qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, quintela@redhat.com, amit.shah@redhat.com
Cc: aarcange@redhat.com, pbonzini@redhat.com, liang.z.li@intel.com,
	luis@cs.umu.se, bharata@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH v8 40/54] Page request: Consume pages off the post-copy queue
Date: Tue, 29 Sep 2015 09:38:04 +0100	[thread overview]
Message-ID: <1443515898-3594-41-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1443515898-3594-1-git-send-email-dgilbert@redhat.com>

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.

Note:
  a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.

  b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.

  c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/ram.c | 195 +++++++++++++++++++++++++++++++++++++++++++++++---------
 trace-events    |   2 +
 2 files changed, 168 insertions(+), 29 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index 5771983..487e838 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -516,9 +516,9 @@ static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
  * Returns: byte offset within memory region of the start of a dirty page
  */
 static inline
-ram_addr_t migration_bitmap_find_and_reset_dirty(RAMBlock *rb,
-                                                 ram_addr_t start,
-                                                 ram_addr_t *ram_addr_abs)
+ram_addr_t migration_bitmap_find_dirty(RAMBlock *rb,
+                                       ram_addr_t start,
+                                       ram_addr_t *ram_addr_abs)
 {
     unsigned long base = rb->offset >> TARGET_PAGE_BITS;
     unsigned long nr = base + (start >> TARGET_PAGE_BITS);
@@ -535,15 +535,24 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(RAMBlock *rb,
         next = find_next_bit(bitmap, size, nr);
     }
 
-    if (next < size) {
-        clear_bit(next, bitmap);
-        migration_dirty_pages--;
-    }
     *ram_addr_abs = next << TARGET_PAGE_BITS;
     return (next - base) << TARGET_PAGE_BITS;
 }
 
-/* Called with rcu_read_lock() to protect migration_bitmap */
+static inline bool migration_bitmap_clear_dirty(ram_addr_t addr)
+{
+    bool ret;
+    int nr = addr >> TARGET_PAGE_BITS;
+    unsigned long *bitmap = atomic_rcu_read(&migration_bitmap);
+
+    ret = test_and_clear_bit(nr, bitmap);
+
+    if (ret) {
+        migration_dirty_pages--;
+    }
+    return ret;
+}
+
 static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
 {
     unsigned long *bitmap;
@@ -960,9 +969,8 @@ static int ram_save_compressed_page(QEMUFile *f, RAMBlock *block,
 static bool find_dirty_block(QEMUFile *f, PageSearchStatus *pss,
                              bool *again, ram_addr_t *ram_addr_abs)
 {
-    pss->offset = migration_bitmap_find_and_reset_dirty(pss->block,
-                                                       pss->offset,
-                                                       ram_addr_abs);
+    pss->offset = migration_bitmap_find_dirty(pss->block, pss->offset,
+                                              ram_addr_abs);
     if (pss->complete_round && pss->block == last_seen_block &&
         pss->offset >= last_offset) {
         /*
@@ -1001,6 +1009,88 @@ static bool find_dirty_block(QEMUFile *f, PageSearchStatus *pss,
     }
 }
 
