From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Jason Wang" <jasowang@redhat.com>,
=?UTF-8?q?Marc-Andr=C3=A9=20Lureau?=
<marcandre.lureau@redhat.com>,
"Thibaut Collet" <thibaut.collet@6wind.com>
Subject: [Qemu-devel] [PULL 25/38] vhost user: add rarp sending after live migration for legacy guest
Date: Wed, 21 Oct 2015 13:27:57 +0300 [thread overview]
Message-ID: <1445423133-5119-26-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1445423133-5119-1-git-send-email-mst@redhat.com>
From: Thibaut Collet <thibaut.collet@6wind.com>
A new vhost user message is added to allow QEMU to ask to vhost user backend to
broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE
capability.
This new message is sent only if the backend supports the new
VHOST_USER_PROTOCOL_F_RARP protocol feature.
The payload of this new message is the MAC address of the guest (not known by
the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid
to create a new payload message type.
This new message has no equivalent ioctl so a new callback is added in the
userOps structure to send the request.
Upon reception of this new message the vhost user backend must generate and
broadcast a fake RARP request to notify the migration is terminated.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
[Rebased and fixed checkpatch errors - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
---
include/hw/virtio/vhost-backend.h | 3 +++
include/net/vhost_net.h | 1 +
hw/net/vhost_net.c | 17 +++++++++++++++++
hw/virtio/vhost-user.c | 32 +++++++++++++++++++++++++++++++-
net/vhost-user.c | 24 ++++++++++++++++++++++--
docs/specs/vhost-user.txt | 15 +++++++++++++++
6 files changed, 89 insertions(+), 3 deletions(-)
diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h
index ad19481..c59cc81 100644
--- a/include/hw/virtio/vhost-backend.h
+++ b/include/hw/virtio/vhost-backend.h
@@ -68,6 +68,8 @@ typedef int (*vhost_get_vq_index_op)(struct vhost_dev *dev, int idx);
typedef int (*vhost_set_vring_enable_op)(struct vhost_dev *dev,
int enable);
typedef bool (*vhost_requires_shm_log_op)(struct vhost_dev *dev);
+typedef int (*vhost_migration_done_op)(struct vhost_dev *dev,
+ char *mac_addr);
typedef struct VhostOps {
VhostBackendType backend_type;
@@ -94,6 +96,7 @@ typedef struct VhostOps {
vhost_get_vq_index_op vhost_get_vq_index;
vhost_set_vring_enable_op vhost_set_vring_enable;
vhost_requires_shm_log_op vhost_requires_shm_log;
+ vhost_migration_done_op vhost_migration_done;
} VhostOps;
extern const VhostOps user_ops;
diff --git a/include/net/vhost_net.h b/include/net/vhost_net.h
index 0188c4d..3389b41 100644
--- a/include/net/vhost_net.h
+++ b/include/net/vhost_net.h
@@ -27,6 +27,7 @@ void vhost_net_ack_features(VHostNetState *net, uint64_t features);
bool vhost_net_virtqueue_pending(VHostNetState *net, int n);
void vhost_net_virtqueue_mask(VHostNetState *net, VirtIODevice *dev,
int idx, bool mask);
+int vhost_net_notify_migration_done(VHostNetState *net, char* mac_addr);
VHostNetState *get_vhost_net(NetClientState *nc);
int vhost_set_vring_enable(NetClientState * nc, int enable);
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index 840f443..d91b7b1 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -388,6 +388,18 @@ void vhost_net_cleanup(struct vhost_net *net)
