From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Thomas Huth <thuth@redhat.com>
Subject: [Qemu-devel] [PULL 48/49] kvm: Move x86-specific functions into target-i386/kvm.c
Date: Fri, 16 Oct 2015 10:50:10 +0200 [thread overview]
Message-ID: <1444985411-17803-49-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1444985411-17803-1-git-send-email-pbonzini@redhat.com>
From: Thomas Huth <thuth@redhat.com>
The functions for checking xcrs, xsave and pit_state2 are
only used on x86, so they should reside in target-i386/kvm.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1444933820-6968-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/sysemu/kvm.h | 2 --
kvm-all.c | 29 -----------------------------
kvm-stub.c | 5 -----
target-i386/kvm.c | 31 ++++++++++++++++++++++++++-----
4 files changed, 26 insertions(+), 41 deletions(-)
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 24657d8..461ef65 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -191,8 +191,6 @@ int kvm_has_sync_mmu(void);
int kvm_has_vcpu_events(void);
int kvm_has_robust_singlestep(void);
int kvm_has_debugregs(void);
-int kvm_has_xsave(void);
-int kvm_has_xcrs(void);
int kvm_has_pit_state2(void);
int kvm_has_many_ioeventfds(void);
int kvm_has_gsi_routing(void);
diff --git a/kvm-all.c b/kvm-all.c
index ab50a16..c442838 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -77,8 +77,6 @@ struct KVMState
#ifdef KVM_CAP_SET_GUEST_DEBUG
struct kvm_sw_breakpoint_head kvm_sw_breakpoints;
#endif
- int pit_state2;
- int xsave, xcrs;
int many_ioeventfds;
int intx_set_mask;
/* The man page (and posix) say ioctl numbers are signed int, but
@@ -1586,18 +1584,6 @@ static int kvm_init(MachineState *ms)
s->debugregs = kvm_check_extension(s, KVM_CAP_DEBUGREGS);
#endif
-#ifdef KVM_CAP_XSAVE
- s->xsave = kvm_check_extension(s, KVM_CAP_XSAVE);
-#endif
-
-#ifdef KVM_CAP_XCRS
- s->xcrs = kvm_check_extension(s, KVM_CAP_XCRS);
-#endif
-
-#ifdef KVM_CAP_PIT_STATE2
- s->pit_state2 = kvm_check_extension(s, KVM_CAP_PIT_STATE2);
-#endif
-
#ifdef KVM_CAP_IRQ_ROUTING
kvm_direct_msi_allowed = (kvm_check_extension(s, KVM_CAP_SIGNAL_MSI) > 0);
#endif
@@ -2063,21 +2049,6 @@ int kvm_has_debugregs(void)
return kvm_state->debugregs;
}
-int kvm_has_xsave(void)
-{
- return kvm_state->xsave;
-}
-
-int kvm_has_xcrs(void)
-{
- return kvm_state->xcrs;
-}
-
-int kvm_has_pit_state2(void)
-{
- return kvm_state->pit_state2;
-}
-
int kvm_has_many_ioeventfds(void)
{
if (!kvm_enabled()) {
diff --git a/kvm-stub.c b/kvm-stub.c
index 08bcc32..a5051f7 100644
--- a/kvm-stub.c
+++ b/kvm-stub.c
@@ -67,11 +67,6 @@ int kvm_has_many_ioeventfds(void)
return 0;
}
-int kvm_has_pit_state2(void)
-{
- return 0;
-}
-
void kvm_setup_guest_memory(void *start, size_t size)
{
}
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index ee5bef9..010ac51 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -91,6 +91,15 @@ static bool has_msr_xss;
static bool has_msr_architectural_pmu;
static uint32_t num_architectural_pmu_counters;
+static int has_xsave;
+static int has_xcrs;
+static int has_pit_state2;
+
+int kvm_has_pit_state2(void)
+{
+ return has_pit_state2;
+}
+
bool kvm_has_smm(void)
{
return kvm_check_extension(kvm_state, KVM_CAP_X86_SMM);
@@ -766,7 +775,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
}
}
- if (kvm_has_xsave()) {
+ if (has_xsave) {
env->kvm_xsave_buf = qemu_memalign(4096, sizeof(struct kvm_xsave));
}
@@ -934,6 +943,18 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
int ret;
struct utsname utsname;
+#ifdef KVM_CAP_XSAVE
+ has_xsave = kvm_check_extension(s, KVM_CAP_XSAVE);
+#endif
+
+#ifdef KVM_CAP_XCRS
+ has_xcrs = kvm_check_extension(s, KVM_CAP_XCRS);
+#endif
+
+#ifdef KVM_CAP_PIT_STATE2
+ has_pit_state2 = kvm_check_extension(s, KVM_CAP_PIT_STATE2);
+#endif
+
ret = kvm_get_supported_msrs(s);
if (ret < 0) {
return ret;
@@ -1142,7 +1163,7 @@ static int kvm_put_xsave(X86CPU *cpu)
uint8_t *xmm, *ymmh, *zmmh;
int i, r;
- if (!kvm_has_xsave()) {
+ if (!has_xsave) {
return kvm_put_fpu(cpu);
}
@@ -1196,7 +1217,7 @@ static int kvm_put_xcrs(X86CPU *cpu)
CPUX86State *env = &cpu->env;
struct kvm_xcrs xcrs = {};
- if (!kvm_has_xcrs()) {
+ if (!has_xcrs) {
return 0;
}
@@ -1525,7 +1546,7 @@ static int kvm_get_xsave(X86CPU *cpu)
const uint8_t *xmm, *ymmh, *zmmh;
uint16_t cwd, swd, twd;
- if (!kvm_has_xsave()) {
+ if (!has_xsave) {
return kvm_get_fpu(cpu);
}
@@ -1584,7 +1605,7 @@ static int kvm_get_xcrs(X86CPU *cpu)
int i, ret;
struct kvm_xcrs xcrs;
- if (!kvm_has_xcrs()) {
+ if (!has_xcrs) {
return 0;
}
--
2.5.0
