[Qemu-devel] [PULL v1 1/4] crypto: allow use of nettle/gcrypt to be selected explicitly

["Daniel P. Berrange" <berrange@redhat.com>]

Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.

It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.

This gives two new configure flags, which allow the
following possibilities

Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)

 ./configure

Automatically determine nettle vs gcrypt based on
which is installed

 ./configure --disable-gnutls

Force use of nettle

 ./configure --enable-nettle

Force use of gcrypt

 ./configure --enable-gcrypt

Force use of built-in AES & crippled-DES

 ./configure --disable-nettle --disable-gcrypt

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 configure       | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++-------
 crypto/cipher.c |  8 +++---
 crypto/init.c   | 26 +++++++++---------
 3 files changed, 89 insertions(+), 28 deletions(-)

diff --git a/configure b/configure
index 07eee3d..58f6fc1 100755
--- a/configure
+++ b/configure
@@ -331,6 +331,8 @@ gtkabi=""
 gtk_gl="no"
 gnutls=""
 gnutls_hash=""
+nettle=""
+gcrypt=""
 vte=""
 virglrenderer=""
 tpm="yes"
@@ -1114,6 +1116,14 @@ for opt do
   ;;
   --enable-gnutls) gnutls="yes"
   ;;
+  --disable-nettle) nettle="no"
+  ;;
+  --enable-nettle) nettle="yes"
+  ;;
+  --disable-gcrypt) gcrypt="no"
+  ;;
+  --enable-gcrypt) gcrypt="yes"
+  ;;
   --enable-rdma) rdma="yes"
   ;;
   --disable-rdma) rdma="no"
@@ -1324,6 +1334,8 @@ disabled with --disable-FEATURE, default is enabled if available:
   sparse          sparse checker
 
   gnutls          GNUTLS cryptography support
+  nettle          nettle cryptography support
+  gcrypt          libgcrypt cryptography support
   sdl             SDL UI
   --with-sdlabi     select preferred SDL ABI 1.2 or 2.0
   gtk             gtk UI
@@ -2254,20 +2266,61 @@ else
     gnutls_hash="no"
 fi
 
-if test "$gnutls_gcrypt" != "no"; then
+
+# If user didn't give a --disable/enable-gcrypt flag,
+# then mark as disabled if user requested nettle
+# explicitly, otherwise pick based on gnutls linkage
+if test -z "$gcrypt"
+then
+    if test "$nettle" = "yes"
+    then
+        gcrypt="no"
+    else
+        if test "$gnutls" = "yes"
+        then
+            gcrypt=$gnutls_gcrypt
+        fi
+    fi
+fi
+
+# If user didn't give a --disable/enable-nettle flag,
+# then mark as disabled if user requested gcrypt
+# explicitly, otherwise pick based on gnutls linkage
+if test -z "$nettle"
+then
+    if test "$gcrypt" = "yes"
+    then
+        nettle="no"
+    else
+        if test "$gnutls" = "yes"
+        then
+            nettle=$gnutls_nettle
+        fi
+    fi
+fi
+
+if test "$gcrypt" != "no"; then
     if has "libgcrypt-config"; then
         gcrypt_cflags=`libgcrypt-config --cflags`
         gcrypt_libs=`libgcrypt-config --libs`
         libs_softmmu="$gcrypt_libs $libs_softmmu"
         libs_tools="$gcrypt_libs $libs_tools"
         QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
+        gcrypt="yes"
+        if test -z "$nettle"; then
+           nettle="no"
+        fi
     else
-        feature_not_found "gcrypt" "Install gcrypt devel"
+        if test "$gcrypt" = "yes"; then
+            feature_not_found "gcrypt" "Install gcrypt devel"
+        else
+            gcrypt="no"
+        fi
     fi
 fi
 
 
-if test "$gnutls_nettle" != "no"; then
+if test "$nettle" != "no"; then
     if $pkg_config --exists "nettle"; then
         nettle_cflags=`$pkg_config --cflags nettle`
         nettle_libs=`$pkg_config --libs nettle`
@@ -2275,11 +2328,21 @@ if test "$gnutls_nettle" != "no"; then
         libs_softmmu="$nettle_libs $libs_softmmu"
         libs_tools="$nettle_libs $libs_tools"
         QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
+        nettle="yes"
     else
-        feature_not_found "nettle" "Install nettle devel"
+        if test "$nettle" = "yes"; then
+            feature_not_found "nettle" "Install nettle devel"
+        else
+            nettle="no"
+        fi
     fi
 fi
 
+if test "$gcrypt" = "yes" && test "$nettle" = "yes"
+then
+    error_exit "Only one of gcrypt & nettle can be enabled"
+fi
+
 ##########################################
 # libtasn1 - only for the TLS creds/session test suite
 
