* [Qemu-devel] [PATCH V9 1/3] sd.h: Move sd.h to include/hw/sd/
2015-09-29 13:28 [Qemu-devel] [PATCH V9 0/3] Move sdhci.h to include/hw/sd Sai Pavan Boddu
@ 2015-09-29 13:28 ` Sai Pavan Boddu
2015-09-29 13:28 ` [Qemu-devel] [PATCH V9 2/3] sdhci: Split sdhci.h for public and internal device usage Sai Pavan Boddu
1 sibling, 0 replies; 3+ messages in thread
From: Sai Pavan Boddu @ 2015-09-29 13:28 UTC (permalink / raw)
To: qemu-devel, peter.maydell, crosthwaitepeter, alistai
Cc: Sai Pavan Boddu, edgari
Create a sd directory under include/hw/ and move sd.h to same.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
Changes for V9:
None.
Changes for V8:
None
Changes for V7:
None
Changes for V6:
Fix commit message.
Changes for V5:
None
Changes for V4:
Fix commit message.
Changes for V3:
None.
---
hw/sd/milkymist-memcard.c | 2 +-
hw/sd/omap_mmc.c | 2 +-
hw/sd/pl181.c | 2 +-
hw/sd/pxa2xx_mmci.c | 2 +-
hw/sd/sd.c | 2 +-
hw/sd/sdhci.h | 2 +-
hw/sd/ssi-sd.c | 2 +-
include/hw/{ => sd}/sd.h | 0
8 files changed, 7 insertions(+), 7 deletions(-)
rename include/hw/{ => sd}/sd.h (100%)
diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index 2209ef1..b430d56 100644
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -28,7 +28,7 @@
#include "qemu/error-report.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
enum {
ENABLE_CMD_TX = (1<<0),
diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index 35d8033..5bc4719 100644
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -18,7 +18,7 @@
*/
#include "hw/hw.h"
#include "hw/arm/omap.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
struct omap_mmc_s {
qemu_irq irq;
diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index 5242176..326c53a 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -10,7 +10,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
#include "hw/sysbus.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
//#define DEBUG_PL181 1
diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index d1fe6d5..b217080 100644
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -12,7 +12,7 @@
#include "hw/hw.h"
#include "hw/arm/pxa.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
#include "hw/qdev.h"
struct PXA2xxMMCIState {
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 3e2a451..06f56d5 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -31,7 +31,7 @@
#include "hw/hw.h"
#include "sysemu/block-backend.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
#include "qemu/bitmap.h"
//#define DEBUG_SD 1
diff --git a/hw/sd/sdhci.h b/hw/sd/sdhci.h
index 3352d23..a45593f 100644
--- a/hw/sd/sdhci.h
+++ b/hw/sd/sdhci.h
@@ -28,7 +28,7 @@
#include "qemu-common.h"
#include "hw/pci/pci.h"
#include "hw/sysbus.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
/* R/W SDMA System Address register 0x0 */
#define SDHC_SYSAD 0x00
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index e4b2d4f..c49ff62 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -13,7 +13,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
#include "hw/ssi.h"
-#include "hw/sd.h"
+#include "hw/sd/sd.h"
//#define DEBUG_SSI_SD 1
diff --git a/include/hw/sd.h b/include/hw/sd/sd.h
similarity index 100%
rename from include/hw/sd.h
rename to include/hw/sd/sd.h
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [Qemu-devel] [PATCH V9 2/3] sdhci: Split sdhci.h for public and internal device usage
2015-09-29 13:28 [Qemu-devel] [PATCH V9 0/3] Move sdhci.h to include/hw/sd Sai Pavan Boddu
2015-09-29 13:28 ` [Qemu-devel] [PATCH V9 1/3] sd.h: Move sd.h to include/hw/sd/ Sai Pavan Boddu
@ 2015-09-29 13:28 ` Sai Pavan Boddu
1 sibling, 0 replies; 3+ messages in thread
From: Sai Pavan Boddu @ 2015-09-29 13:28 UTC (permalink / raw)
To: qemu-devel, peter.maydell, crosthwaitepeter, alistai
Cc: Sai Pavan Boddu, edgari
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and
internal version (i.e hw/sd/sdhci-interna.h) based on register
declarations and object declaration.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
Changes for V9:
None
Changes for V8:
Fix header file duplication macros form SDHCI_COMMON to SDHI
Changes for V7:
Fix Commit message.