+/*
+ * Unqueue a page from the queue fed by postcopy page requests; skips pages
+ * that are already sent (!dirty)
+ *
+ * Returns:      true if a queued page is found
+ *      ms:      MigrationState in
+ *     pss:      PageSearchStatus structure updated with found block/offset
+ * ram_addr_abs: global offset in the dirty/sent bitmaps
+ */
+static bool get_queued_page(MigrationState *ms, PageSearchStatus *pss,
+                            ram_addr_t *ram_addr_abs)
+{
+    RAMBlock  *block;
+    ram_addr_t offset;
+    bool dirty;
+
+    do {
+        block = NULL;
+        qemu_mutex_lock(&ms->src_page_req_mutex);
+        if (!QSIMPLEQ_EMPTY(&ms->src_page_requests)) {
+            struct MigrationSrcPageRequest *entry =
+                                    QSIMPLEQ_FIRST(&ms->src_page_requests);
+            block = entry->rb;
+            offset = entry->offset;
+            *ram_addr_abs = (entry->offset + entry->rb->offset) &
+                            TARGET_PAGE_MASK;
+
+            if (entry->len > TARGET_PAGE_SIZE) {
+                entry->len -= TARGET_PAGE_SIZE;
+                entry->offset += TARGET_PAGE_SIZE;
+            } else {
+                memory_region_unref(block->mr);
+                QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
+                g_free(entry);
+            }
+        }
+        qemu_mutex_unlock(&ms->src_page_req_mutex);
+
+        /*
+         * We're sending this page, and since it's postcopy nothing else
+         * will dirty it, and we must make sure it doesn't get sent again
+         * even if this queue request was received after the background
+         * search already sent it.
+         */
+        if (block) {
+            dirty = test_bit(*ram_addr_abs >> TARGET_PAGE_BITS,
+                             migration_bitmap);
+            if (!dirty) {
+                trace_get_queued_page_not_dirty(
+                    block->idstr, (uint64_t)offset,
+                    (uint64_t)*ram_addr_abs,
+                    test_bit(*ram_addr_abs >> TARGET_PAGE_BITS, ms->sentmap));
+            } else {
+                trace_get_queued_page(block->idstr,
+                                      (uint64_t)offset,
+                                      (uint64_t)*ram_addr_abs);
+            }
+        }
+
+    } while (block && !dirty);
+
+    if (block) {
+        /*
+         * As soon as we start servicing pages out of order, then we have
+         * to kill the bulk stage, since the bulk stage assumes
+         * in (migration_bitmap_find_and_reset_dirty) that every page is
+         * dirty, that's no longer true.
+         */
+        ram_bulk_stage = false;
+
+        /*
+         * We want the background search to continue from the queued page
+         * since the guest is likely to want other pages near to the page
+         * it just requested.
+         */
+        pss->block = block;
+        pss->offset = offset;
+    }
+
+    return !!block;
+}
+
 /**
  * flush_page_queue: Flush any remaining pages in the ram request queue
  *    it should be empty at the end anyway, but in error cases there may be
@@ -1087,6 +1177,57 @@ err:
 
 
 /**
+ * ram_save_host_page: Starting at *offset send pages upto the end
+ *                     of the current host page.  It's valid for the initial
+ *                     offset to point into the middle of a host page
+ *                     in which case the remainder of the hostpage is sent.
+ *                     Only dirty target pages are sent.
+ *
+ * Returns: Number of pages written.
+ *
+ * @f: QEMUFile where to send the data
+ * @block: pointer to block that contains the page we want to send
+ * @offset: offset inside the block for the page; updated to last target page
+ *          sent
+ * @last_stage: if we are at the completion stage
+ * @bytes_transferred: increase it with the number of transferred bytes
+ */
+static int ram_save_host_page(MigrationState *ms, QEMUFile *f, RAMBlock* block,
+                              ram_addr_t *offset, bool last_stage,
+                              uint64_t *bytes_transferred,
+                              ram_addr_t dirty_ram_abs)
+{
+    int tmppages, pages = 0;
+    do {
+        /* Check the pages is dirty and if it is send it */
+        if (migration_bitmap_clear_dirty(dirty_ram_abs)) {
+            if (compression_switch && migrate_use_compression()) {
+                tmppages = ram_save_compressed_page(f, block, *offset,
+                                                    last_stage,
+                                                    bytes_transferred);
+            } else {
+                tmppages = ram_save_page(f, block, *offset, last_stage,
+                                         bytes_transferred);
+            }
+
+            if (tmppages < 0) {
+                return tmppages;
+            }
+            if (ms->sentmap) {
+                set_bit(dirty_ram_abs >> TARGET_PAGE_BITS, ms->sentmap);
+            }
+            pages += tmppages;
+        }
+        *offset += TARGET_PAGE_SIZE;
+        dirty_ram_abs += TARGET_PAGE_SIZE;
+    } while (*offset & (qemu_host_page_size - 1));
+
+    /* The offset we leave with is the last one we looked at */
+    *offset -= TARGET_PAGE_SIZE;
+    return pages;
+}
+
+/**
  * ram_find_and_save_block: Finds a dirty page and sends it to f
  *
  * Called within an RCU critical section.
@@ -1097,12 +1238,16 @@ err:
  * @f: QEMUFile where to send the data
  * @last_stage: if we are at the completion stage
  * @bytes_transferred: increase it with the number of transferred bytes
+ *
+ * On systems where host-page-size > target-page-size it will send all the
+ * pages in a host page that are dirty.
  */
 
 static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
                                    uint64_t *bytes_transferred)
 {
     PageSearchStatus pss;
+    MigrationState *ms = migrate_get_current();
     int pages = 0;
     bool again, found;
     ram_addr_t dirty_ram_abs; /* Address of the start of the dirty page in
@@ -1117,26 +1262,18 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
     }
 
     do {
-        found = find_dirty_block(f, &pss, &again, &dirty_ram_abs);
+        again = true;
+        found = get_queued_page(ms, &pss, &dirty_ram_abs);
 
