* [Qemu-devel] [PATCH v12 3/3] block/gluster: add support for multiple gluster servers
2015-11-09 10:02 [Qemu-devel] [PATCH 0/3] block/gluster: add support for multiple gluster servers Prasanna Kumar Kalever
@ 2015-11-09 10:02 ` Prasanna Kumar Kalever
2015-11-09 23:38 ` Jeff Cody
0 siblings, 1 reply; 3+ messages in thread
From: Prasanna Kumar Kalever @ 2015-11-09 10:02 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, pkrempa, Prasanna Kumar Kalever, stefanha, deepakcs,
bharata, rtalur
This patch adds a way to specify multiple volfile servers to the gluster
block backend of QEMU with tcp|rdma transport types and their port numbers.
Problem:
Currently VM Image on gluster volume is specified like this:
file=gluster[+tcp]://host[:port]/testvol/a.img
Assuming we have three hosts in trusted pool with replica 3 volume
in action and unfortunately host (mentioned in the command above) went down
for some reason, since the volume is replica 3 we now have other 2 hosts
active from which we can boot the VM.
But currently there is no mechanism to pass the other 2 gluster host
addresses to qemu.
Solution:
New way of specifying VM Image on gluster volume with volfile servers:
(We still support old syntax to maintain backward compatibility)
Basic command line syntax looks like:
Pattern I:
-drive driver=gluster,
volume=testvol,path=/path/a.raw,
servers.0.host=1.2.3.4,
[servers.0.port=24007,]
[servers.0.transport=tcp,]
servers.1.host=5.6.7.8,
[servers.1.port=24008,]
[servers.1.transport=rdma,] ...
Pattern II:
'json:{"driver":"qcow2","file":{"driver":"gluster",
"volume":"testvol","path":"/path/a.qcow2",
"servers":[{tuple0},{tuple1}, ...{tupleN}]}}'
driver => 'gluster' (protocol name)
volume => name of gluster volume where our VM image resides
path => absolute path of image in gluster volume
{tuple} => {"host":"1.2.3.4"[,"port":"24007","transport":"tcp"]}
host => host address (hostname/ipv4/ipv6 addresses)
port => port number on which glusterd is listening. (default 24007)
transport => transport type used to connect to gluster management daemon,
it can be tcp|rdma (default 'tcp')
Examples:
1.
-drive driver=qcow2,file.driver=gluster,
file.volume=testvol,file.path=/path/a.qcow2,
file.servers.0.host=1.2.3.4,
file.servers.0.port=24007,
file.servers.0.transport=tcp,
file.servers.1.host=5.6.7.8,
file.servers.1.port=24008,
file.servers.1.transport=rdma
2.
'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
"path":"/path/a.qcow2","servers":
[{"host":"1.2.3.4","port":"24007","transport":"tcp"},
{"host":"4.5.6.7","port":"24008","transport":"rdma"}] } }'
This patch gives a mechanism to provide all the server addresses, which are in
replica set, so in case host1 is down VM can still boot from any of the
active hosts.
This is equivalent to the backup-volfile-servers option supported by
mount.glusterfs (FUSE way of mounting gluster volume)
This patch depends on a recent fix in libgfapi raised as part of this work:
http://review.gluster.org/#/c/12114/
Credits: Sincere thanks to Kevin Wolf <kwolf@redhat.com> and
"Deepak C Shetty" <deepakcs@redhat.com> for inputs and all their support
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
---
v1:
multiple host addresses but common port number and transport type
pattern: URI syntax with query (?) delimitor
syntax:
file=gluster[+transport-type]://host1:24007/testvol/a.img\
?servers=host2&servers=host3
v2:
multiple host addresses each have their own port number, but all use
common transport type
pattern: URI syntax with query (?) delimiter
syntax:
file=gluster[+transport-type]://[host[:port]]/testvol/a.img\
[?servers=host1[:port]\
&servers=host2[:port]]
v3:
multiple host addresses each have their own port number and transport type
pattern: changed to json
syntax:
'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
"path":"/path/a.qcow2","servers":
[{"host":"1.2.3.4","port":"24007","transport":"tcp"},
{"host":"4.5.6.7","port":"24008","transport":"rdma"}] } }'
v4, v5:
address comments from "Eric Blake" <eblake@redhat.com>
renamed:
'backup-volfile-servers' -> 'volfile-servers'
v6:
address comments from Peter Krempa <pkrempa@redhat.com>
renamed:
'volname' -> 'volume'
'image-path' -> 'path'
'server' -> 'host'
v7:
fix for v6 (initialize num_servers to 1 and other typos)
v8:
split patch set v7 into series of 3 as per Peter Krempa <pkrempa@redhat.com>
review comments
v9:
reorder the series of patches addressing "Eric Blake" <eblake@redhat.com>
review comments
v10:
fix mem-leak as per Peter Krempa <pkrempa@redhat.com> review comments
v11:
using qapi-types* defined structures as per "Eric Blake" <eblake@redhat.com>
review comments.
