From: "Denis V. Lunev" <den@openvz.org>
Cc: Juan Quintela <quintela@redhat.com>,
qemu-devel@nongnu.org, Anna Melekhova <annam@virtuozzo.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Amit Shah <amit.shah@redhat.com>,
"Denis V. Lunev" <den@openvz.org>
Subject: [Qemu-devel] [PATCH 1/1] migration: fix deadlock
Date: Mon, 28 Sep 2015 14:41:58 +0300 [thread overview]
Message-ID: <1443440518-4384-1-git-send-email-den@openvz.org> (raw)
Release qemu global mutex before call synchronize_rcu().
synchronize_rcu() waiting for all readers to finish their critical
sections. There is at least one critical section in which we try
to get QGM (critical section is in address_space_rw() and
prepare_mmio_access() is trying to aquire QGM).
Both functions (migration_end() and migration_bitmap_extend())
are called from main thread which is holding QGM.
Thus there is a race condition that ends up with deadlock:
main thread working thread
Lock QGA |
| Call KVM_EXIT_IO handler
| |
| Open rcu reader's critical section
Migration cleanup bh |
| |
synchronize_rcu() is |
waiting for readers |
| prepare_mmio_access() is waiting for QGM
\ /
deadlock
The patch changes bitmap freeing from direct g_free after synchronize_rcu
to free inside call_rcu.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Igor Redko <redkoi@virtuozzo.com>
Tested-by: Igor Redko <redkoi@virtuozzo.com>
CC: Anna Melekhova <annam@virtuozzo.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Wen Congyang <wency@cn.fujitsu.com>
---
migration/ram.c | 44 +++++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/migration/ram.c b/migration/ram.c
index 7f007e6..e7c5bcf 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -221,12 +221,16 @@ static RAMBlock *last_seen_block;
/* This is the last block from where we have sent data */
static RAMBlock *last_sent_block;
static ram_addr_t last_offset;
-static unsigned long *migration_bitmap;
static QemuMutex migration_bitmap_mutex;
static uint64_t migration_dirty_pages;
static uint32_t last_version;
static bool ram_bulk_stage;
+static struct BitmapRcu {
+ struct rcu_head rcu;
+ unsigned long *bmap;
+} *migration_bitmap_rcu;
+
struct CompressParam {
bool start;
bool done;
@@ -508,7 +512,7 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,
unsigned long next;
- bitmap = atomic_rcu_read(&migration_bitmap);
+ bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
if (ram_bulk_stage && nr > base) {
next = nr + 1;
} else {
@@ -526,7 +530,7 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,
static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
{
unsigned long *bitmap;
- bitmap = atomic_rcu_read(&migration_bitmap);
+ bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
migration_dirty_pages +=
cpu_physical_memory_sync_dirty_bitmap(bitmap, start, length);
}
@@ -1024,17 +1028,22 @@ void free_xbzrle_decoded_buf(void)
xbzrle_decoded_buf = NULL;
}
+static void migration_bitmap_free(struct BitmapRcu *bmap)
+{
+ g_free(bmap->bmap);
+ g_free(bmap);
+}
+
static void migration_end(void)
{
/* caller have hold iothread lock or is in a bh, so there is
* no writing race against this migration_bitmap
*/
- unsigned long *bitmap = migration_bitmap;
- atomic_rcu_set(&migration_bitmap, NULL);
+ struct BitmapRcu *bitmap = migration_bitmap_rcu;
+ atomic_rcu_set(&migration_bitmap_rcu, NULL);
if (bitmap) {
memory_global_dirty_log_stop();
- synchronize_rcu();
- g_free(bitmap);
+ call_rcu(bitmap, migration_bitmap_free, rcu);
}
XBZRLE_cache_lock();
@@ -1070,9 +1079,10 @@ void migration_bitmap_extend(ram_addr_t old, ram_addr_t new)
/* called in qemu main thread, so there is
* no writing race against this migration_bitmap
*/
- if (migration_bitmap) {
- unsigned long *old_bitmap = migration_bitmap, *bitmap;
- bitmap = bitmap_new(new);
+ if (migration_bitmap_rcu) {
+ struct BitmapRcu *old_bitmap = migration_bitmap_rcu, *bitmap;
+ bitmap = g_new(struct BitmapRcu, 1);
+ bitmap->bmap = bitmap_new(new);
/* prevent migration_bitmap content from being set bit
* by migration_bitmap_sync_range() at the same time.
@@ -1080,13 +1090,12 @@ void migration_bitmap_extend(ram_addr_t old, ram_addr_t new)
* at the same time.
*/
qemu_mutex_lock(&migration_bitmap_mutex);
- bitmap_copy(bitmap, old_bitmap, old);
- bitmap_set(bitmap, old, new - old);
- atomic_rcu_set(&migration_bitmap, bitmap);
+ bitmap_copy(bitmap->bmap, old_bitmap->bmap, old);
+ bitmap_set(bitmap->bmap, old, new - old);
+ atomic_rcu_set(&migration_bitmap_rcu, bitmap);
qemu_mutex_unlock(&migration_bitmap_mutex);
migration_dirty_pages += new - old;
- synchronize_rcu();
- g_free(old_bitmap);
+ call_rcu(old_bitmap, migration_bitmap_free, rcu);
}
}
@@ -1145,8 +1154,9 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
reset_ram_globals();
ram_bitmap_pages = last_ram_offset() >> TARGET_PAGE_BITS;
- migration_bitmap = bitmap_new(ram_bitmap_pages);
- bitmap_set(migration_bitmap, 0, ram_bitmap_pages);
+ migration_bitmap_rcu = g_new(struct BitmapRcu, 1);
+ migration_bitmap_rcu->bmap = bitmap_new(ram_bitmap_pages);
+ bitmap_set(migration_bitmap_rcu->bmap, 0, ram_bitmap_pages);
/*
* Count the total number of pages used by ram blocks not including any
--
2.1.4
next reply other threads:[~2015-09-28 11:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 11:41 Denis V. Lunev [this message]
2015-09-28 11:55 ` [Qemu-devel] [PATCH 1/1] migration: fix deadlock Paolo Bonzini
2015-09-29 5:13 ` Amit Shah
2015-09-29 5:43 ` Denis V. Lunev
2015-09-29 5:46 ` Denis V. Lunev
2015-09-30 16:16 ` Juan Quintela
-- strict thread matches above, loose matches on Subject: below --
2015-09-24 12:53 Denis V. Lunev
2015-09-25 1:21 ` Wen Congyang
2015-09-25 8:03 ` Denis V. Lunev
2015-09-25 8:23 ` Wen Congyang
2015-09-29 15:32 ` Igor Redko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443440518-4384-1-git-send-email-den@openvz.org \
--to=den@openvz.org \
--cc=amit.shah@redhat.com \
--cc=annam@virtuozzo.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).