* [Qemu-devel] [PATCH 0/2] update-linux-headers changes
@ 2015-09-09 13:25 Paolo Bonzini
2015-09-09 13:25 ` [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2 Paolo Bonzini
2015-09-09 13:25 ` [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers Paolo Bonzini
0 siblings, 2 replies; 6+ messages in thread
From: Paolo Bonzini @ 2015-09-09 13:25 UTC (permalink / raw)
To: qemu-devel; +Cc: den
Patch 1 updates the Linux headers, which required an unexpected change
to hw/pci/pcie_aer.c.
Patch 2 modifies the update-linux-headers script so that asm-x86/hyperv.h
can be moved to standard-headers. This is required by the Hyper-V crash
MSR patches, which use a Hyper-V define in cpu.h.
Paolo Bonzini (2):
update Linux headers to 4.2
target-i386: move asm-x86/hyperv.h to standard-headers
hw/pci/pcie_aer.c | 4 +-
.../standard-headers}/asm-x86/hyperv.h | 12 +-
include/standard-headers/linux/pci_regs.h | 381 +++++++++++++++------
include/standard-headers/linux/virtio_ring.h | 3 +-
linux-headers/asm-x86/hyperv.h | 251 +-------------
linux-headers/asm-x86/kvm.h | 4 +-
linux-headers/linux/kvm.h | 1 -
scripts/update-linux-headers.sh | 78 +++--
target-i386/kvm.c | 2 +-
9 files changed, 342 insertions(+), 394 deletions(-)
copy {linux-headers => include/standard-headers}/asm-x86/hyperv.h (97%)
--
2.4.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2
2015-09-09 13:25 [Qemu-devel] [PATCH 0/2] update-linux-headers changes Paolo Bonzini
@ 2015-09-09 13:25 ` Paolo Bonzini
2015-09-09 14:23 ` Cornelia Huck
2015-09-09 13:25 ` [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers Paolo Bonzini
1 sibling, 1 reply; 6+ messages in thread
From: Paolo Bonzini @ 2015-09-09 13:25 UTC (permalink / raw)
To: qemu-devel; +Cc: den
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/pci/pcie_aer.c | 4 +-
include/standard-headers/linux/pci_regs.h | 381 ++++++++++++++++++++-------
include/standard-headers/linux/virtio_ring.h | 3 +-
| 2 +
| 4 +-
| 1 -
| 1 +
7 files changed, 294 insertions(+), 102 deletions(-)
diff --git a/hw/pci/pcie_aer.c b/hw/pci/pcie_aer.c
index f1847ac..8e4bd56 100644
--- a/hw/pci/pcie_aer.c
+++ b/hw/pci/pcie_aer.c
@@ -827,8 +827,8 @@ typedef struct PCIEAERErrorName {
*/
static const struct PCIEAERErrorName pcie_aer_error_list[] = {
{
- .name = "TRAIN",
- .val = PCI_ERR_UNC_TRAIN,
+ .name = "UND",
+ .val = PCI_ERR_UNC_UND,
.correctable = false,
}, {
.name = "DLP",
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index 57e8c80..413417f 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -13,10 +13,10 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*
- * For hypertransport information, please consult the following manuals
- * from http://www.hypertransport.org
+ * For HyperTransport information, please consult the following manuals
+ * from http://www.hypertransport.org
*
- * The Hypertransport I/O Link Specification
+ * The HyperTransport I/O Link Specification
*/
#ifndef LINUX_PCI_REGS_H
@@ -26,6 +26,7 @@
* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
+#define PCI_STD_HEADER_SIZEOF 64
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
@@ -36,7 +37,7 @@
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
@@ -44,7 +45,7 @@
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
@@ -125,7 +126,8 @@
#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */
#define PCI_IO_RANGE_TYPE_16 0x00
#define PCI_IO_RANGE_TYPE_32 0x01
-#define PCI_IO_RANGE_MASK (~0x0fUL)
+#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */
+#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */
#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
#define PCI_MEMORY_LIMIT 0x22
@@ -203,16 +205,18 @@
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */
#define PCI_CAP_ID_DBG 0x0A /* Debug port */
#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
-#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
-#define PCI_CAP_ID_SATA 0x12 /* Serial ATA */
+#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_ID_MAX PCI_CAP_ID_AF
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
@@ -264,8 +268,8 @@
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
@@ -277,6 +281,7 @@
#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
+#define PCI_CAP_VPD_SIZEOF 8
/* Slot Identification */
@@ -287,32 +292,37 @@
/* Message Signalled Interrupts registers */
-#define PCI_MSI_FLAGS 2 /* Various flags */
-#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
-#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
-#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
-#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
-#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */
+#define PCI_MSI_FLAGS 2 /* Message Control */
+#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */
+#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */
+#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */
+#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */
+#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */
#define PCI_MSI_RFU 3 /* Rest of capability flags */
#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
-#define PCI_MSI_PENDING_32 16 /* Pending bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
-#define PCI_MSI_PENDING_64 20 /* Pending bits register for 32-bit devices */
+#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
/* MSI-X registers */
-#define PCI_MSIX_FLAGS 2
-#define PCI_MSIX_FLAGS_QSIZE 0x7FF
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
-#define PCI_MSIX_TABLE 4
-#define PCI_MSIX_PBA 8
-#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-
-/* MSI-X entry's format */
+#define PCI_MSIX_FLAGS 2 /* Message Control */
+#define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */
+#define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */
+#define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X enable */
+#define PCI_MSIX_TABLE 4 /* Table offset */
+#define PCI_MSIX_TABLE_BIR 0x00000007 /* BAR index */
+#define PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_PBA 8 /* Pending Bit Array offset */
+#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */
+#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */
+#define PCI_MSIX_FLAGS_BIRMASK PCI_MSIX_PBA_BIR /* deprecated */
+#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
+
+/* MSI-X Table entry format */
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR 0
#define PCI_MSIX_ENTRY_UPPER_ADDR 4
@@ -341,8 +351,9 @@
#define PCI_AF_CTRL_FLR 0x01
#define PCI_AF_STATUS 5
#define PCI_AF_STATUS_TP 0x01
+#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */
-/* PCI-X registers */
+/* PCI-X registers (Type 0 (non-bridge) devices) */
#define PCI_X_CMD 2 /* Modes & Features */
#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
@@ -362,7 +373,7 @@
#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
-#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
#define PCI_X_STATUS 4 /* PCI-X capabilities */
#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
@@ -377,11 +388,28 @@
#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
+#define PCI_X_ECC_CSR 8 /* ECC control and status */
+#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */
+#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */
+#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */
+
+/* PCI-X registers (Type 1 (bridge) devices) */
+
+#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */
+#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */
+#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */
+#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */
+#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */
+#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */
+#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */
+#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */
+#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */
+#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */
/* PCI Bridge Subsystem ID registers */
-#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */
/* PCI Express capability registers */
@@ -393,24 +421,24 @@
#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
-#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
-#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
+#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
-#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
+#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
-#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
-#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
-#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
-#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
-#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
-#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
-#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
