From: Michael Davidsaver <mdavidsaver@gmail.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Peter Crosthwaite <crosthwaitepeter@gmail.com>,
qemu-arm@nongnu.org, Michael Davidsaver <mdavidsaver@gmail.com>
Subject: [Qemu-devel] [PATCH 15/18] arm: gic: Remove references to NVIC
Date: Sun, 8 Nov 2015 20:11:42 -0500 [thread overview]
Message-ID: <1447031505-12477-16-git-send-email-mdavidsaver@gmail.com> (raw)
In-Reply-To: <1447031505-12477-1-git-send-email-mdavidsaver@gmail.com>
armv7m_nvic.c no longer relies on the GIC.
Remove REV_NVIC and conditionals which use it.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
---
hw/intc/arm_gic.c | 14 +++++++-------
hw/intc/arm_gic_common.c | 23 ++++++++---------------
hw/intc/gic_internal.h | 7 ++-----
3 files changed, 17 insertions(+), 27 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 8bad132..d543a93 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -184,7 +184,7 @@ static void gic_set_irq(void *opaque, int irq, int level)
return;
}
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
gic_set_irq_11mpcore(s, irq, level, cm, target);
} else {
gic_set_irq_generic(s, irq, level, cm, target);
@@ -335,7 +335,7 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs)
return 1023;
}
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
/* Clear pending flags for both level and edge triggered interrupts.
* Level triggered IRQs will be reasserted once they become inactive.
*/
@@ -514,7 +514,7 @@ void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs)
return; /* No active IRQ. */
}
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
/* Mark level triggered interrupts as pending if they are still
raised. */
if (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_ENABLED(irq, cm)
@@ -672,7 +672,7 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
} else if (offset < 0xf10) {
goto bad_reg;
} else if (offset < 0xf30) {
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
goto bad_reg;
}
@@ -883,7 +883,7 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
if (irq < GIC_NR_SGIS)
value |= 0xaa;
for (i = 0; i < 4; i++) {
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
if (value & (1 << (i * 2))) {
GIC_SET_MODEL(irq + i);
} else {
@@ -901,7 +901,7 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
goto bad_reg;
} else if (offset < 0xf20) {
/* GICD_CPENDSGIRn */
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
goto bad_reg;
}
irq = (offset - 0xf10);
@@ -912,7 +912,7 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
}
} else if (offset < 0xf30) {
/* GICD_SPENDSGIRn */
- if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
+ if (s->revision == REV_11MPCORE) {
goto bad_reg;
}
irq = (offset - 0xf20);
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index 9c82b97..4987047 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -97,9 +97,7 @@ void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
* [N+32..N+63] PPIs for CPU 1
* ...
*/
- if (s->revision != REV_NVIC) {
- i += (GIC_INTERNAL * s->num_cpu);
- }
+ i += (GIC_INTERNAL * s->num_cpu);
qdev_init_gpio_in(DEVICE(s), handler, i);
for (i = 0; i < s->num_cpu; i++) {
@@ -113,16 +111,12 @@ void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
- if (s->revision != REV_NVIC) {
- /* This is the main CPU interface "for this core". It is always
- * present because it is required by both software emulation and KVM.
- * NVIC is not handled here because its CPU interface is different,
- * neither it can use KVM.
- */
- memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
- s, "gic_cpu", s->revision == 2 ? 0x1000 : 0x100);
- sysbus_init_mmio(sbd, &s->cpuiomem[0]);
- }
+ /* This is the main CPU interface "for this core". It is always
+ * present because it is required by both software emulation and KVM.