Changes for V6:
Fix commit message.
Chages for V5:
Rename pubilc header version as sdhci.h and internal version to
sdhci-internal.h
Changes for V4:
Remain the name of internal version of sdchi.h as same. And change
Re-Adding qemu-common.h header.
the one which is in includes/ to sdhci-common.h
Changes for V2:
Create new area in includes for sd. And move sdhci.h to same.
Changes for V3:
Split the headers to public and common.
---
hw/sd/{sdhci.h => sdhci-internal.h} | 71 ++--------------------------
hw/sd/sdhci.c | 3 +-
include/hw/sd/sdhci.h | 92 +++++++++++++++++++++++++++++++++++++
3 files changed, 97 insertions(+), 69 deletions(-)
rename hw/sd/{sdhci.h => sdhci-internal.h} (75%)
create mode 100644 include/hw/sd/sdhci.h
diff --git a/hw/sd/sdhci.h b/hw/sd/sdhci-internal.h
similarity index 75%
rename from hw/sd/sdhci.h
rename to hw/sd/sdhci-internal.h
index a45593f..c712daf 100644
--- a/hw/sd/sdhci.h
+++ b/hw/sd/sdhci-internal.h
@@ -21,14 +21,10 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
+#ifndef SDHCI_INTERNAL_H
+#define SDHCI_INTERNAL_H
-#ifndef SDHCI_H
-#define SDHCI_H
-
-#include "qemu-common.h"
-#include "hw/pci/pci.h"
-#include "hw/sysbus.h"
-#include "hw/sd/sd.h"
+#include "hw/sd/sdhci.h"
/* R/W SDMA System Address register 0x0 */
#define SDHC_SYSAD 0x00
@@ -231,65 +227,6 @@ enum {
sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */
};
-/* SD/MMC host controller state */
-typedef struct SDHCIState {
- union {
- PCIDevice pcidev;
- SysBusDevice busdev;
- };
- SDState *card;
- MemoryRegion iomem;
-
- QEMUTimer *insert_timer; /* timer for 'changing' sd card. */
- QEMUTimer *transfer_timer;
- qemu_irq eject_cb;
- qemu_irq ro_cb;
- qemu_irq irq;
-
- uint32_t sdmasysad; /* SDMA System Address register */
- uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */
- uint16_t blkcnt; /* Blocks count for current transfer */
- uint32_t argument; /* Command Argument Register */
- uint16_t trnmod; /* Transfer Mode Setting Register */
- uint16_t cmdreg; /* Command Register */
- uint32_t rspreg[4]; /* Response Registers 0-3 */
- uint32_t prnsts; /* Present State Register */
- uint8_t hostctl; /* Host Control Register */
- uint8_t pwrcon; /* Power control Register */
- uint8_t blkgap; /* Block Gap Control Register */
- uint8_t wakcon; /* WakeUp Control Register */
- uint16_t clkcon; /* Clock control Register */
- uint8_t timeoutcon; /* Timeout Control Register */
- uint8_t admaerr; /* ADMA Error Status Register */
- uint16_t norintsts; /* Normal Interrupt Status Register */
- uint16_t errintsts; /* Error Interrupt Status Register */
- uint16_t norintstsen; /* Normal Interrupt Status Enable Register */
- uint16_t errintstsen; /* Error Interrupt Status Enable Register */
- uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */
- uint16_t errintsigen; /* Error Interrupt Signal Enable Register */
- uint16_t acmd12errsts; /* Auto CMD12 error status register */
- uint64_t admasysaddr; /* ADMA System Address Register */
-
- uint32_t capareg; /* Capabilities Register */
- uint32_t maxcurr; /* Maximum Current Capabilities Register */
- uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */
- uint32_t buf_maxsz;
- uint16_t data_count; /* current element in FIFO buffer */
- uint8_t stopped_state;/* Current SDHC state */
- /* Buffer Data Port Register - virtual access point to R and W buffers */
- /* Software Reset Register - always reads as 0 */
- /* Force Event Auto CMD12 Error Interrupt Reg - write only */
- /* Force Event Error Interrupt Register- write only */
- /* RO Host Controller Version Register always reads as 0x2401 */
-} SDHCIState;
-
extern const VMStateDescription sdhci_vmstate;
-#define TYPE_PCI_SDHCI "sdhci-pci"
-#define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI)
-
