From: Jeff Cody <jcody@redhat.com>
To: qemu-block@nongnu.org
Cc: peter.maydell@linaro.org, jcody@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 5/7] Backup: don't do copy-on-read in before_write_notifier
Date: Fri, 25 Sep 2015 11:50:54 -0400 [thread overview]
Message-ID: <1443196256-5601-6-git-send-email-jcody@redhat.com> (raw)
In-Reply-To: <1443196256-5601-1-git-send-email-jcody@redhat.com>
From: Wen Congyang <wency@cn.fujitsu.com>
We will copy data in before_write_notifier to do backup.
It is a nested I/O request, so we cannot do copy-on-read.
The steps to reproduce it:
1. -drive copy-on-read=on,... // qemu option
2. drive_backup -f disk0 /path_to_backup.img // monitor command
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Message-id: 1441682913-14320-3-git-send-email-wency@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
---
block/backup.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/block/backup.c b/block/backup.c
index 965654d..5696431 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -89,7 +89,8 @@ static void cow_request_end(CowRequest *req)
static int coroutine_fn backup_do_cow(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
- bool *error_is_read)
+ bool *error_is_read,
+ bool is_write_notifier)
{
BackupBlockJob *job = (BackupBlockJob *)bs->job;
CowRequest cow_request;
@@ -129,8 +130,14 @@ static int coroutine_fn backup_do_cow(BlockDriverState *bs,
iov.iov_len = n * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
- ret = bdrv_co_readv(bs, start * BACKUP_SECTORS_PER_CLUSTER, n,
- &bounce_qiov);
+ if (is_write_notifier) {
+ ret = bdrv_co_no_copy_on_readv(bs,
+ start * BACKUP_SECTORS_PER_CLUSTER,
+ n, &bounce_qiov);
+ } else {
+ ret = bdrv_co_readv(bs, start * BACKUP_SECTORS_PER_CLUSTER, n,
+ &bounce_qiov);
+ }
if (ret < 0) {
trace_backup_do_cow_read_fail(job, start, ret);
if (error_is_read) {
@@ -190,7 +197,7 @@ static int coroutine_fn backup_before_write_notify(
assert((req->offset & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((req->bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
- return backup_do_cow(req->bs, sector_num, nb_sectors, NULL);
+ return backup_do_cow(req->bs, sector_num, nb_sectors, NULL, true);
}
static void backup_set_speed(BlockJob *job, int64_t speed, Error **errp)
@@ -303,7 +310,8 @@ static int coroutine_fn backup_run_incremental(BackupBlockJob *job)
return ret;
}
ret = backup_do_cow(bs, cluster * BACKUP_SECTORS_PER_CLUSTER,
- BACKUP_SECTORS_PER_CLUSTER, &error_is_read);
+ BACKUP_SECTORS_PER_CLUSTER, &error_is_read,
+ false);
if ((ret < 0) &&
backup_error_action(job, error_is_read, -ret) ==
BLOCK_ERROR_ACTION_REPORT) {
@@ -408,7 +416,7 @@ static void coroutine_fn backup_run(void *opaque)
}
/* FULL sync mode we copy the whole drive. */
ret = backup_do_cow(bs, start * BACKUP_SECTORS_PER_CLUSTER,
- BACKUP_SECTORS_PER_CLUSTER, &error_is_read);
+ BACKUP_SECTORS_PER_CLUSTER, &error_is_read, false);
if (ret < 0) {
/* Depending on error action, fail now or retry cluster */
BlockErrorAction action =
--
1.9.3
next prev parent reply other threads:[~2015-09-25 15:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-25 15:50 [Qemu-devel] [PULL 0/7] Block patches Jeff Cody
2015-09-25 15:50 ` [Qemu-devel] [PULL 1/7] block/nfs: fix calculation of allocated file size Jeff Cody
2015-09-25 15:50 ` [Qemu-devel] [PULL 2/7] block/nfs: cache allocated filesize for read-only files Jeff Cody
2015-09-25 15:50 ` [Qemu-devel] [PULL 3/7] sheepdog: add reopen support Jeff Cody
2015-09-25 15:50 ` [Qemu-devel] [PULL 4/7] block: Introduce a new API bdrv_co_no_copy_on_readv() Jeff Cody
2015-09-25 15:50 ` Jeff Cody [this message]
2015-09-25 15:50 ` [Qemu-devel] [PULL 6/7] sheepdog: use per AIOCB dirty indexes for non overlapping requests Jeff Cody
2015-09-25 15:50 ` [Qemu-devel] [PULL 7/7] sheepdog: refine discard support Jeff Cody
2015-09-25 19:21 ` [Qemu-devel] [PULL 0/7] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443196256-5601-6-git-send-email-jcody@redhat.com \
--to=jcody@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).