v12:
fix crash caused in qapi_free_BlockdevOptionsGluster
---
block/gluster.c | 460 ++++++++++++++++++++++++++++++++++++++++++++-------
qapi/block-core.json | 64 ++++++-
2 files changed, 455 insertions(+), 69 deletions(-)
diff --git a/block/gluster.c b/block/gluster.c
index ededda2..2b944e6 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -11,6 +11,16 @@
#include "block/block_int.h"
#include "qemu/uri.h"
+#define GLUSTER_OPT_FILENAME "filename"
+#define GLUSTER_OPT_VOLUME "volume"
+#define GLUSTER_OPT_PATH "path"
+#define GLUSTER_OPT_HOST "host"
+#define GLUSTER_OPT_PORT "port"
+#define GLUSTER_OPT_TRANSPORT "transport"
+#define GLUSTER_OPT_SERVERS_PATTERN "servers."
+
+#define GLUSTER_DEFAULT_PORT 24007
+
typedef struct GlusterAIOCB {
int64_t size;
int ret;
@@ -29,15 +39,6 @@ typedef struct BDRVGlusterReopenState {
struct glfs_fd *fd;
} BDRVGlusterReopenState;
-typedef struct GlusterConf {
- char *host;
- int port;
- char *volume;
- char *path;
- char *transport;
-} GlusterConf;
-
-
static QemuOptsList qemu_gluster_create_opts = {
.name = "qemu-gluster-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(qemu_gluster_create_opts.head),
@@ -61,7 +62,7 @@ static QemuOptsList runtime_opts = {
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
- .name = "filename",
+ .name = GLUSTER_OPT_FILENAME,
.type = QEMU_OPT_STRING,
.help = "URL to the gluster image",
},
@@ -69,19 +70,48 @@ static QemuOptsList runtime_opts = {
},
};
+static QemuOptsList runtime_json_opts = {
+ .name = "gluster_json",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_json_opts.head),
+ .desc = {
+ {
+ .name = GLUSTER_OPT_VOLUME,
+ .type = QEMU_OPT_STRING,
+ .help = "name of gluster volume where VM image resides",
+ },
+ {
+ .name = GLUSTER_OPT_PATH,
+ .type = QEMU_OPT_STRING,
+ .help = "absolute path to image file in gluster volume",
+ },
+ { /* end of list */ }
+ },
+};
-static void qemu_gluster_gconf_free(GlusterConf *gconf)
-{
- if (gconf) {
- g_free(gconf->host);
- g_free(gconf->volume);
- g_free(gconf->path);
- g_free(gconf->transport);
- g_free(gconf);
- }
-}
+static QemuOptsList runtime_tuple_opts = {
+ .name = "gluster_tuple",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_tuple_opts.head),
+ .desc = {
+ {
+ .name = GLUSTER_OPT_HOST,
+ .type = QEMU_OPT_STRING,
+ .help = "host address (hostname/ipv4/ipv6 addresses)",
+ },
+ {
+ .name = GLUSTER_OPT_PORT,
+ .type = QEMU_OPT_NUMBER,
+ .help = "port number on which glusterd is listening (default 24007)",
+ },
+ {
+ .name = GLUSTER_OPT_TRANSPORT,
+ .type = QEMU_OPT_STRING,
+ .help = "transport type 'tcp' or 'rdma' (default 'tcp')",
+ },
+ { /* end of list */ }
+ },
+};
-static int parse_volume_options(GlusterConf *gconf, char *path)
+static int parse_volume_options(BlockdevOptionsGluster *gconf, char *path)
{
char *p, *q;
@@ -143,8 +173,11 @@ static int parse_volume_options(GlusterConf *gconf, char *path)
* file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
* file=gluster+rdma://1.2.3.4:24007/testvol/a.img
*/
-static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename)
+static int qemu_gluster_parseuri(BlockdevOptionsGluster **pgconf,
+ const char *filename)
{
+ BlockdevOptionsGluster *gconf;
+ GlusterServer *gsconf;
URI *uri;
QueryParams *qp = NULL;
bool is_unix = false;
@@ -155,20 +188,24 @@ static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename)
return -EINVAL;
}
+ gconf = g_new0(BlockdevOptionsGluster, 1);
+ gsconf = g_new0(GlusterServer, 1);
+
/* transport */
if (!uri->scheme || !strcmp(uri->scheme, "gluster")) {