-#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
-#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
-#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
-#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */
+#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */
+#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */
+#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */
+#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */
+#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */
+#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */
+#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */
+#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */
+#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */
+#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */
#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
#define PCI_EXP_DEVCTL 8 /* Device Control */
#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
@@ -424,47 +452,61 @@
#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
+#define PCI_EXP_DEVCTL_READRQ_128B 0x0000 /* 128 Bytes */
+#define PCI_EXP_DEVCTL_READRQ_256B 0x1000 /* 256 Bytes */
+#define PCI_EXP_DEVCTL_READRQ_512B 0x2000 /* 512 Bytes */
+#define PCI_EXP_DEVCTL_READRQ_1024B 0x3000 /* 1024 Bytes */
#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
#define PCI_EXP_DEVSTA 10 /* Device Status */
-#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
-#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
-#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
-#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
-#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
-#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
+#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */
+#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */
+#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */
+#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */
+#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */
+#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */
#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
+#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
+#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
-#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
+#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */
#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
#define PCI_EXP_LNKCTL 16 /* Link Control */
#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
+#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
+#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
-#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
+#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
-#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
#define PCI_EXP_LNKSTA 18 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
-#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
-#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
+#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
+#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */
+#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */
+#define PCI_EXP_LNKSTA_NLW_X4 0x0040 /* Current Link Width x4 */
+#define PCI_EXP_LNKSTA_NLW_X8 0x0080 /* Current Link Width x8 */
#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */
#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
@@ -486,8 +528,16 @@
#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
+#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */
+#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
+#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */
#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
+#define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator on */
+#define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator blinking */
+#define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator off */
#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */
+#define PCI_EXP_SLTCTL_PWR_ON 0x0000 /* Power On */
+#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
#define PCI_EXP_SLTSTA 26 /* Slot Status */
@@ -501,52 +551,94 @@
#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
#define PCI_EXP_RTCTL 28 /* Root Control */
-#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
-#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
-#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
-#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
-#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */
+#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */
+#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */
+#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */
+#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
#define PCI_EXP_RTCAP 30 /* Root Capabilities */
+#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */
#define PCI_EXP_RTSTA 32 /* Root Status */
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */
+/*
+ * The Device Capabilities 2, Device Status 2, Device Control 2,
+ * Link Capabilities 2, Link Status 2, Link Control 2,
+ * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers
+ * are only present on devices with PCIe Capability version 2.
+ * Use pcie_capability_read_word() and similar interfaces to use them
+ * safely.
+ */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
-#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
-#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
-#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */
+#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
+#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
+#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
-#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
-#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
-#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
-#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
-#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
+#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
+#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
+#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */
+#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */
+#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */
+#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */
+#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */
+#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */
+#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */
+#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */
+#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
+#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
+#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
-#define PCI_EXT_CAP_ID_ERR 1
-#define PCI_EXT_CAP_ID_VC 2
-#define PCI_EXT_CAP_ID_DSN 3
-#define PCI_EXT_CAP_ID_PWR 4
-#define PCI_EXT_CAP_ID_VNDR 11
-#define PCI_EXT_CAP_ID_ACS 13
-#define PCI_EXT_CAP_ID_ARI 14
-#define PCI_EXT_CAP_ID_ATS 15
-#define PCI_EXT_CAP_ID_SRIOV 16
-#define PCI_EXT_CAP_ID_LTR 24
+#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */
+#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
+#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */
+#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */
+#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */
+#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */
+#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
+#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
+
+#define PCI_EXT_CAP_DSN_SIZEOF 12
+#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
/* Advanced Error Reporting */
#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
-#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
+#define PCI_ERR_UNC_UND 0x00000001 /* Undefined */
#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
+#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
@@ -556,6 +648,11 @@
#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
+#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */
+#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */
+#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
+#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
+#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
/* Same bits as above */
#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
@@ -566,6 +663,9 @@
#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
+#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
+#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
+#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
/* Same bits as above */
#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
@@ -586,9 +686,9 @@
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
/* Multi ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
