qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 03/20] hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers
Date: Tue,  8 Sep 2015 17:51:15 +0100	[thread overview]
Message-ID: <1441731092-6513-4-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1441731092-6513-1-git-send-email-peter.maydell@linaro.org>

A GICv2 has both GICC_APR<n> and GICC_NSAPR<n> registers, with
the latter holding the active priority bits for Group 1 interrupts
(usually Nonsecure interrupts), and the Nonsecure view of the
GICC_APR<n> is the second half of the GICC_NSAPR<n> registers.
Turn our half-hearted implementation of APR<n> into a proper
implementation of both APR<n> and NSAPR<n>:

 * Add the underlying state for NSAPR<n>
 * Make sure APR<n> aren't visible for pre-GICv2
 * Implement reading of NSAPR<n>
 * Make non-secure reads of APR<n> behave correctly
 * Implement writing to APR<n> and NSAPR<n>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1438089748-5528-4-git-send-email-peter.maydell@linaro.org
---
 hw/intc/arm_gic.c                | 114 ++++++++++++++++++++++++++++++++++++++-
 hw/intc/arm_gic_common.c         |   5 +-
 include/hw/intc/arm_gic_common.h |   1 +
 3 files changed, 116 insertions(+), 4 deletions(-)

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 1b8e839..34f781f 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -948,6 +948,68 @@ static MemTxResult gic_dist_write(void *opaque, hwaddr offset, uint64_t data,
     }
 }
 
+static inline uint32_t gic_apr_ns_view(GICState *s, int cpu, int regno)
+{
+    /* Return the Nonsecure view of GICC_APR<regno>. This is the
+     * second half of GICC_NSAPR.
+     */
+    switch (GIC_MIN_BPR) {
+    case 0:
+        if (regno < 2) {
+            return s->nsapr[regno + 2][cpu];
+        }
+        break;
+    case 1:
+        if (regno == 0) {
+            return s->nsapr[regno + 1][cpu];
+        }
+        break;
+    case 2:
+        if (regno == 0) {
+            return extract32(s->nsapr[0][cpu], 16, 16);
+        }
+        break;
+    case 3:
+        if (regno == 0) {
+            return extract32(s->nsapr[0][cpu], 8, 8);
+        }
+        break;
+    default:
+        g_assert_not_reached();
+    }
+    return 0;
+}
+
+static inline void gic_apr_write_ns_view(GICState *s, int cpu, int regno,
+                                         uint32_t value)
+{
+    /* Write the Nonsecure view of GICC_APR<regno>. */
+    switch (GIC_MIN_BPR) {
+    case 0:
+        if (regno < 2) {
+            s->nsapr[regno + 2][cpu] = value;
+        }
+        break;
+    case 1:
+        if (regno == 0) {
+            s->nsapr[regno + 1][cpu] = value;
+        }
+        break;
+    case 2:
+        if (regno == 0) {
+            s->nsapr[0][cpu] = deposit32(s->nsapr[0][cpu], 16, 16, value);
+        }
+        break;
+    case 3:
+        if (regno == 0) {
+            s->nsapr[0][cpu] = deposit32(s->nsapr[0][cpu], 8, 8, value);
+        }
+        break;
+    default:
+        g_assert_not_reached();
+    }
+}
+
 static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
                                 uint64_t *data, MemTxAttrs attrs)
 {
@@ -988,8 +1050,31 @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
         }
         break;
     case 0xd0: case 0xd4: case 0xd8: case 0xdc:
-        *data = s->apr[(offset - 0xd0) / 4][cpu];
+    {
+        int regno = (offset - 0xd0) / 4;
+
+        if (regno >= GIC_NR_APRS || s->revision != 2) {
+            *data = 0;
+        } else if (s->security_extn && !attrs.secure) {
+            /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */
+            *data = gic_apr_ns_view(s, regno, cpu);
+        } else {
+            *data = s->apr[regno][cpu];
+        }
+        break;
+    }
+    case 0xe0: case 0xe4: case 0xe8: case 0xec:
+    {
+        int regno = (offset - 0xe0) / 4;
+
+        if (regno >= GIC_NR_APRS || s->revision != 2 || !gic_has_groups(s) ||
+            (s->security_extn && !attrs.secure)) {
+            *data = 0;
+        } else {
+            *data = s->nsapr[regno][cpu];
+        }
         break;
+    }
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_read: Bad offset %x\n", (int)offset);
@@ -1027,8 +1112,33 @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
         }
         break;
     case 0xd0: case 0xd4: case 0xd8: case 0xdc:
-        qemu_log_mask(LOG_UNIMP, "Writing APR not implemented\n");
+    {
+        int regno = (offset - 0xd0) / 4;
+
+        if (regno >= GIC_NR_APRS || s->revision != 2) {
+            return MEMTX_OK;
+        }
+        if (s->security_extn && !attrs.secure) {
+            /* NS view of GICC_APR<n> is the top half of GIC_NSAPR<n> */
+            gic_apr_write_ns_view(s, regno, cpu, value);
+        } else {
+            s->apr[regno][cpu] = value;
+        }
         break;
+    }
+    case 0xe0: case 0xe4: case 0xe8: case 0xec:
+    {
+        int regno = (offset - 0xe0) / 4;
+
+        if (regno >= GIC_NR_APRS || s->revision != 2) {
+            return MEMTX_OK;
+        }
+        if (!gic_has_groups(s) || (s->security_extn && !attrs.secure)) {
+            return MEMTX_OK;
+        }
+        s->nsapr[regno][cpu] = value;
+        break;
+    }
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "gic_cpu_write: Bad offset %x\n", (int)offset);
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index fe64b51..43c103e 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -59,8 +59,8 @@ static const VMStateDescription vmstate_gic_irq_state = {
 