- gconf->transport = g_strdup("tcp");
+ gsconf->transport = GLUSTER_TRANSPORT_TCP;
} else if (!strcmp(uri->scheme, "gluster+tcp")) {
- gconf->transport = g_strdup("tcp");
+ gsconf->transport = GLUSTER_TRANSPORT_TCP;
} else if (!strcmp(uri->scheme, "gluster+unix")) {
- gconf->transport = g_strdup("unix");
+ gsconf->transport = GLUSTER_TRANSPORT_UNIX;
is_unix = true;
} else if (!strcmp(uri->scheme, "gluster+rdma")) {
- gconf->transport = g_strdup("rdma");
+ gsconf->transport = GLUSTER_TRANSPORT_RDMA;
} else {
ret = -EINVAL;
goto out;
}
+ gsconf->has_transport = true;
ret = parse_volume_options(gconf, uri->path);
if (ret < 0) {
@@ -190,13 +227,27 @@ static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename)
ret = -EINVAL;
goto out;
}
- gconf->host = g_strdup(qp->p[0].value);
+ gsconf->host = g_strdup(qp->p[0].value);
} else {
- gconf->host = g_strdup(uri->server ? uri->server : "localhost");
- gconf->port = uri->port;
+ gsconf->host = g_strdup(uri->server ? uri->server : "localhost");
+ if (uri->port) {
+ gsconf->port = uri->port;
+ } else {
+ gsconf->port = GLUSTER_DEFAULT_PORT;
+ }
+ gsconf->has_port = true;
}
+ gconf->servers = g_new0(GlusterServerList, 1);
+ gconf->servers->value = gsconf;
+ gconf->servers->next = NULL;
+
+ *pgconf = gconf;
+
out:
+ if (ret < 0) {
+ qapi_free_BlockdevOptionsGluster(gconf);
+ }
if (qp) {
query_params_free(qp);
}
@@ -204,30 +255,26 @@ out:
return ret;
}
-static struct glfs *qemu_gluster_init(GlusterConf *gconf, const char *filename,
- Error **errp)
+static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
+ Error **errp)
{
- struct glfs *glfs = NULL;
+ struct glfs *glfs;
int ret;
int old_errno;
-
- ret = qemu_gluster_parseuri(gconf, filename);
- if (ret < 0) {
- error_setg(errp, "Usage: file=gluster[+transport]://[host[:port]]/"
- "volume/path[?socket=...]");
- errno = -ret;
- goto out;
- }
+ GlusterServerList *server;
glfs = glfs_new(gconf->volume);
if (!glfs) {
goto out;
}
- ret = glfs_set_volfile_server(glfs, gconf->transport, gconf->host,
- gconf->port);
- if (ret < 0) {
- goto out;
+ for (server = gconf->servers; server != NULL; server = server->next) {
+ ret = glfs_set_volfile_server(glfs,
+ GlusterTransport_lookup[server->value->transport],
+ server->value->host, server->value->port);
+ if (ret < 0) {
+ goto out;
+ }
}
/*
@@ -242,10 +289,9 @@ static struct glfs *qemu_gluster_init(GlusterConf *gconf, const char *filename,
ret = glfs_init(glfs);
if (ret) {
error_setg_errno(errp, errno,
- "Gluster connection failed for host=%s port=%d "
- "volume=%s path=%s transport=%s", gconf->host,
- gconf->port, gconf->volume, gconf->path,
- gconf->transport);
+ "Error: Gluster connection failed for given hosts "
+ "volume:'%s' path:'%s' host1: %s", gconf->volume,
+ gconf->path, gconf->servers->value->host);
/* glfs_init sometimes doesn't set errno although docs suggest that */
if (errno == 0)
@@ -264,6 +310,295 @@ out:
return NULL;
}
+static int parse_transport_option(const char *opt)
+{
+ int i;
+
+ if (!opt) {
+ /* Set tcp as default */
+ return GLUSTER_TRANSPORT_TCP;
+ }
+
+ for (i = 0; i < GLUSTER_TRANSPORT_MAX; i++) {
+ if (!strcmp(opt, GlusterTransport_lookup[i])) {
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+*
+* Basic command line syntax looks like:
+*
+* Pattern I:
+* -drive driver=gluster,
+* volume=testvol,file.path=/path/a.raw,
+* servers.0.host=1.2.3.4,
+* [servers.0.port=24007,]
+* [servers.0.transport=tcp,]
+* servers.1.host=5.6.7.8,
+* [servers.1.port=24008,]
+* [servers.1.transport=rdma,] ...