+/* ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
+/* Multi ERR_FATAL/NONFATAL Received */
#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
@@ -596,13 +696,36 @@
#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
/* Virtual Channel */
-#define PCI_VC_PORT_REG1 4
-#define PCI_VC_PORT_REG2 8
+#define PCI_VC_PORT_CAP1 4
+#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */
+#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */
+#define PCI_VC_CAP1_ARB_SIZE 0x00000c00
+#define PCI_VC_PORT_CAP2 8
+#define PCI_VC_CAP2_32_PHASE 0x00000002
+#define PCI_VC_CAP2_64_PHASE 0x00000004
+#define PCI_VC_CAP2_128_PHASE 0x00000008
+#define PCI_VC_CAP2_ARB_OFF 0xff000000
#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001
#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_PORT_STATUS_TABLE 0x00000001
#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CAP_32_PHASE 0x00000002
+#define PCI_VC_RES_CAP_64_PHASE 0x00000004
+#define PCI_VC_RES_CAP_128_PHASE 0x00000008
+#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010
+#define PCI_VC_RES_CAP_256_PHASE 0x00000020
+#define PCI_VC_RES_CAP_ARB_OFF 0xff000000
#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000
+#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000
+#define PCI_VC_RES_CTRL_ID 0x07000000
+#define PCI_VC_RES_CTRL_ENABLE 0x80000000
#define PCI_VC_RES_STATUS 26
+#define PCI_VC_RES_STATUS_TABLE 0x00000001
+#define PCI_VC_RES_STATUS_NEGO 0x00000002
+#define PCI_CAP_VC_BASE_SIZEOF 0x10
+#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
/* Power Budgeting */
#define PCI_PWR_DSR 4 /* Data Select Register */
@@ -615,9 +738,16 @@
#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
#define PCI_PWR_CAP 12 /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
+#define PCI_EXT_CAP_PWR_SIZEOF 16
+
+/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
+#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */
+#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff)
+#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf)
+#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
/*
- * Hypertransport sub capability types
+ * HyperTransport sub capability types
*
* Unfortunately there are both 3 bit and 5 bit capability types defined
* in the HT spec, catering for that is a little messy. You probably don't
@@ -645,8 +775,10 @@
#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
-#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */
+#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
+#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
/* Alternative Routing-ID Interpretation */
#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
@@ -657,6 +789,7 @@
#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
+#define PCI_EXT_CAP_ARI_SIZEOF 8
/* Address Translation Service */
#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
@@ -666,6 +799,29 @@
#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+#define PCI_EXT_CAP_ATS_SIZEOF 8
+
+/* Page Request Interface */
+#define PCI_PRI_CTRL 0x04 /* PRI control register */
+#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */
+#define PCI_PRI_CTRL_RESET 0x02 /* Reset */
+#define PCI_PRI_STATUS 0x06 /* PRI status register */
+#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */
+#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */
+#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */
+#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */
+#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
+#define PCI_EXT_CAP_PRI_SIZEOF 16
+
+/* Process Address Space ID */
+#define PCI_PASID_CAP 0x04 /* PASID feature register */
+#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */
+#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */
+#define PCI_PASID_CTRL 0x06 /* PASID control register */
+#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
+#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
+#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */
+#define PCI_EXT_CAP_PASID_SIZEOF 8
/* Single Root I/O Virtualization */
#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
@@ -697,12 +853,14 @@
#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+#define PCI_EXT_CAP_SRIOV_SIZEOF 64
#define PCI_LTR_MAX_SNOOP_LAT 0x4
#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
#define PCI_LTR_VALUE_MASK 0x000003ff
#define PCI_LTR_SCALE_MASK 0x00001c00
#define PCI_LTR_SCALE_SHIFT 10
+#define PCI_EXT_CAP_LTR_SIZEOF 8
/* Access Control Service */
#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
@@ -713,7 +871,38 @@
#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
#define PCI_ACS_EC 0x20 /* P2P Egress Control */
#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */
#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */
+#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
+
+/* SATA capability */
+#define PCI_SATA_REGS 4 /* SATA REGs specifier */
+#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
+#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
+#define PCI_SATA_SIZEOF_SHORT 8
+#define PCI_SATA_SIZEOF_LONG 16
+
+/* Resizable BARs */
+#define PCI_REBAR_CTRL 8 /* control register */
+#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
+#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
+
+/* Dynamic Power Allocation */
+#define PCI_DPA_CAP 4 /* capability register */
+#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
+#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */
+
+/* TPH Requester */
+#define PCI_TPH_CAP 4 /* capability register */
+#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */
+#define PCI_TPH_LOC_NONE 0x000 /* no location */
+#define PCI_TPH_LOC_CAP 0x200 /* in capability */
+#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
+#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
+#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
+#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+
#endif /* LINUX_PCI_REGS_H */
diff --git a/include/standard-headers/linux/virtio_ring.h b/include/standard-headers/linux/virtio_ring.h
index 6fe276f..023c6db 100644
--- a/include/standard-headers/linux/virtio_ring.h
+++ b/include/standard-headers/linux/virtio_ring.h
@@ -31,6 +31,7 @@
* SUCH DAMAGE.
*
* Copyright Rusty Russell IBM Corporation 2007. */
+#include <stdint.h>
#include "standard-headers/linux/types.h"
#include "standard-headers/linux/virtio_types.h"
@@ -143,7 +144,7 @@ static inline void vring_init(struct vring *vr, unsigned int num, void *p,
vr->num = num;
vr->desc = p;
vr->avail = p + num*sizeof(struct vring_desc);
- vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__virtio16)
+ vr->used = (void *)(((uintptr_t)&vr->avail->ring[num] + sizeof(__virtio16)
+ align-1) & ~(align - 1));
}
--git a/linux-headers/asm-x86/hyperv.h b/linux-headers/asm-x86/hyperv.h
index 8fba544..f36d56b 100644
--- a/linux-headers/asm-x86/hyperv.h
+++ b/linux-headers/asm-x86/hyperv.h
@@ -108,6 +108,8 @@
#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE (1 << 4)
/* Support for a virtual guest idle state is available */
#define HV_X64_GUEST_IDLE_STATE_AVAILABLE (1 << 5)
+/* Guest crash data handler available */
+#define HV_X64_GUEST_CRASH_MSR_AVAILABLE (1 << 10)
/*
* Implementation recommendations. Indicates which behaviors the hypervisor
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index a4ae82e..cd54147 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -354,7 +354,7 @@ struct kvm_xcrs {
struct kvm_sync_regs {
};
-#define KVM_QUIRK_LINT0_REENABLED (1 << 0)
-#define KVM_QUIRK_CD_NW_CLEARED (1 << 1)
+#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1)
#endif /* _ASM_X86_KVM_H */
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index b974c85..3bac873 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -317,7 +317,6 @@ struct kvm_run {
struct {
#define KVM_SYSTEM_EVENT_SHUTDOWN 1
#define KVM_SYSTEM_EVENT_RESET 2
-#define KVM_SYSTEM_EVENT_CRASH 3
__u32 type;
__u64 flags;
} system_event;
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
index f0e830c..7f7b592 100755
--- a/scripts/update-linux-headers.sh
+++ b/scripts/update-linux-headers.sh
@@ -39,6 +39,7 @@ cp_virtio() {
if
grep '#include' "$f" | grep -v -e 'linux/virtio' \
-e 'linux/types' \
+ -e 'stdint' \
-e 'linux/if_ether' \
-e 'sys/' \
> /dev/null
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers
2015-09-09 13:25 [Qemu-devel] [PATCH 0/2] update-linux-headers changes Paolo Bonzini
2015-09-09 13:25 ` [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2 Paolo Bonzini
@ 2015-09-09 13:25 ` Paolo Bonzini
2015-09-09 14:48 ` Cornelia Huck
1 sibling, 1 reply; 6+ messages in thread
From: Paolo Bonzini @ 2015-09-09 13:25 UTC (permalink / raw)
To: qemu-devel; +Cc: den
The Hyper-V definitions are an industry standard and can be used
from code that is not KVM-specific.
