qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 25/26] tcg: Check for overflow via highwater mark
Date: Wed,  7 Oct 2015 20:43:50 +1100	[thread overview]
Message-ID: <1444211031-11624-26-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1444211031-11624-1-git-send-email-rth@twiddle.net>

We currently pre-compute an worst case code size for any TB, which
works out to be 122kB.  Since the average TB size is near 1kB, this
wastes quite a lot of storage.

Instead, check for overflow in between generating code for each opcode.
The overhead of the check isn't measurable and wastage is minimized.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 include/exec/exec-all.h |  6 ------
 tcg/tcg.c               | 14 +++++++++++---
 tcg/tcg.h               |  5 +++--
 translate-all.c         | 31 ++++++++++++++++++++++++++-----
 4 files changed, 40 insertions(+), 16 deletions(-)

diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index 6871e78..71c9d85 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -62,12 +62,6 @@ typedef struct TranslationBlock TranslationBlock;
 #define OPC_BUF_SIZE 640
 #define OPC_MAX_SIZE (OPC_BUF_SIZE - MAX_OP_PER_INSTR)
 
-/* Maximum size a TCG op can expand to.  This is complicated because a
-   single op may require several host instructions and register reloads.
-   For now take a wild guess at 192 bytes, which should allow at least
-   a couple of fixup instructions per argument.  */
-#define TCG_MAX_OP_SIZE 192
-
 #define OPPARAM_BUF_SIZE (OPC_BUF_SIZE * MAX_OPC_PARAM)
 
 #include "qemu/log.h"
diff --git a/tcg/tcg.c b/tcg/tcg.c
index 5609108..682af8a 100644
--- a/tcg/tcg.c
+++ b/tcg/tcg.c
@@ -385,9 +385,10 @@ void tcg_prologue_init(TCGContext *s)
     total_size = s->code_gen_buffer_size - prologue_size;
     s->code_gen_buffer_size = total_size;
 
-    /* Compute a high-water mark, at which we voluntarily flush the
-       buffer and start over.  */
-    s->code_gen_buffer_max_size = total_size - TCG_MAX_OP_SIZE * OPC_BUF_SIZE;
+    /* Compute a high-water mark, at which we voluntarily flush the buffer
+       and start over.  The size here is arbitrary, significantly larger
+       than we expect the code generation for any one opcode to require.  */
+    s->code_gen_highwater = s->code_gen_buffer + (total_size - 1024);
 
     tcg_register_jit(s->code_gen_buffer, total_size);
 
@@ -2438,6 +2439,13 @@ int tcg_gen_code(TCGContext *s, tcg_insn_unit *gen_code_buf)
 #ifndef NDEBUG
         check_regs(s);
 #endif
+        /* Test for (pending) buffer overflow.  The assumption is that any
+           one operation beginning below the high water mark cannot overrun
+           the buffer completely.  Thus we can test for overflow after
+           generating code without having to check during generation.  */
+        if (unlikely(s->code_gen_ptr > s->code_gen_highwater)) {
+            return -1;
+        }
     }
     tcg_debug_assert(num_insns >= 0);
     s->gen_insn_end_off[num_insns] = tcg_current_code_size(s);
diff --git a/tcg/tcg.h b/tcg/tcg.h
index 5fbbd15..a696922 100644
--- a/tcg/tcg.h
+++ b/tcg/tcg.h
@@ -559,10 +559,11 @@ struct TCGContext {
     void *code_gen_prologue;
     void *code_gen_buffer;
     size_t code_gen_buffer_size;
-    /* threshold to flush the translated code buffer */
-    size_t code_gen_buffer_max_size;
     void *code_gen_ptr;
 
+    /* Threshold to flush the translated code buffer.  */
+    void *code_gen_highwater;
+
     TBContext tb_ctx;
 
     /* The TCGBackendData structure is private to tcg-target.c.  */
diff --git a/translate-all.c b/translate-all.c
index b43bd03..333eba4 100644
--- a/translate-all.c
+++ b/translate-all.c
@@ -223,6 +223,7 @@ static target_long decode_sleb128(uint8_t **pp)
 
 static int encode_search(TranslationBlock *tb, uint8_t *block)
 {
+    uint8_t *highwater = tcg_ctx.code_gen_highwater;
     uint8_t *p = block;
     int i, j, n;
 
@@ -241,6 +242,14 @@ static int encode_search(TranslationBlock *tb, uint8_t *block)
         }
         prev = (i == 0 ? 0 : tcg_ctx.gen_insn_end_off[i - 1]);
         p = encode_sleb128(p, tcg_ctx.gen_insn_end_off[i] - prev);
+
+        /* Test for (pending) buffer overflow.  The assumption is that any
+           one row beginning below the high water mark cannot overrun
+           the buffer completely.  Thus we can test for overflow after
+           encoding a row without having to check during encoding.  */
+        if (unlikely(p > highwater)) {
+            return -1;
+        }
     }
 
     return p - block;
@@ -756,9 +765,7 @@ static TranslationBlock *tb_alloc(target_ulong pc)
 {
     TranslationBlock *tb;
 