-#define TYPE_SYSBUS_SDHCI "generic-sdhci"
-#define SYSBUS_SDHCI(obj) \
- OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI)
-
-#endif /* SDHCI_H */
+#endif
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 8b0f9f0..5770408 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -29,8 +29,7 @@
#include "sysemu/dma.h"
#include "qemu/timer.h"
#include "qemu/bitops.h"
-
-#include "sdhci.h"
+#include "sdhci-internal.h"
/* host controller debug messages */
#ifndef SDHC_DEBUG
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
new file mode 100644
index 0000000..2411bea
--- /dev/null
+++ b/include/hw/sd/sdhci.h
@@ -0,0 +1,92 @@
+/*
+ * SD Association Host Standard Specification v2.0 controller emulation
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Mitsyanko Igor <i.mitsyanko@samsung.com>
+ * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
+ *
+ * Based on MMC controller for Samsung S5PC1xx-based board emulation
+ * by Alexey Merkulov and Vladimir Monakhov.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU _General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SDHCI_H
+#define SDHCI_H
+
+#include "qemu-common.h"
+#include "hw/pci/pci.h"
+#include "hw/sysbus.h"
+#include "hw/sd/sd.h"
+
+/* SD/MMC host controller state */
+typedef struct SDHCIState {
+ union {
+ PCIDevice pcidev;
+ SysBusDevice busdev;
+ };
+ SDState *card;
+ MemoryRegion iomem;
+
+ QEMUTimer *insert_timer; /* timer for 'changing' sd card. */
+ QEMUTimer *transfer_timer;
+ qemu_irq eject_cb;
+ qemu_irq ro_cb;
+ qemu_irq irq;
+
+ uint32_t sdmasysad; /* SDMA System Address register */
+ uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */
+ uint16_t blkcnt; /* Blocks count for current transfer */
+ uint32_t argument; /* Command Argument Register */
+ uint16_t trnmod; /* Transfer Mode Setting Register */
+ uint16_t cmdreg; /* Command Register */
+ uint32_t rspreg[4]; /* Response Registers 0-3 */
+ uint32_t prnsts; /* Present State Register */
+ uint8_t hostctl; /* Host Control Register */
+ uint8_t pwrcon; /* Power control Register */
+ uint8_t blkgap; /* Block Gap Control Register */
+ uint8_t wakcon; /* WakeUp Control Register */
+ uint16_t clkcon; /* Clock control Register */
+ uint8_t timeoutcon; /* Timeout Control Register */
+ uint8_t admaerr; /* ADMA Error Status Register */
+ uint16_t norintsts; /* Normal Interrupt Status Register */
+ uint16_t errintsts; /* Error Interrupt Status Register */
+ uint16_t norintstsen; /* Normal Interrupt Status Enable Register */
+ uint16_t errintstsen; /* Error Interrupt Status Enable Register */
+ uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */
+ uint16_t errintsigen; /* Error Interrupt Signal Enable Register */
+ uint16_t acmd12errsts; /* Auto CMD12 error status register */
+ uint64_t admasysaddr; /* ADMA System Address Register */
+
+ uint32_t capareg; /* Capabilities Register */
+ uint32_t maxcurr; /* Maximum Current Capabilities Register */
+ uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */
+ uint32_t buf_maxsz;
+ uint16_t data_count; /* current element in FIFO buffer */
+ uint8_t stopped_state;/* Current SDHC state */
+ /* Buffer Data Port Register - virtual access point to R and W buffers */
+ /* Software Reset Register - always reads as 0 */
+ /* Force Event Auto CMD12 Error Interrupt Reg - write only */
+ /* Force Event Error Interrupt Register- write only */
+ /* RO Host Controller Version Register always reads as 0x2401 */
+} SDHCIState;
+
+#define TYPE_PCI_SDHCI "sdhci-pci"
+#define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI)
+
+#define TYPE_SYSBUS_SDHCI "generic-sdhci"
+#define SYSBUS_SDHCI(obj) \
+ OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI)
+
+#endif /* SDHCI_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread