qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: amit.shah@redhat.com, dgilbert@redhat.com
Subject: [Qemu-devel] [PULL 34/57] Postcopy: Maintain unsentmap
Date: Mon,  9 Nov 2015 18:28:38 +0100	[thread overview]
Message-ID: <1447090141-29074-35-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1447090141-29074-1-git-send-email-quintela@redhat.com>

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

Maintain an 'unsentmap' of pages that have yet to be sent.
This is used in the following patches to discard some set of
the pages already sent as we enter postcopy mode.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 migration/ram.c | 51 +++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 6 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index 4053ca1..c703176 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -237,7 +237,14 @@ typedef struct PageSearchStatus PageSearchStatus;

 static struct BitmapRcu {
     struct rcu_head rcu;
+    /* Main migration bitmap */
     unsigned long *bmap;
+    /* bitmap of pages that haven't been sent even once
+     * only maintained and used in postcopy at the moment
+     * where it's used to send the dirtymap at the start
+     * of the postcopy phase
+     */
+    unsigned long *unsentmap;
 } *migration_bitmap_rcu;

 struct CompressParam {
@@ -531,10 +538,18 @@ static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
     return 1;
 }

-/* Called with rcu_read_lock() to protect migration_bitmap */
+/* Called with rcu_read_lock() to protect migration_bitmap
+ * rb: The RAMBlock  to search for dirty pages in
+ * start: Start address (typically so we can continue from previous page)
+ * ram_addr_abs: Pointer into which to store the address of the dirty page
+ *               within the global ram_addr space
+ *
+ * Returns: byte offset within memory region of the start of a dirty page
+ */
 static inline
 ram_addr_t migration_bitmap_find_and_reset_dirty(RAMBlock *rb,
-                                                 ram_addr_t start)
+                                                 ram_addr_t start,
+                                                 ram_addr_t *ram_addr_abs)
 {
     unsigned long base = rb->offset >> TARGET_PAGE_BITS;
     unsigned long nr = base + (start >> TARGET_PAGE_BITS);
@@ -555,6 +570,7 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(RAMBlock *rb,
         clear_bit(next, bitmap);
         migration_dirty_pages--;
     }
+    *ram_addr_abs = next << TARGET_PAGE_BITS;
     return (next - base) << TARGET_PAGE_BITS;
 }

@@ -953,10 +969,11 @@ static int ram_save_compressed_page(QEMUFile *f, RAMBlock *block,
  * @*again: Set to false if the search has scanned the whole of RAM
  */
 static bool find_dirty_block(QEMUFile *f, PageSearchStatus *pss,
-                             bool *again)
+                             bool *again, ram_addr_t *ram_addr_abs)
 {
     pss->offset = migration_bitmap_find_and_reset_dirty(pss->block,
-                                                       pss->offset);
+                                                       pss->offset,
+                                                       ram_addr_abs);
     if (pss->complete_round && pss->block == last_seen_block &&
         pss->offset >= last_offset) {
         /*
@@ -1014,6 +1031,8 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
     PageSearchStatus pss;
     int pages = 0;
     bool again, found;
+    ram_addr_t dirty_ram_abs; /* Address of the start of the dirty page in
+                                 ram_addr_t space */

     pss.block = last_seen_block;
     pss.offset = last_offset;
@@ -1024,7 +1043,7 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
     }

     do {
-        found = find_dirty_block(f, &pss, &again);
+        found = find_dirty_block(f, &pss, &again, &dirty_ram_abs);

         if (found) {
             if (compression_switch && migrate_use_compression()) {
@@ -1038,7 +1057,14 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage,

             /* if page is unmodified, continue to the next */
             if (pages > 0) {
+                unsigned long *unsentmap;
+
+                unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
                 last_sent_block = pss.block;
+                if (unsentmap) {
+                    clear_bit(dirty_ram_abs >> TARGET_PAGE_BITS, unsentmap);
+                }
+
             }
         }
     } while (!pages && again);
@@ -1097,6 +1123,7 @@ void free_xbzrle_decoded_buf(void)
 static void migration_bitmap_free(struct BitmapRcu *bmap)
 {
     g_free(bmap->bmap);
+    g_free(bmap->unsentmap);
     g_free(bmap);
 }

@@ -1153,6 +1180,13 @@ void migration_bitmap_extend(ram_addr_t old, ram_addr_t new)
         qemu_mutex_lock(&migration_bitmap_mutex);
         bitmap_copy(bitmap->bmap, old_bitmap->bmap, old);
         bitmap_set(bitmap->bmap, old, new - old);
+
+        /* We don't have a way to safely extend the sentmap
+         * with RCU; so mark it as missing, entry to postcopy
+         * will fail.
+         */
+        bitmap->unsentmap = NULL;
+
         atomic_rcu_set(&migration_bitmap_rcu, bitmap);
         qemu_mutex_unlock(&migration_bitmap_mutex);
         migration_dirty_pages += new - old;
@@ -1253,10 +1287,15 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
     reset_ram_globals();

     ram_bitmap_pages = last_ram_offset() >> TARGET_PAGE_BITS;
-    migration_bitmap_rcu = g_new(struct BitmapRcu, 1);
+    migration_bitmap_rcu = g_new0(struct BitmapRcu, 1);
     migration_bitmap_rcu->bmap = bitmap_new(ram_bitmap_pages);
     bitmap_set(migration_bitmap_rcu->bmap, 0, ram_bitmap_pages);