-        if (found) {
-            if (compression_switch && migrate_use_compression()) {
-                pages = ram_save_compressed_page(f, pss.block, pss.offset,
-                                                 last_stage,
-                                                 bytes_transferred);
-            } else {
-                pages = ram_save_page(f, pss.block, pss.offset, last_stage,
-                                      bytes_transferred);
-            }
+        if (!found) {
+            /* priority queue empty, so just search for something dirty */
+            found = find_dirty_block(f, &pss, &again, &dirty_ram_abs);
+        }
 
-            /* if page is unmodified, continue to the next */
-            if (pages > 0) {
-                MigrationState *ms = migrate_get_current();
-                last_sent_block = pss.block;
-                if (ms->sentmap) {
-                    set_bit(dirty_ram_abs >> TARGET_PAGE_BITS, ms->sentmap);
-                }
-            }
+        if (found) {
+            pages = ram_save_host_page(ms, f, pss.block, &pss.offset,
+                                       last_stage, bytes_transferred,
+                                       dirty_ram_abs);
         }
     } while (!pages && again);
 
diff --git a/trace-events b/trace-events
index e40f00e..9e4206b 100644
--- a/trace-events
+++ b/trace-events
@@ -1244,6 +1244,8 @@ vmstate_subsection_load_good(const char *parent) "%s"
 qemu_file_fclose(void) ""
 
 # migration/ram.c
+get_queued_page(const char *block_name, uint64_t tmp_offset, uint64_t ram_addr) "%s/%" PRIx64 " ram_addr=%" PRIx64
+get_queued_page_not_dirty(const char *block_name, uint64_t tmp_offset, uint64_t ram_addr, int sent) "%s/%" PRIx64 " ram_addr=%" PRIx64 " (sent=%d)"
 migration_bitmap_sync_start(void) ""
 migration_bitmap_sync_end(uint64_t dirty_pages) "dirty_pages %" PRIu64""
 migration_throttle(void) ""
-- 
2.5.0

  parent reply	other threads:[~2015-09-29  8:39 UTC|newest]

