From: "Gabriel L. Somlo" <somlo@cmu.edu>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, jordan.l.justen@intel.com,
armbru@redhat.com, kraxel@redhat.com, pbonzini@redhat.com,
markmb@redhat.com, lersek@redhat.com
Subject: [Qemu-devel] [PATCH v5 6/6] fw_cfg: replace ioport data read with generic method
Date: Thu, 5 Nov 2015 09:32:52 -0500 [thread overview]
Message-ID: <1446733972-1602-7-git-send-email-somlo@cmu.edu> (raw)
In-Reply-To: <1446733972-1602-1-git-send-email-somlo@cmu.edu>
IOPort read access is limited to one byte at a time by
fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely
ignore its size argument (which will always be 1), and simply
call its fw_cfg_read() helper function once, returning 8 bits
via the least significant byte of a 64-bit return value.
This patch replaces fw_cfg_comb_read() with the generic method
fw_cfg_data_read(), and removes the unused fw_cfg_read() helper.
When called with size = 1, fw_cfg_data_read() acts exactly like
fw_cfg_read(), performing the same set of sanity checks, and
executing the while loop at most once (subject to the current
read offset being within range).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewd-by: Laszlo Ersek <lersek@redhat.com>
---
hw/nvram/fw_cfg.c | 25 +------------------------
1 file changed, 1 insertion(+), 24 deletions(-)
diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 8f566f6..a1d650d 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -304,23 +304,6 @@ static uint64_t fw_cfg_data_read(void *opaque, hwaddr addr, unsigned size)
return value;
}
-static uint8_t fw_cfg_read(FWCfgState *s)
-{
- int arch = !!(s->cur_entry & FW_CFG_ARCH_LOCAL);
- FWCfgEntry *e = (s->cur_entry == FW_CFG_INVALID) ? NULL :
- &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
- uint8_t ret;
-
- if (s->cur_entry == FW_CFG_INVALID || !e->data || s->cur_offset >= e->len)
- ret = 0;
- else {
- ret = e->data[s->cur_offset++];
- }
-
- trace_fw_cfg_read(s, ret);
- return ret;
-}
-
static void fw_cfg_data_mem_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
@@ -470,12 +453,6 @@ static bool fw_cfg_ctl_mem_valid(void *opaque, hwaddr addr,
return is_write && size == 2;
}
-static uint64_t fw_cfg_comb_read(void *opaque, hwaddr addr,
- unsigned size)
-{
- return fw_cfg_read(opaque);
-}
-
static void fw_cfg_comb_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
@@ -513,7 +490,7 @@ static const MemoryRegionOps fw_cfg_data_mem_ops = {
};
static const MemoryRegionOps fw_cfg_comb_mem_ops = {
- .read = fw_cfg_comb_read,
+ .read = fw_cfg_data_read,
.write = fw_cfg_comb_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.accepts = fw_cfg_comb_valid,
--
2.4.3
next prev parent reply other threads:[~2015-11-05 14:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-05 14:32 [Qemu-devel] [PATCH v5 0/6] fw_cfg: spec update, misc. cleanup, optimize read Gabriel L. Somlo
2015-11-05 14:32 ` [Qemu-devel] [PATCH v5 1/6] fw_cfg: move internal function call docs to header file Gabriel L. Somlo
2015-11-05 14:32 ` [Qemu-devel] [PATCH v5 2/6] fw_cfg: amend callback behavior spec to once per select Gabriel L. Somlo
2015-11-05 14:32 ` [Qemu-devel] [PATCH v5 3/6] fw_cfg: remove offset argument from callback prototype Gabriel L. Somlo
2015-11-05 14:32 ` [Qemu-devel] [PATCH v5 4/6] fw_cfg: avoid calculating invalid current entry pointer Gabriel L. Somlo
2015-11-05 14:32 ` [Qemu-devel] [PATCH v5 5/6] fw_cfg: add generic non-DMA read method Gabriel L. Somlo
2015-11-05 16:18 ` Laszlo Ersek
2015-11-05 14:32 ` Gabriel L. Somlo [this message]
2015-11-05 16:11 ` [Qemu-devel] [PATCH v5 6/6] fw_cfg: replace ioport data read with generic method Laszlo Ersek
2015-11-23 14:18 ` [Qemu-devel] [PATCH v5 0/6] fw_cfg: spec update, misc. cleanup, optimize read Gabriel L. Somlo
2015-11-24 7:21 ` Gerd Hoffmann
2015-11-24 12:29 ` Gabriel L. Somlo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446733972-1602-7-git-send-email-somlo@cmu.edu \
--to=somlo@cmu.edu \
--cc=armbru@redhat.com \
--cc=jordan.l.justen@intel.com \
--cc=kraxel@redhat.com \
--cc=lersek@redhat.com \
--cc=markmb@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).