From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Cc: Aurelien Jarno <aurelien@aurel32.net>
Subject: [Qemu-devel] [PULL 2/3] tcg/mips: move tcg_out_addsub2
Date: Mon, 21 Sep 2015 00:39:21 +0200 [thread overview]
Message-ID: <1442788762-10496-3-git-send-email-aurelien@aurel32.net> (raw)
In-Reply-To: <1442788762-10496-1-git-send-email-aurelien@aurel32.net>
Somehow the tcg_out_addsub2 function ended-up in the middle of the
qemu_ld/st related functions. Move it with other arithmetics related
functions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
tcg/mips/tcg-target.c | 98 +++++++++++++++++++++++++--------------------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/tcg/mips/tcg-target.c b/tcg/mips/tcg-target.c
index 38c9682..4f1e002 100644
--- a/tcg/mips/tcg-target.c
+++ b/tcg/mips/tcg-target.c
@@ -567,6 +567,55 @@ static inline void tcg_out_addi(TCGContext *s, TCGReg reg, TCGArg val)
}
}
+static void tcg_out_addsub2(TCGContext *s, TCGReg rl, TCGReg rh, TCGReg al,
+ TCGReg ah, TCGArg bl, TCGArg bh, bool cbl,
+ bool cbh, bool is_sub)
+{
+ TCGReg th = TCG_TMP1;
+
+ /* If we have a negative constant such that negating it would
+ make the high part zero, we can (usually) eliminate one insn. */
+ if (cbl && cbh && bh == -1 && bl != 0) {
+ bl = -bl;
+ bh = 0;
+ is_sub = !is_sub;
+ }
+
+ /* By operating on the high part first, we get to use the final
+ carry operation to move back from the temporary. */
+ if (!cbh) {
+ tcg_out_opc_reg(s, (is_sub ? OPC_SUBU : OPC_ADDU), th, ah, bh);
+ } else if (bh != 0 || ah == rl) {
+ tcg_out_opc_imm(s, OPC_ADDIU, th, ah, (is_sub ? -bh : bh));
+ } else {
+ th = ah;
+ }
+
+ /* Note that tcg optimization should eliminate the bl == 0 case. */
+ if (is_sub) {
+ if (cbl) {
+ tcg_out_opc_imm(s, OPC_SLTIU, TCG_TMP0, al, bl);
+ tcg_out_opc_imm(s, OPC_ADDIU, rl, al, -bl);
+ } else {
+ tcg_out_opc_reg(s, OPC_SLTU, TCG_TMP0, al, bl);
+ tcg_out_opc_reg(s, OPC_SUBU, rl, al, bl);
+ }
+ tcg_out_opc_reg(s, OPC_SUBU, rh, th, TCG_TMP0);
+ } else {
+ if (cbl) {
+ tcg_out_opc_imm(s, OPC_ADDIU, rl, al, bl);
+ tcg_out_opc_imm(s, OPC_SLTIU, TCG_TMP0, rl, bl);
+ } else if (rl == al && rl == bl) {
+ tcg_out_opc_sa(s, OPC_SRL, TCG_TMP0, al, 31);
+ tcg_out_opc_reg(s, OPC_ADDU, rl, al, bl);
+ } else {
+ tcg_out_opc_reg(s, OPC_ADDU, rl, al, bl);
+ tcg_out_opc_reg(s, OPC_SLTU, TCG_TMP0, rl, (rl == bl ? al : bl));
+ }
+ tcg_out_opc_reg(s, OPC_ADDU, rh, th, TCG_TMP0);
+ }
+}
+
/* Bit 0 set if inversion required; bit 1 set if swapping required. */
#define MIPS_CMP_INV 1
#define MIPS_CMP_SWAP 2
@@ -1237,55 +1286,6 @@ static void tcg_out_qemu_st_direct(TCGContext *s, TCGReg datalo, TCGReg datahi,
}
}
-static void tcg_out_addsub2(TCGContext *s, TCGReg rl, TCGReg rh, TCGReg al,
- TCGReg ah, TCGArg bl, TCGArg bh, bool cbl,
- bool cbh, bool is_sub)
-{
- TCGReg th = TCG_TMP1;
-
- /* If we have a negative constant such that negating it would
- make the high part zero, we can (usually) eliminate one insn. */
- if (cbl && cbh && bh == -1 && bl != 0) {
- bl = -bl;
- bh = 0;
- is_sub = !is_sub;
- }
-
- /* By operating on the high part first, we get to use the final
- carry operation to move back from the temporary. */
- if (!cbh) {
- tcg_out_opc_reg(s, (is_sub ? OPC_SUBU : OPC_ADDU), th, ah, bh);
- } else if (bh != 0 || ah == rl) {
- tcg_out_opc_imm(s, OPC_ADDIU, th, ah, (is_sub ? -bh : bh));
- } else {
- th = ah;
- }
-
- /* Note that tcg optimization should eliminate the bl == 0 case. */
- if (is_sub) {
- if (cbl) {
- tcg_out_opc_imm(s, OPC_SLTIU, TCG_TMP0, al, bl);
- tcg_out_opc_imm(s, OPC_ADDIU, rl, al, -bl);
- } else {
- tcg_out_opc_reg(s, OPC_SLTU, TCG_TMP0, al, bl);
- tcg_out_opc_reg(s, OPC_SUBU, rl, al, bl);
- }
- tcg_out_opc_reg(s, OPC_SUBU, rh, th, TCG_TMP0);
- } else {
- if (cbl) {
- tcg_out_opc_imm(s, OPC_ADDIU, rl, al, bl);
- tcg_out_opc_imm(s, OPC_SLTIU, TCG_TMP0, rl, bl);
- } else if (rl == al && rl == bl) {
- tcg_out_opc_sa(s, OPC_SRL, TCG_TMP0, al, 31);
- tcg_out_opc_reg(s, OPC_ADDU, rl, al, bl);
- } else {
- tcg_out_opc_reg(s, OPC_ADDU, rl, al, bl);
- tcg_out_opc_reg(s, OPC_SLTU, TCG_TMP0, rl, (rl == bl ? al : bl));
- }
- tcg_out_opc_reg(s, OPC_ADDU, rh, th, TCG_TMP0);
- }
-}
-
static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is_64)
{
TCGReg addr_regl, addr_regh __attribute__((unused));
--
2.1.4
next prev parent reply other threads:[~2015-09-20 22:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-20 22:39 [Qemu-devel] [PULL 0/3] TCG MIPS queue Aurelien Jarno
2015-09-20 22:39 ` [Qemu-devel] [PULL 1/3] tcg/mips: Fix clobbering of qemu_ld inputs Aurelien Jarno
2015-09-20 22:39 ` Aurelien Jarno [this message]
2015-09-20 22:39 ` [Qemu-devel] [PULL 3/3] tcg/mips: pass oi to tcg_out_tlb_load Aurelien Jarno
2015-09-21 21:03 ` [Qemu-devel] [PULL 0/3] TCG MIPS queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442788762-10496-3-git-send-email-aurelien@aurel32.net \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).