From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Alberto Garcia <berto@igalia.com>,
Markus Armbruster <armbru@redhat.com>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v5 19/38] block: Fail requests to empty BlockBackend
Date: Fri, 18 Sep 2015 17:22:54 +0200 [thread overview]
Message-ID: <1442589793-7105-20-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1442589793-7105-1-git-send-email-mreitz@redhat.com>
If there is no BlockDriverState in a BlockBackend or if the tray of the
guest device is open, fail all requests (where that is possible) with
-ENOMEDIUM.
The reason the status of the guest device is taken into account is
because once the guest device's tray is opened, any request on the same
BlockBackend as the guest uses should fail. If the BDS tree is supposed
to be usable even after ejecting it from the guest, a different
BlockBackend must be used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
block/block-backend.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/block/block-backend.c b/block/block-backend.c
index 417374f..0da4be9 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -509,7 +509,7 @@ static int blk_check_byte_request(BlockBackend *blk, int64_t offset,
return -EIO;
}
- if (!blk_is_inserted(blk)) {
+ if (!blk_is_available(blk)) {
return -ENOMEDIUM;
}
@@ -648,6 +648,10 @@ int blk_pwrite(BlockBackend *blk, int64_t offset, const void *buf, int count)
int64_t blk_getlength(BlockBackend *blk)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_getlength(blk->bs);
}
@@ -658,6 +662,10 @@ void blk_get_geometry(BlockBackend *blk, uint64_t *nb_sectors_ptr)
int64_t blk_nb_sectors(BlockBackend *blk)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_nb_sectors(blk->bs);
}
@@ -688,6 +696,10 @@ BlockAIOCB *blk_aio_writev(BlockBackend *blk, int64_t sector_num,
BlockAIOCB *blk_aio_flush(BlockBackend *blk,
BlockCompletionFunc *cb, void *opaque)
{
+ if (!blk_is_available(blk)) {
+ return abort_aio_request(blk, cb, opaque, -ENOMEDIUM);
+ }
+
return bdrv_aio_flush(blk->bs, cb, opaque);
}
@@ -729,12 +741,20 @@ int blk_aio_multiwrite(BlockBackend *blk, BlockRequest *reqs, int num_reqs)
int blk_ioctl(BlockBackend *blk, unsigned long int req, void *buf)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_ioctl(blk->bs, req, buf);
}
BlockAIOCB *blk_aio_ioctl(BlockBackend *blk, unsigned long int req, void *buf,
BlockCompletionFunc *cb, void *opaque)
{
+ if (!blk_is_available(blk)) {
+ return abort_aio_request(blk, cb, opaque, -ENOMEDIUM);
+ }
+
return bdrv_aio_ioctl(blk->bs, req, buf, cb, opaque);
}
@@ -750,11 +770,19 @@ int blk_co_discard(BlockBackend *blk, int64_t sector_num, int nb_sectors)
int blk_co_flush(BlockBackend *blk)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_co_flush(blk->bs);
}
int blk_flush(BlockBackend *blk)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_flush(blk->bs);
}
@@ -876,6 +904,11 @@ void blk_set_enable_write_cache(BlockBackend *blk, bool wce)
void blk_invalidate_cache(BlockBackend *blk, Error **errp)
{
+ if (!blk->bs) {
+ error_setg(errp, "Device '%s' has no medium", blk->name);
+ return;
+ }
+
bdrv_invalidate_cache(blk->bs, errp);
}
@@ -1031,6 +1064,10 @@ int blk_write_compressed(BlockBackend *blk, int64_t sector_num,
int blk_truncate(BlockBackend *blk, int64_t offset)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_truncate(blk->bs, offset);
}
@@ -1047,21 +1084,37 @@ int blk_discard(BlockBackend *blk, int64_t sector_num, int nb_sectors)
int blk_save_vmstate(BlockBackend *blk, const uint8_t *buf,
int64_t pos, int size)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_save_vmstate(blk->bs, buf, pos, size);
}
int blk_load_vmstate(BlockBackend *blk, uint8_t *buf, int64_t pos, int size)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_load_vmstate(blk->bs, buf, pos, size);
}
int blk_probe_blocksizes(BlockBackend *blk, BlockSizes *bsz)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_probe_blocksizes(blk->bs, bsz);
}
int blk_probe_geometry(BlockBackend *blk, HDGeometry *geo)
{
+ if (!blk_is_available(blk)) {
+ return -ENOMEDIUM;
+ }
+
return bdrv_probe_geometry(blk->bs, geo);
}
--
2.5.2
next prev parent reply other threads:[~2015-09-18 15:24 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 15:22 [Qemu-devel] [PATCH v5 00/38] blockdev: BlockBackend and media Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 01/38] block: Remove host floppy support Max Reitz
2015-09-18 15:31 ` Eric Blake
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 02/38] block: Set BDRV_O_INCOMING in bdrv_fill_options() Max Reitz
2015-09-18 15:32 ` Eric Blake
2015-09-29 8:53 ` Alberto Garcia
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 03/38] blockdev: Allow creation of BDS trees without BB Max Reitz
2015-09-18 15:34 ` Eric Blake
2015-09-29 8:45 ` Alberto Garcia