The changes to scripts/update-linux-headers.sh are required because there
is both an asm-x86/hyperv.h and a linux/hyperv.h file. linux/hyperv.h
introduces dependencies on additional Linux uapi headers, so we only
want the former.
The solution is to make cp_virtio (now renamed to cp_portable) copy
one file only, instead of using the "find" command, and call it multiple
times. The new function is really just a reindentation of the old one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
.../standard-headers}/asm-x86/hyperv.h | 10 +-
| 253 +--------------------
| 79 ++++---
target-i386/kvm.c | 2 +-
4 files changed, 49 insertions(+), 295 deletions(-)
copy {linux-headers => include/standard-headers}/asm-x86/hyperv.h (98%)
diff --git a/linux-headers/asm-x86/hyperv.h b/include/standard-headers/asm-x86/hyperv.h
similarity index 98%
copy from linux-headers/asm-x86/hyperv.h
copy to include/standard-headers/asm-x86/hyperv.h
index f36d56b..a2123ca 100644
--- a/linux-headers/asm-x86/hyperv.h
+++ b/include/standard-headers/asm-x86/hyperv.h
@@ -1,7 +1,7 @@
#ifndef _ASM_X86_HYPERV_H
#define _ASM_X86_HYPERV_H
-#include <linux/types.h>
+#include "standard-headers/linux/types.h"
/*
* The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
@@ -243,10 +243,10 @@
#define HV_STATUS_INSUFFICIENT_BUFFERS 19
typedef struct _HV_REFERENCE_TSC_PAGE {
- __u32 tsc_sequence;
- __u32 res1;
- __u64 tsc_scale;
- __s64 tsc_offset;
+ uint32_t tsc_sequence;
+ uint32_t res1;
+ uint64_t tsc_scale;
+ int64_t tsc_offset;
} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
#endif
--git a/linux-headers/asm-x86/hyperv.h b/linux-headers/asm-x86/hyperv.h
index f36d56b..01af4d8 100644
--- a/linux-headers/asm-x86/hyperv.h
+++ b/linux-headers/asm-x86/hyperv.h
@@ -1,252 +1 @@
-#ifndef _ASM_X86_HYPERV_H
-#define _ASM_X86_HYPERV_H
-
-#include <linux/types.h>
-
-/*
- * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
- * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
- */
-#define HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS 0x40000000
-#define HYPERV_CPUID_INTERFACE 0x40000001
-#define HYPERV_CPUID_VERSION 0x40000002
-#define HYPERV_CPUID_FEATURES 0x40000003
-#define HYPERV_CPUID_ENLIGHTMENT_INFO 0x40000004
-#define HYPERV_CPUID_IMPLEMENT_LIMITS 0x40000005
-
-#define HYPERV_HYPERVISOR_PRESENT_BIT 0x80000000
-#define HYPERV_CPUID_MIN 0x40000005
-#define HYPERV_CPUID_MAX 0x4000ffff
-
-/*
- * Feature identification. EAX indicates which features are available
- * to the partition based upon the current partition privileges.
- */
-
-/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
-#define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0)
-/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
-#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
-
-/* A partition's reference time stamp counter (TSC) page */
-#define HV_X64_MSR_REFERENCE_TSC 0x40000021
-
-/*
- * There is a single feature flag that signifies the presence of the MSR
- * that can be used to retrieve both the local APIC Timer frequency as
- * well as the TSC frequency.
- */
-
-/* Local APIC timer frequency MSR (HV_X64_MSR_APIC_FREQUENCY) is available */
-#define HV_X64_MSR_APIC_FREQUENCY_AVAILABLE (1 << 11)
-
-/* TSC frequency MSR (HV_X64_MSR_TSC_FREQUENCY) is available */
-#define HV_X64_MSR_TSC_FREQUENCY_AVAILABLE (1 << 11)
-
-/*
- * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
- * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
- */
-#define HV_X64_MSR_SYNIC_AVAILABLE (1 << 2)
-/*
- * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
- * HV_X64_MSR_STIMER3_COUNT) available
- */
-#define HV_X64_MSR_SYNTIMER_AVAILABLE (1 << 3)
-/*
- * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
- * are available
- */
-#define HV_X64_MSR_APIC_ACCESS_AVAILABLE (1 << 4)
-/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
-#define HV_X64_MSR_HYPERCALL_AVAILABLE (1 << 5)
-/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
-#define HV_X64_MSR_VP_INDEX_AVAILABLE (1 << 6)
-/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
-#define HV_X64_MSR_RESET_AVAILABLE (1 << 7)
- /*
- * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
- * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
- * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
- */
-#define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8)
-
-/*
- * Feature identification: EBX indicates which flags were specified at
- * partition creation. The format is the same as the partition creation
- * flag structure defined in section Partition Creation Flags.
