From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: marcandre.lureau@redhat.com, yhindin@redhat.com,
leonid@daynix.com, pbonzini@redhat.com
Subject: [Qemu-devel] [PATCH 1/4] configure: qemu-ga: move MSI installer probe after qga probe
Date: Thu, 27 Aug 2015 18:55:41 -0500 [thread overview]
Message-ID: <1440719744-24755-2-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1440719744-24755-1-git-send-email-mdroth@linux.vnet.ibm.com>
MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.
Fix this by moving MSI installer probe after the final qga probes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
configure | 106 ++++++++++++++++++++++++++++++++------------------------------
1 file changed, 54 insertions(+), 52 deletions(-)
diff --git a/configure b/configure
index 1f033e9..c31c652 100755
--- a/configure
+++ b/configure
@@ -3905,58 +3905,6 @@ EOF
fi
##########################################
-# Guest agent Window MSI package
-
-if test "$guest_agent" != yes; then
- if test "$guest_agent_msi" = yes; then
- error_exit "MSI guest agent package requires guest agent enabled"
- fi
- guest_agent_msi=no
-elif test "$mingw32" != "yes"; then
- if test "$guest_agent_msi" = "yes"; then
- error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
- fi
- guest_agent_msi=no
-elif ! has wixl; then
- if test "$guest_agent_msi" = "yes"; then
- error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
- fi
- guest_agent_msi=no
-fi
-
-if test "$guest_agent_msi" != "no"; then
- if test "$guest_agent_with_vss" = "yes"; then
- QEMU_GA_MSI_WITH_VSS="-D InstallVss"
- fi
-
- if test "$QEMU_GA_MANUFACTURER" = ""; then
- QEMU_GA_MANUFACTURER=QEMU
- fi
-
- if test "$QEMU_GA_DISTRO" = ""; then
- QEMU_GA_DISTRO=Linux
- fi
-
- if test "$QEMU_GA_VERSION" = ""; then
- QEMU_GA_VERSION=`cat $source_path/VERSION`
- fi
-
- QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=`$pkg_config --variable=prefix glib-2.0`/bin"
-
- case "$cpu" in
- x86_64)
- QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
- ;;
- i386)
- QEMU_GA_MSI_ARCH="-D Arch=32"
- ;;
- *)
- error_exit "CPU $cpu not supported for building installation package"
- ;;
- esac
-fi
-
-##########################################
# check if we have fdatasync
fdatasync=no
@@ -4396,6 +4344,9 @@ if test "$softmmu" = yes ; then
fi
fi
fi
+
+# Probe for guest agent support/options
+
if [ "$guest_agent" != "no" ]; then
if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
tools="qemu-ga\$(EXESUF) $tools"
@@ -4410,6 +4361,57 @@ if [ "$guest_agent" != "no" ]; then
fi
fi
+# Guest agent Window MSI package
+
+if test "$guest_agent" != yes; then
+ if test "$guest_agent_msi" = yes; then
+ error_exit "MSI guest agent package requires guest agent enabled"
+ fi
+ guest_agent_msi=no
+elif test "$mingw32" != "yes"; then
+ if test "$guest_agent_msi" = "yes"; then
+ error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
+ fi
+ guest_agent_msi=no
+elif ! has wixl; then
+ if test "$guest_agent_msi" = "yes"; then
+ error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
+ fi
+ guest_agent_msi=no
+fi
+
+if test "$guest_agent_msi" != "no"; then
+ if test "$guest_agent_with_vss" = "yes"; then
+ QEMU_GA_MSI_WITH_VSS="-D InstallVss"
+ fi
+
+ if test "$QEMU_GA_MANUFACTURER" = ""; then
+ QEMU_GA_MANUFACTURER=QEMU
+ fi
+
+ if test "$QEMU_GA_DISTRO" = ""; then
+ QEMU_GA_DISTRO=Linux
+ fi
+
+ if test "$QEMU_GA_VERSION" = ""; then
+ QEMU_GA_VERSION=`cat $source_path/VERSION`
+ fi
+
+ QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=`$pkg_config --variable=prefix glib-2.0`/bin"
+
+ case "$cpu" in
+ x86_64)
+ QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
+ ;;
+ i386)
+ QEMU_GA_MSI_ARCH="-D Arch=32"
+ ;;
+ *)
+ error_exit "CPU $cpu not supported for building installation package"
+ ;;
+ esac
+fi
+
# Mac OS X ships with a broken assembler
roms=
if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \
--
1.9.1
next prev parent reply other threads:[~2015-08-27 23:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 23:55 [Qemu-devel] [PATCH v2 0/4] qemu-ga: various w32 build fix-ups for MSI/VSS support Michael Roth
2015-08-27 23:55 ` Michael Roth [this message]
2015-08-27 23:55 ` [Qemu-devel] [PATCH 2/4] configure: qemu-ga: explicitly enable qemu-ga MSI support when probed Michael Roth
2015-08-27 23:55 ` [Qemu-devel] [PATCH 3/4] build: qemu-ga: fix VSS dependencies Michael Roth
2015-09-07 10:48 ` Paolo Bonzini
2015-09-07 19:55 ` Michael Roth
2015-09-07 20:37 ` Michael Roth
2015-09-07 20:39 ` Paolo Bonzini
2015-09-07 20:51 ` Michael Roth
2015-08-27 23:55 ` [Qemu-devel] [PATCH 4/4] Makefile: qemu-ga: fix msi target error message Michael Roth
-- strict thread matches above, loose matches on Subject: below --
2015-08-26 22:21 [Qemu-devel] [0/4] qemu-ga: various w32 build fix-ups for MSI/VSS support Michael Roth
2015-08-26 22:21 ` [Qemu-devel] [PATCH 1/4] configure: qemu-ga: move MSI installer probe after qga probe Michael Roth
2015-08-27 12:31 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440719744-24755-2-git-send-email-mdroth@linux.vnet.ibm.com \
--to=mdroth@linux.vnet.ibm.com \
--cc=leonid@daynix.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yhindin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).