 static const VMStateDescription vmstate_gic = {
     .name = "arm_gic",
-    .version_id = 10,
-    .minimum_version_id = 10,
+    .version_id = 11,
+    .minimum_version_id = 11,
     .pre_save = gic_pre_save,
     .post_load = gic_post_load,
     .fields = (VMStateField[]) {
@@ -80,6 +80,7 @@ static const VMStateDescription vmstate_gic = {
         VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU),
         VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU),
+        VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU),
         VMSTATE_END_OF_LIST()
     }
 };
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index edca3e0..c4ec2c3 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -106,6 +106,7 @@ typedef struct GICState {
      * the GIC.
      */
     uint32_t apr[GIC_NR_APRS][GIC_NCPU];
+    uint32_t nsapr[GIC_NR_APRS][GIC_NCPU];
 
     uint32_t num_cpu;
 
-- 
1.9.1

  parent reply	other threads:[~2015-09-08 16:51 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-08 16:51 [Qemu-devel] [PULL 00/20] target-arm queue Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 01/20] armv7m_nvic: Implement ICSR without using internal GIC state Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 02/20] hw/intc/arm_gic: Running priority is group priority, not full priority Peter Maydell
2015-09-08 16:51 ` Peter Maydell [this message]
2015-09-08 16:51 ` [Qemu-devel] [PULL 04/20] hw/intc/arm_gic: Drop running_irq and last_active arrays Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 05/20] hw/intc/arm_gic: Actually set the active bits for active interrupts Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 06/20] qom: Add recursive version of object_child_for_each Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 07/20] hw/arm: new interface for devices which need to behave differently for kernel boot Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 08/20] hw/intc/arm_gic_common: Configure IRQs as NS if doing direct NS " Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 09/20] hw/cpu/{a15mpcore, a9mpcore}: enable TrustZone in GIC if it is enabled in CPUs Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 10/20] hw/arm/virt: Default to not providing TrustZone support Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 11/20] hw/arm/virt: Enable TZ extensions on the GIC if we are using them Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 12/20] target-arm: Fix default_exception_el() function for the case when EL3 is not supported Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 13/20] target-arm: Log the target EL when taking exceptions Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 14/20] target-arm: Correct opc1 for AT_S12Exx Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 15/20] target-arm: Add AArch64 access to PAR_EL1 Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 16/20] cadence_gem: Correct Marvell PHY SPCFC reset value Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 17/20] ahci: Separate the AHCI state structure into the header Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 18/20] ahci.c: Don't assume AHCIState's parent is AHCIPCIState Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 19/20] xlnx-zynqmp.c: Convert some of the error_propagate() calls to error_abort Peter Maydell
2015-09-08 16:51 ` [Qemu-devel] [PULL 20/20] xlnx-zynqmp: Connect the sysbus AHCI to ZynqMP Peter Maydell
2015-09-08 19:08 ` [Qemu-devel] [PULL 00/20] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441731092-6513-4-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).