+*
+* Pattern II:
+* 'json:{"driver":"qcow2","file":{"driver":"gluster",
+* "volume":"testvol","path":"/path/a.qcow2",
+* "servers":[{tuple0},{tuple1}, ...{tupleN}]}}'
+*
+*
+* driver => 'gluster' (protocol name)
+* volume => name of gluster volume where VM image resides
+* path => absolute path of image in gluster volume
+*
+* {tuple} => {"host":"1.2.3.4"[,"port":"24007","transport":"tcp"]}
+*
+* host => host address (hostname/ipv4/ipv6 addresses)
+* port => port number on which glusterd is listening (default 24007)
+* tranport => transport type used to connect to gluster management daemon,
+* it can be tcp|rdma (default 'tcp')
+*
+*
+* Examples:
+* Pattern I:
+* -drive driver=qcow2,file.driver=gluster,
+* file.volume=testvol,file.path=/path/a.qcow2,
+* file.servers.0.host=1.2.3.4,
+* file.servers.0.port=24007,
+* file.servers.0.transport=tcp,
+* file.servers.1.host=5.6.7.8,
+* file.servers.1.port=24008,
+* file.servers.1.transport=rdma, ...
+*
+* -drive driver=qcow2,file.driver=gluster,
+* file.volume=testvol,file.path=/path/a.qcow2,
+* file.servers.0.host=1.2.3.4,
+* file.servers.1.host=5.6.7.8, ...
+*
+* -drive driver=qcow2,file.driver=gluster,
+* file.volume=testvol,file.path=/path/a.qcow2,
+* file.servers.0.host=1.2.3.4,
+* file.servers.0.port=24007,
+* file.servers.1.host=5.6.7.8,
+* file.servers.1.port=24008, ...
+*
+* -drive driver=qcow2,file.driver=gluster,
+* file.volume=testvol,file.path=/path/a.qcow2,
+* file.servers.0.host=1.2.3.4,
+* file.servers.0.transport=tcp,
+* file.servers.1.host=5.6.7.8,
+* file.servers.1.transport=rdma, ...
+*
+* Pattern II:
+* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
+* "path":"/path/a.qcow2","servers":
+* [{"host":"1.2.3.4","port":"24007","transport":"tcp"},
+* {"host":"4.5.6.7","port":"24008","transport":"rdma"}, ...]}}'
+*
+* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
+* "path":"/path/a.qcow2","servers":
+* [{"host":"1.2.3.4"},
+* {"host":"4.5.6.7"}, ...]}}'
+*
+*
+* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
+* "path":"/path/a.qcow2","servers":
+* [{"host":"1.2.3.4","port":"24007"},
+* {"host":"4.5.6.7","port":"24008"}, ...]}}'
+*
+*
+* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
+* "path":"/path/a.qcow2","servers":
+* [{"host":"1.2.3.4","transport":"tcp"},
+* {"host":"4.5.6.7","transport":"rdma"}, ...]}}'
+*
+* Just for better readability pattern II is kept as:
+* json:
+* {
+* "driver":"qcow2",
+* "file":{
+* "driver":"gluster",
+* "volume":"testvol",
+* "path":"/path/a.qcow2",
+* "servers":[
+* {
+* "host":"1.2.3.4",
+* "port":"24007",
+* "transport":"tcp"
+* },
+* {
+* "host":"5.6.7.8",
+* "port":"24008",
+* "transport":"rdma"
+* }
+* ]
+* }
+* }
+*
+*/
+static int qemu_gluster_parsejson(BlockdevOptionsGluster **pgconf,
+ QDict *options)
+{
+ QemuOpts *opts;
+ BlockdevOptionsGluster *gconf;
+ GlusterServer *gsconf;
+ GlusterServerList **prev;
+ GlusterServerList *curr;
+ QDict *backing_options = NULL;
+ Error *local_err = NULL;
+ char *str;
+ const char *ptr;
+ size_t num_servers;
+ int i;
+
+ /* create opts info from runtime_json_opts list */
+ opts = qemu_opts_create(&runtime_json_opts, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ gconf = g_new0(BlockdevOptionsGluster, 1);
+ num_servers = qdict_array_entries(options, GLUSTER_OPT_SERVERS_PATTERN);
