From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 19/20] target-arm: Implement missing EL3 TLB invalidate operations
Date: Tue, 25 Aug 2015 16:00:15 +0100 [thread overview]
Message-ID: <1440514816-16562-20-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1440514816-16562-1-git-send-email-peter.maydell@linaro.org>
Implement the remaining stage 1 TLB invalidate operations
visible from EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-6-git-send-email-peter.maydell@linaro.org
---
target-arm/helper.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 6c38d66..00ecda9 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -2567,6 +2567,15 @@ static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri,
tlb_flush_by_mmuidx(cs, ARMMMUIdx_S1E2, -1);
}
+static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ CPUState *cs = CPU(cpu);
+
+ tlb_flush_by_mmuidx(cs, ARMMMUIdx_S1E3, -1);
+}
+
static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -2601,6 +2610,16 @@ static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
}
+static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ CPUState *other_cs;
+
+ CPU_FOREACH(other_cs) {
+ tlb_flush_by_mmuidx(other_cs, ARMMMUIdx_S1E3, -1);
+ }
+}
+
static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -2636,6 +2655,20 @@ static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri,
tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdx_S1E2, -1);
}
+static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Invalidate by VA, EL3
+ * Currently handles both VAE3 and VALE3, since we don't support
+ * flush-last-level-only.
+ */
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ CPUState *cs = CPU(cpu);
+ uint64_t pageaddr = sextract64(value << 12, 0, 56);
+
+ tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdx_S1E3, -1);
+}
+
static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -2665,6 +2698,17 @@ static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
}
}
+static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ CPUState *other_cs;
+ uint64_t pageaddr = sextract64(value << 12, 0, 56);
+
+ CPU_FOREACH(other_cs) {
+ tlb_flush_page_by_mmuidx(other_cs, pageaddr, ARMMMUIdx_S1E3, -1);
+ }
+}
+
static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri)
{
/* We don't implement EL2, so the only control on DC ZVA is the
@@ -2849,10 +2893,18 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4,
.access = PL2_W, .type = ARM_CP_NO_RAW,
.writefn = tlbi_aa64_alle1is_write },
+ { .name = "TLBI_VMALLS12E1IS", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 6,
+ .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_alle1is_write },
{ .name = "TLBI_ALLE1", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4,
.access = PL2_W, .type = ARM_CP_NO_RAW,
.writefn = tlbi_aa64_alle1_write },
+ { .name = "TLBI_VMALLS12E1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6,
+ .access = PL2_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_alle1is_write },
#ifndef CONFIG_USER_ONLY
/* 64 bit address translation operations */
{ .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
@@ -3317,6 +3369,30 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
.opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 1,
.access = PL3_RW, .type = ARM_CP_CONST,
.resetvalue = 0 },
+ { .name = "TLBI_ALLE3IS", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 0,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_alle3is_write },
+ { .name = "TLBI_VAE3IS", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 1,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_vae3is_write },
+ { .name = "TLBI_VALE3IS", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 5,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_vae3is_write },
+ { .name = "TLBI_ALLE3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 0,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_alle3_write },
+ { .name = "TLBI_VAE3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 1,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_vae3_write },
+ { .name = "TLBI_VALE3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 5,
+ .access = PL3_W, .type = ARM_CP_NO_RAW,
+ .writefn = tlbi_aa64_vae3_write },
REGINFO_SENTINEL
};
--
1.9.1
next prev parent reply other threads:[~2015-08-25 15:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-25 14:59 [Qemu-devel] [PULL 00/20] target-arm queue Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 01/20] xlnx-zynqmp: Connect the four OCM banks Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 02/20] MAINTAINERS: Update Xilinx Maintainership Peter Maydell
2015-08-25 14:59 ` [Qemu-devel] [PULL 03/20] MAINTAINERS: Add ZynqMP to MAINTAINERS file Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 04/20] target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 05/20] target-arm: Implement missing AMAIR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 06/20] target-arm: Implement missing AFSR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 07/20] target-arm: Implement missing ACTLR registers Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 08/20] target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 09/20] target-arm: Wire up AArch64 EL2 and EL3 address translation ops Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 10/20] target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3 Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 11/20] target-arm: Enable the AArch32 ATS12NSO ops Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 12/20] target-arm: Implement AArch32 ATS1H* operations Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 13/20] smbios: add smbios 3.0 support Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 14/20] smbios: implement smbios support for mach-virt Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 15/20] cputlb: Add functions for flushing TLB for a single MMU index Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 16/20] target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric order Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 17/20] target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touch Peter Maydell
2015-08-25 15:00 ` [Qemu-devel] [PULL 18/20] target-arm: Implement missing EL2 TLBI operations Peter Maydell
2015-08-25 15:00 ` Peter Maydell [this message]
2015-08-25 15:00 ` [Qemu-devel] [PULL 20/20] target-arm: Implement AArch64 TLBI operations on IPAs Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440514816-16562-20-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).