+ */
+ memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
+ s, "gic_cpu", s->revision == 2 ? 0x1000 : 0x100);
+ sysbus_init_mmio(sbd, &s->cpuiomem[0]);
}
static void arm_gic_common_realize(DeviceState *dev, Error **errp)
@@ -154,7 +148,7 @@ static void arm_gic_common_realize(DeviceState *dev, Error **errp)
}
if (s->security_extn &&
- (s->revision == REV_11MPCORE || s->revision == REV_NVIC)) {
+ (s->revision == REV_11MPCORE)) {
error_setg(errp, "this GIC revision does not implement "
"the security extensions");
return;
@@ -247,7 +241,6 @@ static Property arm_gic_common_properties[] = {
DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32),
/* Revision can be 1 or 2 for GIC architecture specification
* versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
- * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
*/
DEFINE_PROP_UINT32("revision", GICState, revision, 1),
/* True if the GIC should implement the security extensions */
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index 20c1e8a..a1f9320 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -25,9 +25,7 @@
#define ALL_CPU_MASK ((unsigned)(((1 << GIC_NCPU) - 1)))
-/* The NVIC has 16 internal vectors. However these are not exposed
- through the normal GIC interface. */
-#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
+#define GIC_BASE_IRQ 0
#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
@@ -75,7 +73,6 @@
/* The special cases for the revision property: */
#define REV_11MPCORE 0
-#define REV_NVIC 0xffffffff
void gic_set_pending_private(GICState *s, int cpu, int irq);
uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs);
@@ -87,7 +84,7 @@ void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val,
static inline bool gic_test_pending(GICState *s, int irq, int cm)
{
- if (s->revision == REV_NVIC || s->revision == REV_11MPCORE) {
+ if (s->revision == REV_11MPCORE) {
return s->irq_state[irq].pending & cm;
} else {
/* Edge-triggered interrupts are marked pending on a rising edge, but
--
2.1.4
next prev parent reply other threads:[~2015-11-09 1:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-09 1:11 [Qemu-devel] [PATCH 00/18] Fix exception handling and msr/mrs access Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 01/18] armv7m: MRS/MSR handle unprivileged access Michael Davidsaver
2015-11-17 17:09 ` Peter Maydell
2015-12-02 22:51 ` Michael Davidsaver
2015-12-02 23:04 ` Peter Maydell
2015-11-09 1:11 ` [Qemu-devel] [PATCH 02/18] armv7m: Undo armv7m.hack Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 03/18] armv7m: Complain about incorrect exception table entries Michael Davidsaver
2015-11-17 17:20 ` Peter Maydell
2015-12-02 22:52 ` Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 04/18] armv7m: Explicit error for bad vector table Michael Davidsaver
2015-11-17 17:33 ` Peter Maydell
2015-12-02 22:55 ` Michael Davidsaver
2015-12-02 23:09 ` Peter Maydell
2015-11-09 1:11 ` [Qemu-devel] [PATCH 05/18] armv7m: expand NVIC state Michael Davidsaver
2015-11-17 18:10 ` Peter Maydell
2015-12-02 22:58 ` Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 06/18] armv7m: new NVIC utility functions Michael Davidsaver
2015-11-20 13:25 ` Peter Maydell
2015-12-02 23:18 ` Michael Davidsaver
2015-12-03 0:11 ` Peter Maydell
2015-11-09 1:11 ` [Qemu-devel] [PATCH 07/18] armv7m: Update NVIC registers Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 08/18] armv7m: fix RETTOBASE Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 09/18] armv7m: NVIC update vmstate Michael Davidsaver
2015-11-17 17:58 ` Peter Maydell
2015-12-02 23:19 ` Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 10/18] armv7m: NVIC initialization Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 11/18] armv7m: fix I and F flag handling Michael Davidsaver
2015-11-20 13:47 ` Peter Maydell
2015-12-02 23:22 ` Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 12/18] armv7m: simpler/faster exception start Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 13/18] armv7m: implement CFSR and HFSR Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 14/18] armv7m: auto-clear FAULTMASK Michael Davidsaver
2015-11-09 1:11 ` Michael Davidsaver [this message]
2015-11-17 18:00 ` [Qemu-devel] [PATCH 15/18] arm: gic: Remove references to NVIC Peter Maydell
2015-11-09 1:11 ` [Qemu-devel] [PATCH 16/18] armv7m: check exception return consistency Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 17/18] armv7m: implement CCR Michael Davidsaver
2015-11-09 1:11 ` [Qemu-devel] [PATCH 18/18] armv7m: prevent unprivileged write to STIR Michael Davidsaver
2015-11-17 17:07 ` [Qemu-devel] [PATCH 00/18] Fix exception handling and msr/mrs access Peter Maydell
2015-11-20 13:59 ` Peter Maydell
2015-12-02 22:48 ` Michael Davidsaver
2015-12-17 19:36 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447031505-12477-16-git-send-email-mdavidsaver@gmail.com \
--to=mdavidsaver@gmail.com \
--cc=crosthwaitepeter@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).