+ if (num_servers < 1) {
+ error_setg(&local_err, "Error: qemu_gluster: please provide 'servers' "
+ "option with valid fields in array of tuples");
+ goto out;
+ }
+
+ ptr = qemu_opt_get(opts, GLUSTER_OPT_VOLUME);
+ if (!ptr) {
+ error_setg(&local_err, "Error: qemu_gluster: please provide 'volume' "
+ "option");
+ goto out;
+ }
+ gconf->volume = g_strdup(ptr);
+
+ ptr = qemu_opt_get(opts, GLUSTER_OPT_PATH);
+ if (!ptr) {
+ error_setg(&local_err, "Error: qemu_gluster: please provide 'path' "
+ "option");
+ goto out;
+ }
+ gconf->path = g_strdup(ptr);
+
+ qemu_opts_del(opts);
+
+ /* create opts info from runtime_tuple_opts list */
+ str = g_malloc(40);
+ for (i = 0; i < num_servers; i++) {
+ opts = qemu_opts_create(&runtime_tuple_opts, NULL, 0, &error_abort);
+ g_assert(sprintf(str, GLUSTER_OPT_SERVERS_PATTERN"%d.", i) <= 40);
+ qdict_extract_subqdict(options, &backing_options, str);
+ qemu_opts_absorb_qdict(opts, backing_options, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ qdict_del(backing_options, str);
+
+ ptr = qemu_opt_get(opts, GLUSTER_OPT_HOST);
+ if (!ptr) {
+ error_setg(&local_err, "Error: qemu_gluster: servers.{tuple.%d} "
+ "requires 'host' option", i);
+ goto out;
+ }
+
+ gsconf = g_new0(GlusterServer, 1);
+
+ gsconf->host = g_strdup(ptr);
+
+ ptr = qemu_opt_get(opts, GLUSTER_OPT_TRANSPORT);
+ /* check whether transport type specified in json command is valid */
+ if (parse_transport_option(ptr) < 0) {
+ error_setg(&local_err, "Error: qemu_gluster: please set 'transport'"
+ " type in tuple.%d as tcp or rdma", i);
+ goto out;
+ }
+ /* only if valid transport i.e. either of tcp|rdma is specified */
+ gsconf->transport = parse_transport_option(ptr);
+ gsconf->has_transport = true;
+
+ gsconf->port = qemu_opt_get_number(opts, GLUSTER_OPT_PORT,
+ GLUSTER_DEFAULT_PORT);
+ gsconf->has_port = true;
+
+ if (gconf->servers == NULL) {
+ gconf->servers = g_new0(GlusterServerList, 1);
+ gconf->servers->value = gsconf;
+ curr = gconf->servers;
+ } else {
+ prev = &curr->next;
+ curr = g_new0(GlusterServerList, 1);
+ curr->value = gsconf;
+ *prev = curr;
+ }
+ curr->next = NULL;
+
+ qemu_opts_del(opts);
+ }
+
+ *pgconf = gconf;
+ g_free(str);
+ return 0;
+
+out:
+ error_report_err(local_err);
+ qapi_free_BlockdevOptionsGluster(gconf);
+ qemu_opts_del(opts);
+ if (str) {
+ qdict_del(backing_options, str);
+ g_free(str);
+ }
+ errno = EINVAL;
+ return -errno;
+}
+
+static struct glfs *qemu_gluster_init(BlockdevOptionsGluster **gconf,
+ const char *filename,
+ QDict *options, Error **errp)
+{
+ int ret;
+
+ if (filename) {
+ ret = qemu_gluster_parseuri(gconf, filename);
+ if (ret < 0) {
+ error_setg(errp, "Usage: file=gluster[+transport]://[host[:port]]/"
+ "volume/path[?socket=...]");
+ errno = -ret;
+ return NULL;
+ }
+ } else {
+ ret = qemu_gluster_parsejson(gconf, options);
+ if (ret < 0) {
+ error_setg(errp, "Wrong Usage.");
+ error_append_hint(errp,
+ "Usage1: "
+ "-drive driver=qcow2,file.driver=gluster,"
+ "file.volume=testvol,file.path=/path/a.qcow2,"
+ "file.servers.0.host=1.2.3.4,"
+ "[file.servers.0.port=24007,]"
+ "[file.servers.0.transport=tcp,]"
+ "file.servers.1.host=5.6.7.8,"
+ "[file.servers.1.port=24008,]"
+ "[file.servers.1.transport=rdma,] ...");
+ error_append_hint(errp,
+ "\nUsage2: "