- */
-#define HV_X64_CREATE_PARTITIONS (1 << 0)
-#define HV_X64_ACCESS_PARTITION_ID (1 << 1)
-#define HV_X64_ACCESS_MEMORY_POOL (1 << 2)
-#define HV_X64_ADJUST_MESSAGE_BUFFERS (1 << 3)
-#define HV_X64_POST_MESSAGES (1 << 4)
-#define HV_X64_SIGNAL_EVENTS (1 << 5)
-#define HV_X64_CREATE_PORT (1 << 6)
-#define HV_X64_CONNECT_PORT (1 << 7)
-#define HV_X64_ACCESS_STATS (1 << 8)
-#define HV_X64_DEBUGGING (1 << 11)
-#define HV_X64_CPU_POWER_MANAGEMENT (1 << 12)
-#define HV_X64_CONFIGURE_PROFILER (1 << 13)
-
-/*
- * Feature identification. EDX indicates which miscellaneous features
- * are available to the partition.
- */
-/* The MWAIT instruction is available (per section MONITOR / MWAIT) */
-#define HV_X64_MWAIT_AVAILABLE (1 << 0)
-/* Guest debugging support is available */
-#define HV_X64_GUEST_DEBUGGING_AVAILABLE (1 << 1)
-/* Performance Monitor support is available*/
-#define HV_X64_PERF_MONITOR_AVAILABLE (1 << 2)
-/* Support for physical CPU dynamic partitioning events is available*/
-#define HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE (1 << 3)
-/*
- * Support for passing hypercall input parameter block via XMM
- * registers is available
- */
-#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE (1 << 4)
-/* Support for a virtual guest idle state is available */
-#define HV_X64_GUEST_IDLE_STATE_AVAILABLE (1 << 5)
-/* Guest crash data handler available */
-#define HV_X64_GUEST_CRASH_MSR_AVAILABLE (1 << 10)
-
-/*
- * Implementation recommendations. Indicates which behaviors the hypervisor
- * recommends the OS implement for optimal performance.
- */
- /*
- * Recommend using hypercall for address space switches rather
- * than MOV to CR3 instruction
- */
-#define HV_X64_MWAIT_RECOMMENDED (1 << 0)
-/* Recommend using hypercall for local TLB flushes rather
- * than INVLPG or MOV to CR3 instructions */
-#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1)
-/*
- * Recommend using hypercall for remote TLB flushes rather
- * than inter-processor interrupts
- */
-#define HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED (1 << 2)
-/*
- * Recommend using MSRs for accessing APIC registers
- * EOI, ICR and TPR rather than their memory-mapped counterparts
- */
-#define HV_X64_APIC_ACCESS_RECOMMENDED (1 << 3)
-/* Recommend using the hypervisor-provided MSR to initiate a system RESET */
-#define HV_X64_SYSTEM_RESET_RECOMMENDED (1 << 4)
-/*
- * Recommend using relaxed timing for this partition. If used,
- * the VM should disable any watchdog timeouts that rely on the
- * timely delivery of external interrupts
- */
-#define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5)
-
-/* MSR used to identify the guest OS. */
-#define HV_X64_MSR_GUEST_OS_ID 0x40000000
-
-/* MSR used to setup pages used to communicate with the hypervisor. */
-#define HV_X64_MSR_HYPERCALL 0x40000001
-
-/* MSR used to provide vcpu index */
-#define HV_X64_MSR_VP_INDEX 0x40000002
-
-/* MSR used to read the per-partition time reference counter */
-#define HV_X64_MSR_TIME_REF_COUNT 0x40000020
-
-/* MSR used to retrieve the TSC frequency */
-#define HV_X64_MSR_TSC_FREQUENCY 0x40000022
-
-/* MSR used to retrieve the local APIC timer frequency */
-#define HV_X64_MSR_APIC_FREQUENCY 0x40000023
-
-/* Define the virtual APIC registers */
-#define HV_X64_MSR_EOI 0x40000070
-#define HV_X64_MSR_ICR 0x40000071
-#define HV_X64_MSR_TPR 0x40000072
-#define HV_X64_MSR_APIC_ASSIST_PAGE 0x40000073
-
-/* Define synthetic interrupt controller model specific registers. */
-#define HV_X64_MSR_SCONTROL 0x40000080
-#define HV_X64_MSR_SVERSION 0x40000081
-#define HV_X64_MSR_SIEFP 0x40000082
-#define HV_X64_MSR_SIMP 0x40000083
-#define HV_X64_MSR_EOM 0x40000084
-#define HV_X64_MSR_SINT0 0x40000090
-#define HV_X64_MSR_SINT1 0x40000091
-#define HV_X64_MSR_SINT2 0x40000092
-#define HV_X64_MSR_SINT3 0x40000093
-#define HV_X64_MSR_SINT4 0x40000094
-#define HV_X64_MSR_SINT5 0x40000095
-#define HV_X64_MSR_SINT6 0x40000096
-#define HV_X64_MSR_SINT7 0x40000097
-#define HV_X64_MSR_SINT8 0x40000098
-#define HV_X64_MSR_SINT9 0x40000099
-#define HV_X64_MSR_SINT10 0x4000009A
-#define HV_X64_MSR_SINT11 0x4000009B
-#define HV_X64_MSR_SINT12 0x4000009C
-#define HV_X64_MSR_SINT13 0x4000009D
-#define HV_X64_MSR_SINT14 0x4000009E
-#define HV_X64_MSR_SINT15 0x4000009F
-
-/*
- * Synthetic Timer MSRs. Four timers per vcpu.
- */
-#define HV_X64_MSR_STIMER0_CONFIG 0x400000B0
-#define HV_X64_MSR_STIMER0_COUNT 0x400000B1
-#define HV_X64_MSR_STIMER1_CONFIG 0x400000B2
-#define HV_X64_MSR_STIMER1_COUNT 0x400000B3
-#define HV_X64_MSR_STIMER2_CONFIG 0x400000B4
-#define HV_X64_MSR_STIMER2_COUNT 0x400000B5
-#define HV_X64_MSR_STIMER3_CONFIG 0x400000B6
-#define HV_X64_MSR_STIMER3_COUNT 0x400000B7
-
-/* Hyper-V guest crash notification MSR's */
-#define HV_X64_MSR_CRASH_P0 0x40000100
-#define HV_X64_MSR_CRASH_P1 0x40000101
-#define HV_X64_MSR_CRASH_P2 0x40000102
-#define HV_X64_MSR_CRASH_P3 0x40000103
-#define HV_X64_MSR_CRASH_P4 0x40000104
-#define HV_X64_MSR_CRASH_CTL 0x40000105
-#define HV_X64_MSR_CRASH_CTL_NOTIFY (1ULL << 63)
-#define HV_X64_MSR_CRASH_PARAMS \
- (1 + (HV_X64_MSR_CRASH_P4 - HV_X64_MSR_CRASH_P0))
-
-#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001
-#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12
-#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
- (~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
-
-/* Declare the various hypercall operations. */
-#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT 0x0008
-
-#define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE 0x00000001
-#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT 12
-#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
- (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
-
-#define HV_X64_MSR_TSC_REFERENCE_ENABLE 0x00000001
-#define HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT 12
-
-#define HV_PROCESSOR_POWER_STATE_C0 0
-#define HV_PROCESSOR_POWER_STATE_C1 1
-#define HV_PROCESSOR_POWER_STATE_C2 2
-#define HV_PROCESSOR_POWER_STATE_C3 3
-
-/* hypercall status code */
-#define HV_STATUS_SUCCESS 0
-#define HV_STATUS_INVALID_HYPERCALL_CODE 2
-#define HV_STATUS_INVALID_HYPERCALL_INPUT 3
-#define HV_STATUS_INVALID_ALIGNMENT 4
-#define HV_STATUS_INSUFFICIENT_MEMORY 11
-#define HV_STATUS_INVALID_CONNECTION_ID 18
-#define HV_STATUS_INSUFFICIENT_BUFFERS 19
-
-typedef struct _HV_REFERENCE_TSC_PAGE {
- __u32 tsc_sequence;
- __u32 res1;
- __u64 tsc_scale;
- __s64 tsc_offset;
-} HV_REFERENCE_TSC_PAGE, *PHV_REFERENCE_TSC_PAGE;
-
-#endif
+#include "standard-headers/asm-x86/hyperv.h"
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
index 7f7b592..a5f8935 100755
--- a/scripts/update-linux-headers.sh
+++ b/scripts/update-linux-headers.sh
@@ -28,39 +28,33 @@ if [ -z "$output" ]; then
output="$PWD"
fi
-cp_virtio() {
- from=$1
+cp_portable() {
+ f=$1
to=$2
- virtio=$(find "$from" -name '*virtio*h' -o -name "input.h" -o -name "pci_regs.h")
- if [ "$virtio" ]; then
- rm -rf "$to"
- mkdir -p "$to"
- for f in $virtio; do
- if
- grep '#include' "$f" | grep -v -e 'linux/virtio' \
- -e 'linux/types' \
- -e 'stdint' \
- -e 'linux/if_ether' \
- -e 'sys/' \
- > /dev/null
- then
- echo "Unexpected #include in input file $f".
- exit 2
- fi
-
- header=$(basename "$f");
- sed -e 's/__u\([0-9][0-9]*\)/uint\1_t/g' \
- -e 's/__s\([0-9][0-9]*\)/int\1_t/g' \
- -e 's/__le\([0-9][0-9]*\)/uint\1_t/g' \
- -e 's/__be\([0-9][0-9]*\)/uint\1_t/g' \
- -e 's/<linux\/\([^>]*\)>/"standard-headers\/linux\/\1"/' \
- -e 's/__bitwise__//' \
- -e 's/__attribute__((packed))/QEMU_PACKED/' \
- -e 's/__inline__/inline/' \
- -e '/sys\/ioctl.h/d' \
- "$f" > "$to/$header";
- done
+ mkdir -p "$to"
+ if
+ grep '#include' "$f" | grep -v -e 'linux/virtio' \
+ -e 'linux/types' \
+ -e 'stdint' \
+ -e 'linux/if_ether' \
+ -e 'sys/' \
+ > /dev/null
+ then
+ echo "Unexpected #include in input file $f".
+ exit 2
fi
+
+ header=$(basename "$f");
+ sed -e 's/__u\([0-9][0-9]*\)/uint\1_t/g' \
+ -e 's/__s\([0-9][0-9]*\)/int\1_t/g' \
+ -e 's/__le\([0-9][0-9]*\)/uint\1_t/g' \
+ -e 's/__be\([0-9][0-9]*\)/uint\1_t/g' \
+ -e 's/<linux\/\([^>]*\)>/"standard-headers\/linux\/\1"/' \
+ -e 's/__bitwise__//' \
+ -e 's/__attribute__((packed))/QEMU_PACKED/' \
+ -e 's/__inline__/inline/' \
+ -e '/sys\/ioctl.h/d' \
+ "$f" > "$to/$header";
}
# This will pick up non-directories too (eg "Kconfig") but we will
@@ -68,6 +62,8 @@ cp_virtio() {
ARCHLIST=$(cd "$linux/arch" && echo *)
for arch in $ARCHLIST; do
+ rm -rf "$output/include/standard-headers/$arch"
+
# Discard anything which isn't a KVM-supporting architecture
if ! [ -e "$linux/arch/$arch/include/asm/kvm.h" ] &&
! [ -e "$linux/arch/$arch/include/uapi/asm/kvm.h" ] ; then
@@ -86,14 +82,16 @@ for arch in $ARCHLIST; do
for header in kvm.h kvm_para.h; do
cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
done
- if [ $arch = x86 ]; then
- cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
- fi
if [ $arch = powerpc ]; then
cp "$tmpdir/include/asm/epapr_hcalls.h" "$output/linux-headers/asm-powerpc/"
fi
-
- cp_virtio "$tmpdir/include/asm" "$output/include/standard-headers/asm-$arch"
+ if [ $arch = s390 ]; then
+ cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/"
+ cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/"
+ fi
+ if [ $arch = x86 ]; then
+ cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-$arch/"
+ fi
done
rm -rf "$output/linux-headers/linux"
@@ -113,6 +111,9 @@ else
cp "$linux/COPYING" "$output/linux-headers"
fi
+cat <<EOF >$output/linux-headers/asm-x86/hyperv.h
+#include "standard-headers/asm-x86/hyperv.h"
+EOF
cat <<EOF >$output/linux-headers/linux/virtio_config.h
#include "standard-headers/linux/virtio_config.h"
EOF
@@ -120,7 +121,11 @@ cat <<EOF >$output/linux-headers/linux/virtio_ring.h
#include "standard-headers/linux/virtio_ring.h"
EOF
-cp_virtio "$tmpdir/include/linux/" "$output/include/standard-headers/linux"
+rm -rf "$output/include/standard-headers/linux"
+for i in "$tmpdir"/include/linux/*virtio*.h "$tmpdir/include/linux/input.h" \
+ "$tmpdir/include/linux/pci_regs.h"; do
+ cp_portable "$i" "$output/include/standard-headers/linux"
+done
cat <<EOF >$output/include/standard-headers/linux/types.h
#include <stdint.h>
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 066d03d..d8a11be 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -33,7 +33,7 @@
#include "hw/i386/apic_internal.h"
#include "hw/i386/apic-msidef.h"
#include "exec/ioport.h"
-#include <asm/hyperv.h>
+#include "standard-headers/asm-x86/hyperv.h"
#include "hw/pci/pci.h"
#include "migration/migration.h"
#include "exec/memattrs.h"
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2
2015-09-09 13:25 ` [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2 Paolo Bonzini
@ 2015-09-09 14:23 ` Cornelia Huck
2015-09-09 14:31 ` Paolo Bonzini
0 siblings, 1 reply; 6+ messages in thread
From: Cornelia Huck @ 2015-09-09 14:23 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: den, qemu-devel
On Wed, 9 Sep 2015 15:25:51 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> hw/pci/pcie_aer.c | 4 +-
> include/standard-headers/linux/pci_regs.h | 381 ++++++++++++++++++++-------
> include/standard-headers/linux/virtio_ring.h | 3 +-
> linux-headers/asm-x86/hyperv.h | 2 +
> linux-headers/asm-x86/kvm.h | 4 +-
> linux-headers/linux/kvm.h | 1 -
> scripts/update-linux-headers.sh | 1 +
> 7 files changed, 294 insertions(+), 102 deletions(-)
> diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
> index b974c85..3bac873 100644
> --- a/linux-headers/linux/kvm.h
> +++ b/linux-headers/linux/kvm.h
> @@ -317,7 +317,6 @@ struct kvm_run {
> struct {
> #define KVM_SYSTEM_EVENT_SHUTDOWN 1
> #define KVM_SYSTEM_EVENT_RESET 2
> -#define KVM_SYSTEM_EVENT_CRASH 3
I wonder where this hunk comes from? I don't see it when I run (your
modified) update-linux-headers.sh against qemu master + Linux 4.2?
> __u32 type;
> __u64 flags;
> } system_event;
> diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
> index f0e830c..7f7b592 100755
> --- a/scripts/update-linux-headers.sh
> +++ b/scripts/update-linux-headers.sh
> @@ -39,6 +39,7 @@ cp_virtio() {
> if
> grep '#include' "$f" | grep -v -e 'linux/virtio' \
> -e 'linux/types' \
> + -e 'stdint' \
> -e 'linux/if_ether' \
> -e 'sys/' \
> > /dev/null
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2
2015-09-09 14:23 ` Cornelia Huck
@ 2015-09-09 14:31 ` Paolo Bonzini
0 siblings, 0 replies; 6+ messages in thread
From: Paolo Bonzini @ 2015-09-09 14:31 UTC (permalink / raw)
To: Cornelia Huck; +Cc: den, qemu-devel
On 09/09/2015 16:23, Cornelia Huck wrote:
>> > diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
>> > index b974c85..3bac873 100644
>> > --- a/linux-headers/linux/kvm.h
>> > +++ b/linux-headers/linux/kvm.h
>> > @@ -317,7 +317,6 @@ struct kvm_run {
>> > struct {
>> > #define KVM_SYSTEM_EVENT_SHUTDOWN 1
>> > #define KVM_SYSTEM_EVENT_RESET 2
>> > -#define KVM_SYSTEM_EVENT_CRASH 3
> I wonder where this hunk comes from? I don't see it when I run (your
> modified) update-linux-headers.sh against qemu master + Linux 4.2?
That line actually will be added in Linux 4.3, it's in this patch just
because of an unclean tree.
Paolo
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers
2015-09-09 13:25 ` [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers Paolo Bonzini
@ 2015-09-09 14:48 ` Cornelia Huck
0 siblings, 0 replies; 6+ messages in thread
From: Cornelia Huck @ 2015-09-09 14:48 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: den, qemu-devel
On Wed, 9 Sep 2015 15:25:52 +0200
Paolo Bonzini <pbonzini@redhat.com> wrote:
> The Hyper-V definitions are an industry standard and can be used
> from code that is not KVM-specific.
>
> The changes to scripts/update-linux-headers.sh are required because there
> is both an asm-x86/hyperv.h and a linux/hyperv.h file. linux/hyperv.h
> introduces dependencies on additional Linux uapi headers, so we only
> want the former.
>
> The solution is to make cp_virtio (now renamed to cp_portable) copy
> one file only, instead of using the "find" command, and call it multiple
> times. The new function is really just a reindentation of the old one.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> .../standard-headers}/asm-x86/hyperv.h | 10 +-
> linux-headers/asm-x86/hyperv.h | 253 +--------------------
> scripts/update-linux-headers.sh | 79 ++++---
> target-i386/kvm.c | 2 +-
> 4 files changed, 49 insertions(+), 295 deletions(-)
> copy {linux-headers => include/standard-headers}/asm-x86/hyperv.h (98%)
>
> diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
> index 7f7b592..a5f8935 100755
> --- a/scripts/update-linux-headers.sh
> +++ b/scripts/update-linux-headers.sh
> @@ -28,39 +28,33 @@ if [ -z "$output" ]; then
> output="$PWD"
> fi
>
> -cp_virtio() {
> - from=$1
> +cp_portable() {
> + f=$1
> to=$2
> - virtio=$(find "$from" -name '*virtio*h' -o -name "input.h" -o -name "pci_regs.h")
> - if [ "$virtio" ]; then
> - rm -rf "$to"
> - mkdir -p "$to"
> - for f in $virtio; do
> - if
> - grep '#include' "$f" | grep -v -e 'linux/virtio' \
> - -e 'linux/types' \
> - -e 'stdint' \
> - -e 'linux/if_ether' \
> - -e 'sys/' \
> - > /dev/null
> - then
> - echo "Unexpected #include in input file $f".