@@ -4605,8 +4668,8 @@ echo "GTK support       $gtk"
 echo "GTK GL support    $gtk_gl"
 echo "GNUTLS support    $gnutls"
 echo "GNUTLS hash       $gnutls_hash"
-echo "GNUTLS gcrypt     $gnutls_gcrypt"
-echo "GNUTLS nettle     $gnutls_nettle ${gnutls_nettle+($nettle_version)}"
+echo "libgcrypt         $gcrypt"
+echo "nettle            $nettle ${nettle+($nettle_version)}"
 echo "libtasn1          $tasn1"
 echo "VTE support       $vte"
 echo "curses support    $curses"
@@ -4972,11 +5035,11 @@ fi
 if test "$gnutls_hash" = "yes" ; then
   echo "CONFIG_GNUTLS_HASH=y" >> $config_host_mak
 fi
-if test "$gnutls_gcrypt" = "yes" ; then
-  echo "CONFIG_GNUTLS_GCRYPT=y" >> $config_host_mak
+if test "$gcrypt" = "yes" ; then
+  echo "CONFIG_GCRYPT=y" >> $config_host_mak
 fi
-if test "$gnutls_nettle" = "yes" ; then
-  echo "CONFIG_GNUTLS_NETTLE=y" >> $config_host_mak
+if test "$nettle" = "yes" ; then
+  echo "CONFIG_NETTLE=y" >> $config_host_mak
   echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
 fi
 if test "$tasn1" = "yes" ; then
diff --git a/crypto/cipher.c b/crypto/cipher.c
index 024a00c..c8bd180 100644
--- a/crypto/cipher.c
+++ b/crypto/cipher.c
@@ -47,7 +47,7 @@ qcrypto_cipher_validate_key_length(QCryptoCipherAlgorithm alg,
     return true;
 }
 
-#if defined(CONFIG_GNUTLS_GCRYPT) || defined(CONFIG_GNUTLS_NETTLE)
+#if defined(CONFIG_GCRYPT) || defined(CONFIG_NETTLE)
 static uint8_t *
 qcrypto_cipher_munge_des_rfb_key(const uint8_t *key,
                                  size_t nkey)
@@ -63,11 +63,11 @@ qcrypto_cipher_munge_des_rfb_key(const uint8_t *key,
     }
     return ret;
 }
-#endif /* CONFIG_GNUTLS_GCRYPT || CONFIG_GNUTLS_NETTLE */
+#endif /* CONFIG_GCRYPT || CONFIG_NETTLE */
 
-#ifdef CONFIG_GNUTLS_GCRYPT
+#ifdef CONFIG_GCRYPT
 #include "crypto/cipher-gcrypt.c"
-#elif defined CONFIG_GNUTLS_NETTLE
+#elif defined CONFIG_NETTLE
 #include "crypto/cipher-nettle.c"
 #else
 #include "crypto/cipher-builtin.c"
diff --git a/crypto/init.c b/crypto/init.c
index 7447882..d94faac 100644
--- a/crypto/init.c
+++ b/crypto/init.c
@@ -24,8 +24,9 @@
 #ifdef CONFIG_GNUTLS
 #include <gnutls/gnutls.h>
 #include <gnutls/crypto.h>
+#endif
 
-#ifdef CONFIG_GNUTLS_GCRYPT
+#ifdef CONFIG_GCRYPT
 #include <gcrypt.h>
 #endif
 
@@ -37,6 +38,7 @@
  *  - When GNUTLS >= 2.12, we must not initialize gcrypt threading
  *    because GNUTLS will do that itself
  *  - When GNUTLS < 2.12 we must always initialize gcrypt threading
+ *  - When GNUTLS is disabled we must always initialize gcrypt threading
  *
  * But....
  *
@@ -47,12 +49,15 @@
  *
  *   - gcrypt < 1.6.0
  * AND
- *   - gnutls < 2.12
+ *      - gnutls < 2.12
+ *   OR
+ *      - gnutls is disabled
  *
  */
 
-#if (defined(CONFIG_GNUTLS_GCRYPT) &&           \
-     (!defined(GNUTLS_VERSION_NUMBER) ||        \
+#if (defined(CONFIG_GCRYPT) &&                  \
+     (!defined(CONFIG_GNUTLS) ||                \
+      !defined(GNUTLS_VERSION_NUMBER) ||       \
       (GNUTLS_VERSION_NUMBER < 0x020c00)) &&    \
      (!defined(GCRYPT_VERSION_NUMBER) ||        \
       (GCRYPT_VERSION_NUMBER < 0x010600)))
@@ -113,6 +118,7 @@ static struct gcry_thread_cbs qcrypto_gcrypt_thread_impl = {
 
 int qcrypto_init(Error **errp)
 {
+#ifdef CONFIG_GNUTLS
     int ret;
     ret = gnutls_global_init();
     if (ret < 0) {
@@ -125,8 +131,9 @@ int qcrypto_init(Error **errp)
     gnutls_global_set_log_level(10);
     gnutls_global_set_log_function(qcrypto_gnutls_log);
 #endif
+#endif
 
-#ifdef CONFIG_GNUTLS_GCRYPT
+#ifdef CONFIG_GCRYPT
     if (!gcry_check_version(GCRYPT_VERSION)) {
         error_setg(errp, "Unable to initialize gcrypt");
         return -1;
@@ -139,12 +146,3 @@ int qcrypto_init(Error **errp)
 
     return 0;
 }
-
-#else /* ! CONFIG_GNUTLS */
-
-int qcrypto_init(Error **errp G_GNUC_UNUSED)
-{
-    return 0;
-}
-
-#endif /* ! CONFIG_GNUTLS */
-- 
2.4.3