+ "'json:{\"driver\":\"qcow2\",\"file\":"
+ "{\"driver\":\"gluster\",\"volume\":\""
+ "testvol\",\"path\":\"/path/a.qcow2\","
+ "\"servers\":[{\"host\":\"1.2.3.4\","
+ "\"port\":\"24007\",\"transport\":\"tcp\"},"
+ "{\"host\":\"4.5.6.7\",\"port\":\"24007\","
+ "\"transport\":\"rdma\"}, ...]}}'");
+ errno = -ret;
+ return NULL;
+ }
+ }
+
+ return qemu_gluster_glfs_init(*gconf, errp);
+}
+
static void qemu_gluster_complete_aio(void *opaque)
{
GlusterAIOCB *acb = (GlusterAIOCB *)opaque;
@@ -315,7 +650,7 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
BDRVGlusterState *s = bs->opaque;
int open_flags = 0;
int ret = 0;
- GlusterConf *gconf = g_new0(GlusterConf, 1);
+ BlockdevOptionsGluster *gconf = NULL;
QemuOpts *opts;
Error *local_err = NULL;
const char *filename;
@@ -329,8 +664,7 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
}
filename = qemu_opt_get(opts, "filename");
-
- s->glfs = qemu_gluster_init(gconf, filename, errp);
+ s->glfs = qemu_gluster_init(&gconf, filename, options, errp);
if (!s->glfs) {
ret = -errno;
goto out;
@@ -345,7 +679,7 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
out:
qemu_opts_del(opts);
- qemu_gluster_gconf_free(gconf);
+ qapi_free_BlockdevOptionsGluster(gconf);
if (!ret) {
return ret;
}
@@ -363,7 +697,7 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
{
int ret = 0;
BDRVGlusterReopenState *reop_s;
- GlusterConf *gconf = NULL;
+ BlockdevOptionsGluster *gconf = NULL;
int open_flags = 0;
assert(state != NULL);
@@ -374,9 +708,7 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
qemu_gluster_parse_flags(state->flags, &open_flags);
- gconf = g_new0(GlusterConf, 1);
-
- reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, errp);
+ reop_s->glfs = qemu_gluster_init(&gconf, state->bs->filename, NULL, errp);
if (reop_s->glfs == NULL) {
ret = -errno;
goto exit;
@@ -391,7 +723,7 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
exit:
/* state->opaque will be freed in either the _abort or _commit */
- qemu_gluster_gconf_free(gconf);
+ qapi_free_BlockdevOptionsGluster(gconf);
return ret;
}
@@ -500,15 +832,15 @@ static inline int qemu_gluster_zerofill(struct glfs_fd *fd, int64_t offset,
static int qemu_gluster_create(const char *filename,
QemuOpts *opts, Error **errp)
{
+ BlockdevOptionsGluster *gconf = NULL;
struct glfs *glfs;
struct glfs_fd *fd;
int ret = 0;
int prealloc = 0;
int64_t total_size = 0;
char *tmp = NULL;
- GlusterConf *gconf = g_new0(GlusterConf, 1);
- glfs = qemu_gluster_init(gconf, filename, errp);
+ glfs = qemu_gluster_init(&gconf, filename, NULL, errp);
if (!glfs) {
ret = -errno;
goto out;
@@ -523,7 +855,7 @@ static int qemu_gluster_create(const char *filename,
} else if (!strcmp(tmp, "full") && gluster_supports_zerofill()) {
prealloc = 1;
} else {
- error_setg(errp, "Invalid preallocation mode: '%s'"
+ error_setg(errp, "Error: Invalid preallocation mode: '%s'"
" or GlusterFS doesn't support zerofill API", tmp);
ret = -EINVAL;
goto out;
@@ -548,7 +880,7 @@ static int qemu_gluster_create(const char *filename,
}
out:
g_free(tmp);
- qemu_gluster_gconf_free(gconf);
+ qapi_free_BlockdevOptionsGluster(gconf);
if (glfs) {
glfs_fini(glfs);
}
@@ -725,7 +1057,7 @@ static BlockDriver bdrv_gluster = {
.format_name = "gluster",
.protocol_name = "gluster",
.instance_size = sizeof(BDRVGlusterState),