g_free(net);
}
+int vhost_net_notify_migration_done(struct vhost_net *net, char* mac_addr)
+{
+ const VhostOps *vhost_ops = net->dev.vhost_ops;
+ int r = -1;
+
+ if (vhost_ops->vhost_migration_done) {
+ r = vhost_ops->vhost_migration_done(&net->dev, mac_addr);
+ }
+
+ return r;
+}
+
bool vhost_net_virtqueue_pending(VHostNetState *net, int idx)
{
return vhost_virtqueue_pending(&net->dev, idx);
@@ -479,6 +491,11 @@ void vhost_net_virtqueue_mask(VHostNetState *net, VirtIODevice *dev,
{
}
+int vhost_net_notify_migration_done(struct vhost_net *net, char* mac_addr)
+{
+ return -1;
+}
+
VHostNetState *get_vhost_net(NetClientState *nc)
{
return 0;
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index 16d8e80..d804c5f 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -10,6 +10,7 @@
#include "hw/virtio/vhost.h"
#include "hw/virtio/vhost-backend.h"
+#include "hw/virtio/virtio-net.h"
#include "sysemu/char.h"
#include "sysemu/kvm.h"
#include "qemu/error-report.h"
@@ -27,9 +28,10 @@
#define VHOST_MEMORY_MAX_NREGIONS 8
#define VHOST_USER_F_PROTOCOL_FEATURES 30
-#define VHOST_USER_PROTOCOL_FEATURE_MASK 0x3ULL
+#define VHOST_USER_PROTOCOL_FEATURE_MASK 0x7ULL
#define VHOST_USER_PROTOCOL_F_MQ 0
#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
+#define VHOST_USER_PROTOCOL_F_RARP 2
typedef enum VhostUserRequest {
VHOST_USER_NONE = 0,
@@ -51,6 +53,7 @@ typedef enum VhostUserRequest {
VHOST_USER_SET_PROTOCOL_FEATURES = 16,
VHOST_USER_GET_QUEUE_NUM = 17,
VHOST_USER_SET_VRING_ENABLE = 18,
+ VHOST_USER_SEND_RARP = 19,
VHOST_USER_MAX
} VhostUserRequest;
@@ -566,6 +569,32 @@ static bool vhost_user_requires_shm_log(struct vhost_dev *dev)
VHOST_USER_PROTOCOL_F_LOG_SHMFD);
}
+static int vhost_user_migration_done(struct vhost_dev *dev, char* mac_addr)
+{
+ VhostUserMsg msg = { 0 };
+ int err;
+
+ assert(dev->vhost_ops->backend_type == VHOST_BACKEND_TYPE_USER);
+
+ /* If guest supports GUEST_ANNOUNCE do nothing */
+ if (virtio_has_feature(dev->acked_features, VIRTIO_NET_F_GUEST_ANNOUNCE)) {
+ return 0;
+ }
+
+ /* if backend supports VHOST_USER_PROTOCOL_F_RARP ask it to send the RARP */
+ if (virtio_has_feature(dev->protocol_features,
+ VHOST_USER_PROTOCOL_F_RARP)) {
+ msg.request = VHOST_USER_SEND_RARP;
+ msg.flags = VHOST_USER_VERSION;
+ memcpy((char *)&msg.u64, mac_addr, 6);
+ msg.size = sizeof(m.u64);
+
+ err = vhost_user_write(dev, &msg, NULL, 0);
+ return err;
+ }
+ return -1;
+}
+
const VhostOps user_ops = {
.backend_type = VHOST_BACKEND_TYPE_USER,
.vhost_backend_init = vhost_user_init,
@@ -587,4 +616,5 @@ const VhostOps user_ops = {
.vhost_get_vq_index = vhost_user_get_vq_index,
.vhost_set_vring_enable = vhost_user_set_vring_enable,
.vhost_requires_shm_log = vhost_user_requires_shm_log,
+ .vhost_migration_done = vhost_user_migration_done,
};
diff --git a/net/vhost-user.c b/net/vhost-user.c
index b067524..17b5c2a 100644
--- a/net/vhost-user.c
+++ b/net/vhost-user.c
@@ -106,9 +106,29 @@ err:
static ssize_t vhost_user_receive(NetClientState *nc, const uint8_t *buf,
size_t size)
{
- /* Discard the request that is received and managed by backend
- * by an other way.
+ /* In case of RARP (message size is 60) notify backup to send a fake RARP.
+ This fake RARP will be sent by backend only for guest
+ without GUEST_ANNOUNCE capability.