-    if (tcg_ctx.tb_ctx.nb_tbs >= tcg_ctx.code_gen_max_blocks ||
-        (tcg_ctx.code_gen_ptr - tcg_ctx.code_gen_buffer) >=
-         tcg_ctx.code_gen_buffer_max_size) {
+    if (tcg_ctx.tb_ctx.nb_tbs >= tcg_ctx.code_gen_max_blocks) {
         return NULL;
     }
     tb = &tcg_ctx.tb_ctx.tbs[tcg_ctx.tb_ctx.nb_tbs++];
@@ -1063,12 +1070,15 @@ TranslationBlock *tb_gen_code(CPUState *cpu,
     if (use_icount) {
         cflags |= CF_USE_ICOUNT;
     }
+
     tb = tb_alloc(pc);
-    if (!tb) {
+    if (unlikely(!tb)) {
+ buffer_overflow:
         /* flush must be done */
         tb_flush(cpu);
         /* cannot fail at this point */
         tb = tb_alloc(pc);
+        assert(tb != NULL);
         /* Don't forget to invalidate previous TB info.  */
         tcg_ctx.tb_ctx.tb_invalidated_flag = 1;
     }
@@ -1109,8 +1119,19 @@ TranslationBlock *tb_gen_code(CPUState *cpu,
     tcg_ctx.code_time -= profile_getclock();
 #endif
 
+    /* ??? Overflow could be handled better here.  In particular, we
+       don't need to re-do gen_intermediate_code, nor should we re-do
+       the tcg optimization currently hidden inside tcg_gen_code.  All
+       that should be required is to flush the TBs, allocate a new TB,
+       re-initialize it per above, and re-do the actual code generation.  */
     gen_code_size = tcg_gen_code(&tcg_ctx, gen_code_buf);
+    if (unlikely(gen_code_size < 0)) {
+        goto buffer_overflow;
+    }
     search_size = encode_search(tb, (void *)gen_code_buf + gen_code_size);
+    if (unlikely(search_size < 0)) {
+        goto buffer_overflow;
+    }
 
 #ifdef CONFIG_PROFILER
     tcg_ctx.code_time += profile_getclock();
@@ -1681,7 +1702,7 @@ void dump_exec_info(FILE *f, fprintf_function cpu_fprintf)
     cpu_fprintf(f, "Translation buffer state:\n");
     cpu_fprintf(f, "gen code size       %td/%zd\n",
                 tcg_ctx.code_gen_ptr - tcg_ctx.code_gen_buffer,
-                tcg_ctx.code_gen_buffer_max_size);
+                tcg_ctx.code_gen_highwater - tcg_ctx.code_gen_buffer);
     cpu_fprintf(f, "TB count            %d/%d\n",
             tcg_ctx.tb_ctx.nb_tbs, tcg_ctx.code_gen_max_blocks);
     cpu_fprintf(f, "TB avg target size  %d max=%d bytes\n",
-- 
2.4.3

  parent reply	other threads:[~2015-10-07  9:45 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-07  9:43 [Qemu-devel] [PULL 00/26] Do away with TB retranslation Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 01/26] tcg: Rename debug_insn_start to insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 02/26] target-*: Unconditionally emit tcg_gen_insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 03/26] target-*: Increment num_insns immediately after tcg_gen_insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 04/26] target-*: Introduce and use cpu_breakpoint_test Richard Henderson
2015-10-09 13:34   ` Sergey Fedorov
2015-10-13  0:13     ` Richard Henderson
2015-10-13  8:13       ` Peter Maydell
2015-10-13 13:40       ` Sergey Fedorov
2015-10-13 20:44         ` Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 05/26] tcg: Allow extra data to be attached to insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 06/26] target-arm: Add condexec state " Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 07/26] target-i386: Add cc_op " Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 08/26] target-mips: Add delayed branch " Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 09/26] target-s390x: Add cc_op " Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 10/26] target-sh4: Add flags " Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 11/26] target-cris: Mirror gen_opc_pc into insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 12/26] target-sparc: Tidy gen_branch_a interface Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 13/26] target-sparc: Split out gen_branch_n Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 14/26] target-sparc: Remove gen_opc_jump_pc Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 15/26] target-sparc: Add npc state to insn_start Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 16/26] tcg: Merge cpu_gen_code into tb_gen_code Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 17/26] target-*: Drop cpu_gen_code define Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 18/26] tcg: Add TCG_MAX_INSNS Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 19/26] tcg: Pass data argument to restore_state_to_opc Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 20/26] tcg: Save insn data and use it in cpu_restore_state_from_tb Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 21/26] tcg: Remove gen_intermediate_code_pc Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 22/26] tcg: Remove tcg_gen_code_search_pc Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 23/26] tcg: Emit prologue to the beginning of code_gen_buffer Richard Henderson
2015-10-07  9:43 ` [Qemu-devel] [PULL 24/26] tcg: Allocate a guard page after code_gen_buffer Richard Henderson
2015-10-07  9:43 ` Richard Henderson [this message]
2015-10-07  9:43 ` [Qemu-devel] [PULL 26/26] tcg: Adjust CODE_GEN_AVG_BLOCK_SIZE Richard Henderson
2015-10-08 15:50 ` [Qemu-devel] [PULL 00/26] Do away with TB retranslation Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444211031-11624-26-git-send-email-rth@twiddle.net \
    --to=rth@twiddle.net \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).