> - exit 2
> - fi
> -
> - header=$(basename "$f");
> - sed -e 's/__u\([0-9][0-9]*\)/uint\1_t/g' \
> - -e 's/__s\([0-9][0-9]*\)/int\1_t/g' \
> - -e 's/__le\([0-9][0-9]*\)/uint\1_t/g' \
> - -e 's/__be\([0-9][0-9]*\)/uint\1_t/g' \
> - -e 's/<linux\/\([^>]*\)>/"standard-headers\/linux\/\1"/' \
> - -e 's/__bitwise__//' \
> - -e 's/__attribute__((packed))/QEMU_PACKED/' \
> - -e 's/__inline__/inline/' \
> - -e '/sys\/ioctl.h/d' \
> - "$f" > "$to/$header";
> - done
> + mkdir -p "$to"
I'd probably move the mkdir outside of this function and...
> + if
> + grep '#include' "$f" | grep -v -e 'linux/virtio' \
> + -e 'linux/types' \
> + -e 'stdint' \
> + -e 'linux/if_ether' \
> + -e 'sys/' \
> + > /dev/null
> + then
> + echo "Unexpected #include in input file $f".
> + exit 2
> fi
> +
> + header=$(basename "$f");
> + sed -e 's/__u\([0-9][0-9]*\)/uint\1_t/g' \
> + -e 's/__s\([0-9][0-9]*\)/int\1_t/g' \
> + -e 's/__le\([0-9][0-9]*\)/uint\1_t/g' \
> + -e 's/__be\([0-9][0-9]*\)/uint\1_t/g' \
> + -e 's/<linux\/\([^>]*\)>/"standard-headers\/linux\/\1"/' \
> + -e 's/__bitwise__//' \
> + -e 's/__attribute__((packed))/QEMU_PACKED/' \
> + -e 's/__inline__/inline/' \
> + -e '/sys\/ioctl.h/d' \
> + "$f" > "$to/$header";
> }
>
> # This will pick up non-directories too (eg "Kconfig") but we will
> @@ -68,6 +62,8 @@ cp_virtio() {
> ARCHLIST=$(cd "$linux/arch" && echo *)
>
> for arch in $ARCHLIST; do
> + rm -rf "$output/include/standard-headers/$arch"
...move this line to...
> +
> # Discard anything which isn't a KVM-supporting architecture
> if ! [ -e "$linux/arch/$arch/include/asm/kvm.h" ] &&
> ! [ -e "$linux/arch/$arch/include/uapi/asm/kvm.h" ] ; then
> @@ -86,14 +82,16 @@ for arch in $ARCHLIST; do
> for header in kvm.h kvm_para.h; do
> cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
> done
> - if [ $arch = x86 ]; then
> - cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
> - fi
> if [ $arch = powerpc ]; then
> cp "$tmpdir/include/asm/epapr_hcalls.h" "$output/linux-headers/asm-powerpc/"
> fi
> -
> - cp_virtio "$tmpdir/include/asm" "$output/include/standard-headers/asm-$arch"
...just before you actually handle the architectures with standard
headers.
> + if [ $arch = s390 ]; then
> + cp_portable "$tmpdir/include/asm/kvm_virtio.h" "$output/include/standard-headers/asm-s390/"
> + cp_portable "$tmpdir/include/asm/virtio-ccw.h" "$output/include/standard-headers/asm-s390/"
> + fi
> + if [ $arch = x86 ]; then
> + cp_portable "$tmpdir/include/asm/hyperv.h" "$output/include/standard-headers/asm-$arch/"
Either make this "asm-x86" or use "asm-$arch" instead of "asm-s390"
above; else looks a bit inconsistent :)
> + fi
> done
>
> rm -rf "$output/linux-headers/linux"
> @@ -113,6 +111,9 @@ else
> cp "$linux/COPYING" "$output/linux-headers"
> fi
>
> +cat <<EOF >$output/linux-headers/asm-x86/hyperv.h
> +#include "standard-headers/asm-x86/hyperv.h"
> +EOF
> cat <<EOF >$output/linux-headers/linux/virtio_config.h
> #include "standard-headers/linux/virtio_config.h"
> EOF
> @@ -120,7 +121,11 @@ cat <<EOF >$output/linux-headers/linux/virtio_ring.h
> #include "standard-headers/linux/virtio_ring.h"
> EOF
>
> -cp_virtio "$tmpdir/include/linux/" "$output/include/standard-headers/linux"
> +rm -rf "$output/include/standard-headers/linux"
> +for i in "$tmpdir"/include/linux/*virtio*.h "$tmpdir/include/linux/input.h" \
> + "$tmpdir/include/linux/pci_regs.h"; do
> + cp_portable "$i" "$output/include/standard-headers/linux"
> +done
>
> cat <<EOF >$output/include/standard-headers/linux/types.h
> #include <stdint.h>
On the whole, this looks reasonable.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-09-09 14:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-09 13:25 [Qemu-devel] [PATCH 0/2] update-linux-headers changes Paolo Bonzini
2015-09-09 13:25 ` [Qemu-devel] [PATCH 1/2] update Linux headers to 4.2 Paolo Bonzini
2015-09-09 14:23 ` Cornelia Huck
2015-09-09 14:31 ` Paolo Bonzini
2015-09-09 13:25 ` [Qemu-devel] [PATCH 2/2] target-i386: move asm-x86/hyperv.h to standard-headers Paolo Bonzini
2015-09-09 14:48 ` Cornelia Huck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).