of external interrupt lines to configure the GIC with */
#define NUM_IRQS 256
@@ -788,12 +789,37 @@ static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size)
return board->fdt;
}
+static void virt_build_smbios(VirtGuestInfo *guest_info)
+{
+ FWCfgState *fw_cfg = guest_info->fw_cfg;
+ uint8_t *smbios_tables, *smbios_anchor;
+ size_t smbios_tables_len, smbios_anchor_len;
+
+ if (!fw_cfg) {
+ return;
+ }
+
+ smbios_set_defaults("QEMU", "QEMU Virtual Machine",
+ "1.0", false, true, SMBIOS_ENTRY_POINT_30);
+
+ smbios_get_tables(NULL, 0, &smbios_tables, &smbios_tables_len,
+ &smbios_anchor, &smbios_anchor_len);
+
+ if (smbios_anchor) {
+ fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables",
+ smbios_tables, smbios_tables_len);
+ fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor",
+ smbios_anchor, smbios_anchor_len);
+ }
+}
+
static
void virt_guest_info_machine_done(Notifier *notifier, void *data)
{
VirtGuestInfoState *guest_info_state = container_of(notifier,
VirtGuestInfoState, machine_done);
virt_acpi_setup(&guest_info_state->info);
+ virt_build_smbios(&guest_info_state->info);
}
static void machvirt_init(MachineState *machine)
diff --git a/qemu-options.hx b/qemu-options.hx
index 77f5853..efce775 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1412,7 +1412,7 @@ DEF("smbios", HAS_ARG, QEMU_OPTION_smbios,
"-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]\n"
" [,asset=str][,part=str][,speed=%d]\n"
" specify SMBIOS type 17 fields\n",
- QEMU_ARCH_I386)
+ QEMU_ARCH_I386 | QEMU_ARCH_ARM)
STEXI
@item -smbios file=@var{binary}
@findex -smbios
--
1.9.1
next prev parent reply other threads:[~2015-08-25 15:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-25 14:59 [Qemu-devel] [PULL 00/20] target-arm queue Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 01/20] xlnx-zynqmp: Connect the four OCM banks Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 02/20] MAINTAINERS: Update Xilinx Maintainership Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 03/20] MAINTAINERS: Add ZynqMP to MAINTAINERS file Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 04/20] target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 05/20] target-arm: Implement missing AMAIR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 06/20] target-arm: Implement missing AFSR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 07/20] target-arm: Implement missing ACTLR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 08/20] target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 09/20] target-arm: Wire up AArch64 EL2 and EL3 address translation ops Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 10/20] target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3 Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 11/20] target-arm: Enable the AArch32 ATS12NSO ops Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 12/20] target-arm: Implement AArch32 ATS1H* operations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 13/20] smbios: add smbios 3.0 support Peter Maydell
2015-08-25 15:00 ` Peter Maydell [this message]
2015-08-25 15:00 ` [Qemu-devel] [PULL 15/20] cputlb: Add functions for flushing TLB for a single MMU index Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 16/20] target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric order Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 17/20] target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touch Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 18/20] target-arm: Implement missing EL2 TLBI operations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 19/20] target-arm: Implement missing EL3 TLB invalidate operations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 20/20] target-arm: Implement AArch64 TLBI operations on IPAs Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440514816-16562-15-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).