next prev parent reply other threads:[~2015-10-16 8:51 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 8:49 [Qemu-devel] [PULL 00/49] Misc patches for 2015-10-16 Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 01/49] nbd: switch from g_slice allocator to malloc Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 02/49] scsi: " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 03/49] megasas: fix megasas_get_sata_addr Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 04/49] configure: Require Python 2.6 Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 05/49] exec.c: Don't call cpu_reload_memory_map() from cpu_exec_init() Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 06/49] cpu-exec-common.c: Clarify comment about cpu_reload_memory_map()'s RCU operations Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 07/49] exec.c: Collect AddressSpace related fields into a CPUAddressSpace struct Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 08/49] checkpatch: allow open braces on typedef lines Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 09/49] linux-headers: update from kvm/next Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 10/49] target-i386/kvm: Hyper-V HV_X64_MSR_RESET support Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 11/49] target-i386/kvm: set Hyper-V features cpuid bit HV_X64_MSR_VP_INDEX_AVAILABLE Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 12/49] target-i386/kvm: Hyper-V HV_X64_MSR_VP_RUNTIME support Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 13/49] exec: remove non-TCG stuff from exec-all.h header Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 14/49] kvm-all: Align to qemu_real_host_page_size in kvm_set_phys_mem Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 15/49] checkpatch: port fix from kernel "## is not a valid modifier" Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 16/49] MAINTAINERS: add two devices to the e500 section Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 18/49] MAINTAINERS: Add more pxa2xx files and boards Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 19/49] MAINTAINERS: Add maintainer for ARM PrimeCell and integrated devices Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 20/49] MAINTAINERS: Add more devices to realview board Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 21/49] qemu-sockets: fix conversion of ipv4/ipv6 JSON to QemuOpts Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 22/49] README: fill out some useful quickstart information Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 23/49] qemu-char: cleanup qmp_chardev_add Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 24/49] qemu-char: cleanup HAVE_CHARDEV_* Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 25/49] qemu-char: add create to register_char_driver Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 26/49] qemu-char: convert file backend to data-driven creation Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 27/49] qemu-char: convert serial " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 28/49] qemu-char: convert parallel " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 29/49] qemu-char: convert pipe " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 30/49] qemu-char: convert socket " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 31/49] qemu-char: convert UDP " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 32/49] qemu-char: convert pty " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 33/49] qemu-char: convert null " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 34/49] qemu-char: convert mux " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 35/49] qemu-char: convert msmouse " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 36/49] qemu-char: convert braille " Paolo Bonzini
2015-10-16 8:49 ` [Qemu-devel] [PULL 37/49] qemu-char: convert testdev " Paolo Bonzini
2015-10-16 12:23 ` Eric Blake
2015-10-16 8:50 ` [Qemu-devel] [PULL 38/49] qemu-char: convert stdio " Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 39/49] qemu-char: convert console " Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 40/49] qemu-char: convert spice " Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 41/49] qemu-char: convert vc " Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 42/49] qemu-char: convert ringbuf " Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 43/49] qemu-char: cleanup after completed conversion to cd->create Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 44/49] doc/rcu: fix g_free_rcu() usage example Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 45/49] kvm: Make KVM_CAP_SIGNAL_MSI globally available Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 46/49] hw/pci: Introduce pci_requester_id() Paolo Bonzini
2015-10-16 8:50 ` [Qemu-devel] [PULL 47/49] kvm: Pass PCI device pointer to MSI routing functions Paolo Bonzini
2015-10-16 8:50 ` Paolo Bonzini [this message]
2015-10-16 8:50 ` [Qemu-devel] [PULL 49/49] kvm: Allow the Hyper-V vendor ID to be specified Paolo Bonzini
2015-10-16 15:26 ` [Qemu-devel] [PULL 00/49] Misc patches for 2015-10-16 Paolo Bonzini
2015-10-18 16:55 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444985411-17803-49-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).