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 04/38] iotests: Only create BB if necessary Max Reitz
2015-09-18 16:00 ` Eric Blake
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 05/38] block: Make bdrv_is_inserted() return a bool Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 06/38] block: Add blk_is_available() Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 07/38] block: Make bdrv_is_inserted() recursive Max Reitz
2015-09-18 16:20 ` Eric Blake
2015-09-29 9:15 ` Alberto Garcia
2015-09-30 14:32 ` Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 08/38] block/raw_bsd: Drop raw_is_inserted() Max Reitz
2015-09-18 16:20 ` Eric Blake
2015-09-29 10:47 ` Alberto Garcia
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 09/38] block: Invoke change media CB before NULLing drv Max Reitz
2015-09-18 16:22 ` Eric Blake
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 10/38] hw/block/fdc: Implement tray status Max Reitz
2015-09-18 16:24 ` Eric Blake
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 11/38] hw/usb-storage: Check whether BB is inserted Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 12/38] block: Fix BB AIOCB AioContext without BDS Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 13/38] block: Move guest_block_size into BlockBackend Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 14/38] block: Remove wr_highest_sector from BlockAcctStats Max Reitz
2015-09-18 16:59 ` Eric Blake
2015-09-21 7:57 ` Kevin Wolf
2015-09-21 15:53 ` Eric Blake
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 15/38] block: Move BlockAcctStats into BlockBackend Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 16/38] block: Move I/O status and error actions into BB Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 17/38] block: Add BlockBackendRootState Max Reitz
2015-09-22 14:17 ` Kevin Wolf
2015-09-22 15:00 ` Max Reitz
2015-09-29 11:17 ` Alberto Garcia
2015-09-29 12:30 ` Eric Blake
2015-09-29 13:12 ` Kevin Wolf
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 18/38] block: Make some BB functions fall back to BBRS Max Reitz
2015-09-18 15:22 ` Max Reitz [this message]
2015-09-22 14:30 ` [Qemu-devel] [PATCH v5 19/38] block: Fail requests to empty BlockBackend Kevin Wolf
2015-09-22 15:05 ` Max Reitz
2015-09-22 15:13 ` Kevin Wolf
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 20/38] block: Prepare remaining BB functions for NULL BDS Max Reitz
2015-09-22 14:35 ` Kevin Wolf
2015-09-22 15:07 ` Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 21/38] block: Add blk_insert_bs() Max Reitz
2015-09-22 14:42 ` Kevin Wolf
2015-09-22 15:20 ` Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 22/38] block: Prepare for NULL BDS Max Reitz
2015-09-18 19:42 ` Eric Blake
2015-10-07 10:43 ` Kevin Wolf
2015-10-07 15:08 ` Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 23/38] blockdev: Do not create BDS for empty drive Max Reitz
2015-09-18 15:22 ` [Qemu-devel] [PATCH v5 24/38] blockdev: Pull out blockdev option extraction Max Reitz
2015-09-30 11:16 ` Alberto Garcia
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 25/38] blockdev: Allow more options for BB-less BDS tree Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 26/38] block: Add blk_remove_bs() Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 27/38] blockdev: Add blockdev-open-tray Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 28/38] blockdev: Add blockdev-close-tray Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 29/38] blockdev: Add blockdev-remove-medium Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 30/38] blockdev: Add blockdev-insert-medium Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 31/38] blockdev: Implement eject with basic operations Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 32/38] blockdev: Implement change " Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 33/38] block: Inquire tray state before tray-moved events Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 34/38] qmp: Introduce blockdev-change-medium Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 35/38] hmp: Use blockdev-change-medium for change command Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 36/38] blockdev: read-only-mode for blockdev-change-medium Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 37/38] hmp: Add read-only-mode option to change command Max Reitz
2015-09-18 15:23 ` [Qemu-devel] [PATCH v5 38/38] iotests: Add test for change-related QMP commands Max Reitz
2015-09-22 14:45 ` [Qemu-devel] [PATCH v5 00/38] blockdev: BlockBackend and media Kevin Wolf
2015-09-22 15:09 ` Max Reitz
2015-09-23 6:20 ` Wen Congyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442589793-7105-20-git-send-email-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=armbru@redhat.com \
--cc=berto@igalia.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).