*/
+ if (size == 60) {
+ VhostUserState *s = DO_UPCAST(VhostUserState, nc, nc);
+ int r;
+ static int display_rarp_failure = 1;
+ char mac_addr[6];
+
+ /* extract guest mac address from the RARP message */
+ memcpy(mac_addr, &buf[6], 6);
+
+ r = vhost_net_notify_migration_done(s->vhost_net, mac_addr);
+
+ if ((r != 0) && (display_rarp_failure)) {
+ fprintf(stderr,
+ "Vhost user backend fails to broadcast fake RARP\n");
+ fflush(stderr);
+ display_rarp_failure = 0;
+ }
+ }
+
return size;
}
diff --git a/docs/specs/vhost-user.txt b/docs/specs/vhost-user.txt
index e0292a0..e0d71e2 100644
--- a/docs/specs/vhost-user.txt
+++ b/docs/specs/vhost-user.txt
@@ -194,6 +194,7 @@ Protocol features
#define VHOST_USER_PROTOCOL_F_MQ 0
#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
+#define VHOST_USER_PROTOCOL_F_RARP 2
Message types
-------------
@@ -381,3 +382,17 @@ Message types
Master payload: vring state description
Signal slave to enable or disable corresponding vring.
+
+ * VHOST_USER_SEND_RARP
+
+ Id: 19
+ Equivalent ioctl: N/A
+ Master payload: u64
+
+ Ask vhost user backend to broadcast a fake RARP to notify the migration
+ is terminated for guest that does not support GUEST_ANNOUNCE.
+ Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in
+ VHOST_USER_GET_FEATURES and protocol feature bit VHOST_USER_PROTOCOL_F_RARP
+ is present in VHOST_USER_GET_PROTOCOL_FEATURES.
+ The first 6 bytes of the payload contain the mac address of the guest to
+ allow the vhost user backend to construct and broadcast the fake RARP.
--
MST
next prev parent reply other threads:[~2015-10-21 10:28 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 10:26 [Qemu-devel] [PULL 00/38] vhost, pc, virtio features, fixes, cleanups Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 01/38] intel_iommu: Add support for translation for devices behind bridges Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 02/38] exec: factor out duplicate mmap code Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 03/38] net: don't set native endianness Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 04/38] tests: re-enable vhost-user-test Michael S. Tsirkin
2015-10-22 11:36 ` Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 05/38] vhost: add vhost_has_free_slot() interface Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 06/38] pc-dimm: add vhost slots limit check before commiting to hotplug Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 07/38] vhost: fail backend intialization early Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 08/38] virtio: add some migration doc Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 09/38] configure: probe for memfd Michael S. Tsirkin
2015-10-21 10:26 ` [Qemu-devel] [PULL 10/38] linux-headers: add unistd.h Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 11/38] build-sys: split util-obj- on multi-lines Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 12/38] util: add linux-only memfd fallback Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 13/38] util: add memfd helpers Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 14/38] util: add fallback for qemu_memfd_alloc() Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 15/38] vhost: document log resizing Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 16/38] vhost: add vhost_set_log_base op Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 17/38] vhost-user: add vhost_user_requires_shm_log() Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 18/38] vhost: alloc shareable log Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 19/38] vhost-user: send log shm fd along with log_base Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 20/38] vhost-user: add a migration blocker Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 21/38] vhost: use a function for each call Michael S. Tsirkin
2015-10-22 14:09 ` Laurent Desnogues
2015-10-22 14:17 ` Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 22/38] vhost-user: document migration log Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 23/38] net: add trace_vhost_user_event Michael S. Tsirkin
2015-10-21 10:27 ` [Qemu-devel] [PULL 24/38] vhost user: add support of live migration Michael S. Tsirkin
2015-10-21 10:27 ` Michael S. Tsirkin [this message]
2015-10-21 10:28 ` [Qemu-devel] [PULL 26/38] vhost-user: use an enum helper for features mask Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 27/38] vhost: add migration block if memfd failed Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 28/38] vhost-user-test: move wait_for_fds() out Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 29/38] vhost-user-test: remove useless static check Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 30/38] vhost-user-test: wrap server in TestServer struct Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 31/38] vhost-user-test: learn to tweak various qemu arguments Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 32/38] vhost-user-test: add live-migration test Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 33/38] vhost-user-test: check ownership during migration Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 34/38] seccomp: add memfd_create to whitelist Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 35/38] piix: fix resource leak reported by Coverity Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 36/38] vhost: set the correct queue index in case of migration with multiqueue Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 37/38] i386: keep cpu_model field in MachineState uptodate Michael S. Tsirkin
2015-10-21 10:28 ` [Qemu-devel] [PULL 38/38] hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT Michael S. Tsirkin
2015-10-21 14:06 ` [Qemu-devel] [PULL 00/38] vhost, pc, virtio features, fixes, cleanups Peter Maydell
2015-10-22 11:40 ` Michael S. Tsirkin
2015-10-22 12:33 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445423133-5119-26-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=thibaut.collet@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).