- .bdrv_needs_filename = true,
+ .bdrv_needs_filename = false,
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
@@ -752,7 +1084,7 @@ static BlockDriver bdrv_gluster_tcp = {
.format_name = "gluster",
.protocol_name = "gluster+tcp",
.instance_size = sizeof(BDRVGlusterState),
- .bdrv_needs_filename = true,
+ .bdrv_needs_filename = false,
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
@@ -806,7 +1138,7 @@ static BlockDriver bdrv_gluster_rdma = {
.format_name = "gluster",
.protocol_name = "gluster+rdma",
.instance_size = sizeof(BDRVGlusterState),
- .bdrv_needs_filename = true,
+ .bdrv_needs_filename = false,
.bdrv_file_open = qemu_gluster_open,
.bdrv_reopen_prepare = qemu_gluster_reopen_prepare,
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
diff --git a/qapi/block-core.json b/qapi/block-core.json
index bb2189e..3515d68 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1375,15 +1375,16 @@
#
# @host_device, @host_cdrom, @host_floppy: Since 2.1
# @host_floppy: deprecated since 2.3
+# @gluster: Since 2.5
#
# Since: 2.0
##
{ 'enum': 'BlockdevDriver',
'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop',
- 'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
- 'host_floppy', 'http', 'https', 'null-aio', 'null-co', 'parallels',
- 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx',
- 'vmdk', 'vpc', 'vvfat' ] }
+ 'dmg', 'file', 'ftp', 'ftps', 'gluster', 'host_cdrom',
+ 'host_device', 'host_floppy', 'http', 'https', 'null-aio',
+ 'null-co', 'parallels', 'qcow', 'qcow2', 'qed', 'quorum', 'raw',
+ 'tftp', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
##
# @BlockdevOptionsBase
@@ -1794,6 +1795,59 @@
'*read-pattern': 'QuorumReadPattern' } }
##
+# @GlusterTransport
+#
+# An enumeration of Gluster transport type
+#
+# @tcp: TCP - Transmission Control Protocol
+#
+# @unix: UNIX - Unix domain socket
+#
+# @rdma: RDMA - Remote direct memory access
+#
+# Since: 2.5
+##
+{ 'enum': 'GlusterTransport', 'data': [ 'tcp', 'unix', 'rdma'] }
+
+##
+# @GlusterServer
+#
+# Gluster tuple set
+#
+# @host: host address (hostname/ipv4/ipv6 addresses)
+#
+# @port: #optional port number on which glusterd is listening
+# (default 24007)
+#
+# @transport: #optional transport type used to connect to gluster management
+# daemon (default 'tcp')
+#
+# Since: 2.5
+##
+{ 'struct': 'GlusterServer',
+ 'data': { 'host': 'str',
+ '*port': 'int',
+ '*transport': 'GlusterTransport' } }
+
+##
+# @BlockdevOptionsGluster
+#
+# Driver specific block device options for Gluster
+#
+# @volume: name of gluster volume where VM image resides
+#
+# @path: absolute path to image file in gluster volume
+#
+# @servers: one or more gluster server descriptions (host, port, and transport)
+#
+# Since: 2.5
+##
+{ 'struct': 'BlockdevOptionsGluster',
+ 'data': { 'volume': 'str',
+ 'path': 'str',
+ 'servers': [ 'GlusterServer' ] } }
+
+##
# @BlockdevOptions
#
# Options for creating a block device.
@@ -1813,7 +1867,7 @@
'file': 'BlockdevOptionsFile',
'ftp': 'BlockdevOptionsFile',
'ftps': 'BlockdevOptionsFile',
-# TODO gluster: Wait for structured options
+ 'gluster': 'BlockdevOptionsGluster',
'host_cdrom': 'BlockdevOptionsFile',
'host_device':'BlockdevOptionsFile',
'host_floppy':'BlockdevOptionsFile',
--
2.1.0
^ permalink raw reply related [flat|nested] 3+ messages in thread