+    if (migrate_postcopy_ram()) {
+        migration_bitmap_rcu->unsentmap = bitmap_new(ram_bitmap_pages);
+        bitmap_set(migration_bitmap_rcu->unsentmap, 0, ram_bitmap_pages);
+    }
+
     /*
      * Count the total number of pages used by ram blocks not including any
      * gaps due to alignment or unplugs.
-- 
2.5.0

  parent reply	other threads:[~2015-11-09 17:30 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-09 17:28 [Qemu-devel] [PULL 00/57] Migration pull Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 01/57] Add postcopy documentation Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 02/57] Provide runtime Target page information Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 03/57] Move configuration section writing Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 04/57] Move page_size_init earlier Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 05/57] qemu_ram_block_from_host Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 06/57] qemu_ram_block_by_name Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 07/57] Rename mis->file to from_src_file Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 08/57] Add qemu_get_buffer_in_place to avoid copies some of the time Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 09/57] Add wrapper for setting blocking status on a QEMUFile Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 10/57] Add QEMU_MADV_NOHUGEPAGE Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 11/57] ram_debug_dump_bitmap: Dump a migration bitmap as text Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 12/57] ram_load: Factor out host_from_stream_offset call and check Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 13/57] migrate_init: Call from savevm Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 14/57] Rename save_live_complete to save_live_complete_precopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 15/57] Add Linux userfaultfd.h header Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 16/57] Return path: Open a return path on QEMUFile for sockets Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 17/57] Return path: socket_writev_buffer: Block even on non-blocking fd's Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 18/57] Migration commands Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 19/57] Return path: Control commands Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 20/57] Return path: Send responses from destination to source Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 21/57] migration_is_setup_or_active Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 22/57] Return path: Source handling of return path Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 23/57] Rework loadvm path for subloops Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 24/57] Add migration-capability boolean for postcopy-ram Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 25/57] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 26/57] MIG_CMD_PACKAGED: Send a packaged chunk of migration stream Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 27/57] Modify save_live_pending for postcopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 28/57] postcopy: OS support test Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 29/57] migrate_start_postcopy: Command to trigger transition to postcopy Juan Quintela
2015-11-09 22:19   ` Eric Blake
2015-11-10 10:38     ` Dr. David Alan Gilbert
2015-11-10 16:36       ` Eric Blake
2015-11-09 17:28 ` [Qemu-devel] [PULL 30/57] migration_completion: Take current state Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 31/57] MIGRATION_STATUS_POSTCOPY_ACTIVE: Add new migration state Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 32/57] Avoid sending vmdescription during postcopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 33/57] Add qemu_savevm_state_complete_postcopy Juan Quintela
2015-11-09 17:28 ` Juan Quintela [this message]
2015-11-09 17:28 ` [Qemu-devel] [PULL 35/57] migration_completion: Take current state Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 36/57] postcopy: Incoming initialisation Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 37/57] postcopy: ram_enable_notify to switch on userfault Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 38/57] Postcopy: Postcopy startup in migration thread Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 39/57] Postcopy: End of iteration Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 40/57] Page request: Add MIG_RP_MSG_REQ_PAGES reverse command Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 41/57] Page request: Process incoming page request Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 42/57] Page request: Consume pages off the post-copy queue Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 43/57] postcopy_ram.c: place_page and helpers Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 44/57] Postcopy: Use helpers to map pages during migration Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 45/57] postcopy: Check order of received target pages Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 46/57] Don't sync dirty bitmaps in postcopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 47/57] Don't iterate on precopy-only devices during postcopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 48/57] Host page!=target page: Cleanup bitmaps Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 49/57] Round up RAMBlock sizes to host page sizes Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 50/57] Postcopy; Handle userfault requests Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 51/57] Start up a postcopy/listener thread ready for incoming page data Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 52/57] postcopy: Wire up loadvm_postcopy_handle_ commands Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 53/57] Postcopy: Mark nohugepage before discard Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 54/57] End of migration for postcopy Juan Quintela
2015-11-09 17:28 ` [Qemu-devel] [PULL 55/57] Disable mlock around incoming postcopy Juan Quintela
2015-11-09 17:29 ` [Qemu-devel] [PULL 56/57] Inhibit ballooning during postcopy Juan Quintela
2015-11-09 17:29 ` [Qemu-devel] [PULL 57/57] migration: qemu_savevm_state_cleanup becomes mandatory operation Juan Quintela
2015-11-09 17:33 ` [Qemu-devel] [PULL 00/57] Migration pull Peter Maydell
2015-11-09 17:40   ` Juan Quintela
2015-11-09 17:40   ` Dr. David Alan Gilbert
2015-11-09 17:49     ` Peter Maydell
2015-11-09 17:50 ` Peter Maydell
2015-11-09 18:29   ` Juan Quintela
2015-11-09 22:36     ` Eric Blake
2015-11-10 10:53       ` Peter Maydell
2015-11-10 12:18         ` Peter Maydell
2015-11-10 12:22           ` Dr. David Alan Gilbert
2015-11-10 12:43             ` Peter Maydell
2015-11-09 18:49   ` Juan Quintela
2015-11-09 19:02   ` Markus Armbruster
  -- strict thread matches above, loose matches on Subject: below --
2015-11-10 14:24 [Qemu-devel] [PULL 00/57] Migration pull (take 2) Juan Quintela
2015-11-10 14:25 ` [Qemu-devel] [PULL 34/57] Postcopy: Maintain unsentmap Juan Quintela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447090141-29074-35-git-send-email-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=amit.shah@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).