Thread overview: 118+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-29  8:37 [Qemu-devel] [PATCH v8 00/54] Postcopy implementation Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 01/54] Add postcopy documentation Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 02/54] Provide runtime Target page information Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 03/54] Init page sizes in qtest Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 04/54] Move configuration section writing Dr. David Alan Gilbert (git)
2015-10-05  6:44   ` Amit Shah
2015-10-30 12:47     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 05/54] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 06/54] Rename mis->file to from_src_file Dr. David Alan Gilbert (git)
2015-09-29 10:41   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 07/54] Add qemu_get_buffer_in_place to avoid copies some of the time Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 08/54] Add wrapper for setting blocking status on a QEMUFile Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 09/54] Add QEMU_MADV_NOHUGEPAGE Dr. David Alan Gilbert (git)
2015-10-28 10:35   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 10/54] migration/ram.c: Use RAMBlock rather than MemoryRegion Dr. David Alan Gilbert (git)
2015-10-28 10:36   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 11/54] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 12/54] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 13/54] Move dirty page search state into separate structure Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 14/54] ram_find_and_save_block: Split out the finding Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 15/54] Rename save_live_complete to save_live_complete_precopy Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 16/54] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2015-10-02 15:29   ` Daniel P. Berrange
2015-10-02 16:32     ` Dr. David Alan Gilbert
2015-10-02 17:03       ` Daniel P. Berrange
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 17/54] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 18/54] Migration commands Dr. David Alan Gilbert (git)
2015-10-20 11:22   ` Juan Quintela
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 19/54] Return path: Control commands Dr. David Alan Gilbert (git)
2015-10-20 11:27   ` Juan Quintela
2015-10-26 11:42     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 20/54] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 21/54] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2015-10-20 11:33   ` Juan Quintela
2015-10-26 12:06     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 22/54] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 23/54] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2015-09-29 20:22   ` Eric Blake
2015-09-30  7:00     ` Amit Shah
2015-09-30 12:44       ` Eric Blake
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 24/54] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2015-10-20 11:50   ` Juan Quintela
2015-10-26 12:22     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 25/54] MIG_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2015-10-20 13:25   ` Juan Quintela
2015-10-26 16:21     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 26/54] Modify save_live_pending for postcopy Dr. David Alan Gilbert (git)
2015-10-28 11:03   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 27/54] postcopy: OS support test Dr. David Alan Gilbert (git)
2015-10-20 13:31   ` Juan Quintela
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 28/54] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2015-09-30 16:25   ` Eric Blake
2015-09-30 16:30     ` Dr. David Alan Gilbert
2015-10-20 13:33   ` Juan Quintela
2015-10-28 11:17   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 29/54] MIGRATION_STATUS_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2015-10-20 13:35   ` Juan Quintela
2015-10-30 18:19     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 30/54] Avoid sending vmdescription during postcopy Dr. David Alan Gilbert (git)
2015-10-20 13:35   ` Juan Quintela
2015-10-28 11:19   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 31/54] Add qemu_savevm_state_complete_postcopy Dr. David Alan Gilbert (git)
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 32/54] Postcopy: Maintain sentmap and calculate discard Dr. David Alan Gilbert (git)
2015-10-21 11:17   ` Juan Quintela
2015-10-30 18:43     ` Dr. David Alan Gilbert
2015-11-02 17:31     ` Dr. David Alan Gilbert
2015-11-02 18:19     ` Dr. David Alan Gilbert
2015-11-02 20:14     ` Dr. David Alan Gilbert
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 33/54] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2015-10-21  8:35   ` Juan Quintela
2015-11-03 17:59     ` Dr. David Alan Gilbert
2015-11-03 18:32       ` Juan Quintela
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 34/54] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2015-10-28 11:40   ` Amit Shah
2015-09-29  8:37 ` [Qemu-devel] [PATCH v8 35/54] Postcopy: Postcopy startup in migration thread Dr. David Alan Gilbert (git)
2015-10-21  8:57   ` Juan Quintela
2015-10-26 17:12     ` Dr. David Alan Gilbert
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 36/54] Split out end of migration code from migration_thread Dr. David Alan Gilbert (git)
2015-10-21  9:11   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 37/54] Postcopy: End of iteration Dr. David Alan Gilbert (git)
2015-10-21  9:16   ` Juan Quintela
2015-10-29  5:10   ` Amit Shah
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 38/54] Page request: Add MIG_RP_MSG_REQ_PAGES reverse command Dr. David Alan Gilbert (git)
2015-10-21 11:12   ` Juan Quintela
2015-10-26 16:58     ` Dr. David Alan Gilbert
2015-10-29  5:17   ` Amit Shah
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 39/54] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2015-10-21 11:17   ` Juan Quintela
2015-09-29  8:38 ` Dr. David Alan Gilbert (git) [this message]
2015-10-26 16:32   ` [Qemu-devel] [PATCH v8 40/54] Page request: Consume pages off the post-copy queue Juan Quintela
2015-11-03 11:52     ` Dr. David Alan Gilbert
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 41/54] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2015-10-28 10:28   ` Juan Quintela
2015-10-28 13:11     ` Dr. David Alan Gilbert
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 42/54] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2015-10-28 10:58   ` Juan Quintela
2015-10-30 12:59     ` Dr. David Alan Gilbert
2015-10-30 16:35     ` Dr. David Alan Gilbert
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 43/54] Don't sync dirty bitmaps in postcopy Dr. David Alan Gilbert (git)
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 44/54] Don't iterate on precopy-only devices during postcopy Dr. David Alan Gilbert (git)
2015-10-28 11:01   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 45/54] Host page!=target page: Cleanup bitmaps Dr. David Alan Gilbert (git)
2015-10-28 11:24   ` Juan Quintela
2015-11-03 17:32     ` Dr. David Alan Gilbert
2015-11-03 18:30       ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 46/54] postcopy: Check order of received target pages Dr. David Alan Gilbert (git)
2015-10-28 11:26   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 47/54] Round up RAMBlock sizes to host page sizes Dr. David Alan Gilbert (git)
2015-10-28 11:28   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 48/54] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 49/54] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 50/54] postcopy: Wire up loadvm_postcopy_handle_ commands Dr. David Alan Gilbert (git)
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 51/54] Postcopy: Mark nohugepage before discard Dr. David Alan Gilbert (git)
2015-10-28 14:02   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 52/54] End of migration for postcopy Dr. David Alan Gilbert (git)
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 53/54] Disable mlock around incoming postcopy Dr. David Alan Gilbert (git)
2015-10-21  9:17   ` Juan Quintela
2015-09-29  8:38 ` [Qemu-devel] [PATCH v8 54/54] Inhibit ballooning during postcopy Dr. David Alan Gilbert (git)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443515898-3594-41-git-send-email-dgilbert@redhat.com \
    --to=dgilbert@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=amit.shah@redhat.com \
    --cc=bharata@linux.vnet.ibm.com \
    --cc=liang.z.li@intel.com \
    --cc=luis@cs.umu.se \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).