From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Alberto Garcia <berto@igalia.com>,
Markus Armbruster <armbru@redhat.com>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v6 24/39] blockdev: Do not create BDS for empty drive
Date: Mon, 12 Oct 2015 22:00:27 +0200 [thread overview]
Message-ID: <1444680042-13207-25-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1444680042-13207-1-git-send-email-mreitz@redhat.com>
Do not use "rudimentary" BDSs for empty drives any longer (for
freshly created drives).
After a follow-up patch, empty drives will generally use a NULL BDS, not
only the freshly created drives.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
blockdev.c | 72 ++++++++++++++++++++++++++++++++++++++------------------------
1 file changed, 44 insertions(+), 28 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index 35efe84..845a1c1 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -514,16 +514,44 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
goto early_err;
}
+ if (snapshot) {
+ /* always use cache=unsafe with snapshot */
+ bdrv_flags &= ~BDRV_O_CACHE_MASK;
+ bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
+ }
+
+ if (copy_on_read) {
+ bdrv_flags |= BDRV_O_COPY_ON_READ;
+ }
+
+ if (runstate_check(RUN_STATE_INMIGRATE)) {
+ bdrv_flags |= BDRV_O_INCOMING;
+ }
+
+ bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
+
/* init */
if ((!file || !*file) && !has_driver_specific_opts) {
- blk = blk_new_with_bs(qemu_opts_id(opts), errp);
+ BlockBackendRootState *blk_rs;
+
+ blk = blk_new(qemu_opts_id(opts), errp);
if (!blk) {
goto early_err;
}
- bs = blk_bs(blk);
- bs->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
- bs->read_only = ro;
+ blk_rs = blk_get_root_state(blk);
+ blk_rs->open_flags = bdrv_flags;
+ blk_rs->read_only = ro;
+ blk_rs->detect_zeroes = detect_zeroes;
+
+ if (throttle_enabled(&cfg)) {
+ if (!throttling_group) {
+ throttling_group = blk_name(blk);
+ }
+ blk_rs->throttle_group = g_strdup(throttling_group);
+ blk_rs->throttle_state = throttle_group_incref(throttling_group);
+ blk_rs->throttle_state->cfg = cfg;
+ }
QDECREF(bs_opts);
} else {
@@ -531,42 +559,30 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
file = NULL;
}
- if (snapshot) {
- /* always use cache=unsafe with snapshot */
- bdrv_flags &= ~BDRV_O_CACHE_MASK;
- bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
- }
-
- if (copy_on_read) {
- bdrv_flags |= BDRV_O_COPY_ON_READ;
- }
-
- bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
-
blk = blk_new_open(qemu_opts_id(opts), file, NULL, bs_opts, bdrv_flags,
errp);
if (!blk) {
goto err_no_bs_opts;
}
bs = blk_bs(blk);
- }
- bs->detect_zeroes = detect_zeroes;
+ bs->detect_zeroes = detect_zeroes;
- blk_set_on_error(blk, on_read_error, on_write_error);
+ /* disk I/O throttling */
+ if (throttle_enabled(&cfg)) {
+ if (!throttling_group) {
+ throttling_group = blk_name(blk);
+ }
+ bdrv_io_limits_enable(bs, throttling_group);
+ bdrv_set_io_limits(bs, &cfg);
+ }
- /* disk I/O throttling */
- if (throttle_enabled(&cfg)) {
- if (!throttling_group) {
- throttling_group = blk_name(blk);
+ if (bdrv_key_required(bs)) {
+ autostart = 0;
}
- bdrv_io_limits_enable(bs, throttling_group);
- bdrv_set_io_limits(bs, &cfg);
}
- if (bdrv_key_required(bs)) {
- autostart = 0;
- }
+ blk_set_on_error(blk, on_read_error, on_write_error);
err_no_bs_opts:
qemu_opts_del(opts);
--
2.6.1
next prev parent reply other threads:[~2015-10-12 20:02 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 20:00 [Qemu-devel] [PATCH v6 00/39] blockdev: BlockBackend and media Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 01/39] block: Remove host floppy support Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 02/39] block: Set BDRV_O_INCOMING in bdrv_fill_options() Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 03/39] blockdev: Allow creation of BDS trees without BB Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 04/39] iotests: Only create BB if necessary Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 05/39] block: Make bdrv_is_inserted() return a bool Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 06/39] block: Add blk_is_available() Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 07/39] block: Make bdrv_is_inserted() recursive Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 08/39] block/raw_bsd: Drop raw_is_inserted() Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 09/39] block: Invoke change media CB before NULLing drv Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 10/39] hw/block/fdc: Implement tray status Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 11/39] hw/usb-storage: Check whether BB is inserted Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 12/39] block: Fix BB AIOCB AioContext without BDS Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 13/39] block: Move guest_block_size into BlockBackend Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 14/39] block: Remove wr_highest_sector from BlockAcctStats Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 15/39] block: Move BlockAcctStats into BlockBackend Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 16/39] block: Move I/O status and error actions into BB Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 17/39] block/throttle-groups: Make incref/decref public Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 18/39] block: Add BlockBackendRootState Max Reitz
2015-10-19 14:18 ` Kevin Wolf
2015-10-19 14:32 ` Max Reitz
2015-10-19 14:42 ` Kevin Wolf
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 19/39] block: Make some BB functions fall back to BBRS Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 20/39] block: Fail requests to empty BlockBackend Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 21/39] block: Prepare remaining BB functions for NULL BDS Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 22/39] block: Add blk_insert_bs() Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 23/39] block: Prepare for NULL BDS Max Reitz
2015-10-13 15:37 ` Kevin Wolf
2015-10-14 15:06 ` Max Reitz
2015-10-12 20:00 ` Max Reitz [this message]
2015-10-14 13:27 ` [Qemu-devel] [PATCH v6 24/39] blockdev: Do not create BDS for empty drive Kevin Wolf
2015-10-14 15:13 ` Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 25/39] blockdev: Pull out blockdev option extraction Max Reitz
2015-10-14 15:12 ` Kevin Wolf
2015-10-14 15:16 ` Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 26/39] blockdev: Allow more options for BB-less BDS tree Max Reitz
2015-10-15 11:29 ` Kevin Wolf
2015-10-17 16:33 ` Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 27/39] block: Add blk_remove_bs() Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 28/39] blockdev: Add blockdev-open-tray Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 29/39] blockdev: Add blockdev-close-tray Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 30/39] blockdev: Add blockdev-remove-medium Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 31/39] blockdev: Add blockdev-insert-medium Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 32/39] blockdev: Implement eject with basic operations Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 33/39] blockdev: Implement change " Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 34/39] block: Inquire tray state before tray-moved events Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 35/39] qmp: Introduce blockdev-change-medium Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 36/39] hmp: Use blockdev-change-medium for change command Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 37/39] blockdev: read-only-mode for blockdev-change-medium Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 38/39] hmp: Add read-only-mode option to change command Max Reitz
2015-10-12 20:00 ` [Qemu-devel] [PATCH v6 39/39] iotests: Add test for change-related QMP commands Max Reitz
2015-10-13 15:38 ` [Qemu-devel] [PATCH v6 00/39] blockdev: BlockBackend and media Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444680042-13207-25-git-send-email-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=armbru@redhat.com \
--cc=berto@igalia.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).