From: "Denis V. Lunev" <den@openvz.org>
Cc: Kevin Wolf <kwolf@redhat.com>, "Denis V. Lunev" <den@openvz.org>,
qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>,
Juan Quintela <quintela@redhat.com>
Subject: [Qemu-devel] [PATCH 10/10] migration: normalize locking in migration/savevm.c
Date: Sat, 7 Nov 2015 18:55:00 +0300 [thread overview]
Message-ID: <1446911700-16803-11-git-send-email-den@openvz.org> (raw)
In-Reply-To: <1446911700-16803-1-git-send-email-den@openvz.org>
basically all bdrv_* operations must be called under aio_context_acquire
except ones with bdrv_all prefix.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Juan Quintela <quintela@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
---
migration/savevm.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/migration/savevm.c b/migration/savevm.c
index 6be30cb..5e6ff55 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1248,6 +1248,7 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
struct tm tm;
const char *name = qdict_get_try_str(qdict, "name");
Error *local_err = NULL;
+ AioContext *aio_context;
if (!bdrv_all_can_snapshot(&bs)) {
monitor_printf(mon, "Device '%s' is writable but does not "
@@ -1269,6 +1270,7 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
monitor_printf(mon, "No block device can accept snapshots\n");
return;
}
+ aio_context = bdrv_get_aio_context(bs);
saved_vm_running = runstate_is_running();
@@ -1279,6 +1281,8 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
}
vm_stop(RUN_STATE_SAVE_VM);
+ aio_context_acquire(aio_context);
+
memset(sn, 0, sizeof(*sn));
/* fill auxiliary fields */
@@ -1323,6 +1327,7 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
}
the_end:
+ aio_context_release(aio_context);
if (saved_vm_running) {
vm_start();
}
@@ -1361,6 +1366,7 @@ int load_vmstate(const char *name)
QEMUSnapshotInfo sn;
QEMUFile *f;
int ret;
+ AioContext *aio_context;
if (!bdrv_all_can_snapshot(&bs)) {
error_report("Device '%s' is writable but does not support snapshots.",
@@ -1379,9 +1385,12 @@ int load_vmstate(const char *name)
error_report("No block device supports snapshots");
return -ENOTSUP;
}
+ aio_context = bdrv_get_aio_context(bs);
/* Don't even try to load empty VM states */
+ aio_context_acquire(aio_context);
ret = bdrv_snapshot_find(bs_vm_state, &sn, name);
+ aio_context_release(aio_context);
if (ret < 0) {
return ret;
} else if (sn.vm_state_size == 0) {
@@ -1409,9 +1418,12 @@ int load_vmstate(const char *name)
qemu_system_reset(VMRESET_SILENT);
migration_incoming_state_new(f);
- ret = qemu_loadvm_state(f);
+ aio_context_acquire(aio_context);
+ ret = qemu_loadvm_state(f);
qemu_fclose(f);
+ aio_context_release(aio_context);
+
migration_incoming_state_destroy();
if (ret < 0) {
error_report("Error %d while loading VM state", ret);
@@ -1442,14 +1454,19 @@ void hmp_info_snapshots(Monitor *mon, const QDict *qdict)
int nb_sns, i;
int total;
int *available_snapshots;
+ AioContext *aio_context;
bs = bdrv_all_find_vmstate_bs();
if (!bs) {
monitor_printf(mon, "No available block device supports snapshots\n");
return;
}
+ aio_context = bdrv_get_aio_context(bs);
+ aio_context_acquire(aio_context);
nb_sns = bdrv_snapshot_list(bs, &sn_tab);
+ aio_context_release(aio_context);
+
if (nb_sns < 0) {
monitor_printf(mon, "bdrv_snapshot_list: error %d\n", nb_sns);
return;
--
2.5.0
next prev parent reply other threads:[~2015-11-07 15:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-07 15:54 [Qemu-devel] [PATCH for 2.5 v6 0/10] dataplane snapshot fixes Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 01/10] snapshot: create helper to test that block drivers supports snapshots Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 02/10] snapshot: return error code from bdrv_snapshot_delete_by_id_or_name Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 03/10] snapshot: create bdrv_all_delete_snapshot helper Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 04/10] snapshot: create bdrv_all_goto_snapshot helper Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 05/10] snapshot: create bdrv_all_find_snapshot helper Denis V. Lunev
2015-11-09 17:27 ` Stefan Hajnoczi
2015-11-07 15:54 ` [Qemu-devel] [PATCH 06/10] migration: drop find_vmstate_bs check in hmp_delvm Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 07/10] snapshot: create bdrv_all_create_snapshot helper Denis V. Lunev
2015-11-09 17:33 ` Stefan Hajnoczi
2015-11-07 15:54 ` [Qemu-devel] [PATCH 08/10] migration: reorder processing in hmp_savevm Denis V. Lunev
2015-11-07 15:54 ` [Qemu-devel] [PATCH 09/10] migration: implement bdrv_all_find_vmstate_bs helper Denis V. Lunev
2015-11-07 15:55 ` Denis V. Lunev [this message]
2015-11-09 17:37 ` [Qemu-devel] [PATCH for 2.5 v6 0/10] dataplane snapshot fixes Stefan Hajnoczi
2015-11-09 17:57 ` Denis V. Lunev
2015-11-10 9:45 ` Stefan Hajnoczi
-- strict thread matches above, loose matches on Subject: below --
2015-11-10 14:25 [Qemu-devel] [PATCH for 2.5 v7 " Denis V. Lunev
2015-11-10 14:25 ` [Qemu-devel] [PATCH 10/10] migration: normalize locking in migration/savevm.c Denis V. Lunev
2015-11-16 15:24 [Qemu-devel] [PATCH for 2.5 v8 0/10] dataplane snapshot fixes Denis V. Lunev
2015-11-16 15:24 ` [Qemu-devel] [PATCH 10/10] migration: normalize locking in migration/savevm.c Denis V. Lunev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446911700-16803-11-git-send-email-den@openvz.org \
--to=den@openvz.org \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).