[Qemu-devel] [PULL 0/6] Ide patches

[Qemu-devel] [PULL 0/6] Ide patches

[John Snow]

The following changes since commit 8337c6cbc37c6b2184f41bab3eaff47d5e68012a:

  Update version for v2.5.0-rc0 release (2015-11-13 17:10:36 +0000)

are available in the git repository at:

  https://github.com/jnsnow/qemu.git tags/ide-pull-request

for you to fetch changes up to 917158dc3b22924922dc1f3b9d4049a4fc83d926:

  qtest/ahci: use raw format when qemu-img is absent (2015-11-13 14:31:43 -0500)

----------------------------------------------------------------

----------------------------------------------------------------

John Snow (6):
  atapi: add byte_count_limit helper
  atapi: Prioritize unknown cmd error over BCL error
  ahci/qtest: don't use tcp sockets for migration tests
  qtest/ahci: always specify image format
  libqos: add qemu-img presence check
  qtest/ahci: use raw format when qemu-img is absent

 hw/ide/atapi.c        |  38 ++++++++++-------
 tests/ahci-test.c     | 115 +++++++++++++++++++++++++++++++++++---------------
 tests/libqos/libqos.c |  28 +++++++++---
 tests/libqos/libqos.h |   1 +
 4 files changed, 127 insertions(+), 55 deletions(-)

-- 
2.4.3

[Qemu-devel] [PULL 1/6] atapi: add byte_count_limit helper

[John Snow]

Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1447095959-10046-2-git-send-email-jsnow@redhat.com
---
 hw/ide/atapi.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index cf0b78e..42f78fb 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -170,6 +170,17 @@ void ide_atapi_io_error(IDEState *s, int ret)
     }
 }
 
+static uint16_t atapi_byte_count_limit(IDEState *s)
+{
+    uint16_t bcl;
+
+    bcl = s->lcyl | (s->hcyl << 8);
+    if (bcl == 0xffff) {
+        return 0xfffe;
+    }
+    return bcl;
+}
+
 /* The whole ATAPI transfer logic is handled in this function */
 void ide_atapi_cmd_reply_end(IDEState *s)
 {
@@ -212,12 +223,10 @@ void ide_atapi_cmd_reply_end(IDEState *s)
         } else {
             /* a new transfer is needed */
             s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
-            byte_count_limit = s->lcyl | (s->hcyl << 8);
+            byte_count_limit = atapi_byte_count_limit(s);
 #ifdef DEBUG_IDE_ATAPI
             printf("byte_count_limit=%d\n", byte_count_limit);
 #endif
-            if (byte_count_limit == 0xffff)
-                byte_count_limit--;
             size = s->packet_transfer_size;
             if (size > byte_count_limit) {
                 /* byte count limit must be even if this case */
@@ -1272,8 +1281,7 @@ void ide_atapi_cmd(IDEState *s)
      * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
     if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) {
         /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */
-        uint16_t byte_count_limit = s->lcyl | (s->hcyl << 8);
-        if (!(byte_count_limit || s->atapi_dma)) {
+        if (!(atapi_byte_count_limit(s) || s->atapi_dma)) {
             /* TODO: Move abort back into core.c and make static inline again */
             ide_abort_command(s);
             return;
-- 
2.4.3

[Qemu-devel] [PULL 2/6] atapi: Prioritize unknown cmd error over BCL error

[John Snow]

If we don't know about the command at all, we need to prioritize
that failure above the zero byte-count-limit failure.

This fixes a failure in the sparc64 NetBSD 7.0 installer bootup.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1447095959-10046-3-git-send-email-jsnow@redhat.com
---
 hw/ide/atapi.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 42f78fb..ed8bb2c 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -1195,7 +1195,7 @@ enum {
     NONDATA = 0x04,
 };
 
-static const struct {
+static const struct AtapiCmd {
     void (*handler)(IDEState *s, uint8_t *buf);
     int flags;
 } atapi_cmd_table[0x100] = {
@@ -1222,9 +1222,9 @@ static const struct {
 
 void ide_atapi_cmd(IDEState *s)
 {
-    uint8_t *buf;
+    uint8_t *buf = s->io_buffer;
+    const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
 
-    buf = s->io_buffer;
 #ifdef DEBUG_IDE_ATAPI
     {
         int i;
@@ -1235,14 +1235,14 @@ void ide_atapi_cmd(IDEState *s)
         printf("\n");
     }
 #endif
+
     /*
      * If there's a UNIT_ATTENTION condition pending, only command flagged with
      * ALLOW_UA are allowed to complete. with other commands getting a CHECK
      * condition response unless a higher priority status, defined by the drive
      * here, is pending.
      */
-    if (s->sense_key == UNIT_ATTENTION &&
-        !(atapi_cmd_table[s->io_buffer[0]].flags & ALLOW_UA)) {
+    if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
         ide_atapi_cmd_check_status(s);
         return;
     }
@@ -1253,7 +1253,7 @@ void ide_atapi_cmd(IDEState *s)
      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
      * states rely on this behavior.
      */
-    if (!(atapi_cmd_table[s->io_buffer[0]].flags & ALLOW_UA) &&
+    if (!(cmd->flags & ALLOW_UA) &&
         !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
 
         if (s->cdrom_changed == 1) {
@@ -1268,7 +1268,7 @@ void ide_atapi_cmd(IDEState *s)
     }
 
     /* Report a Not Ready condition if appropriate for the command */
-    if ((atapi_cmd_table[s->io_buffer[0]].flags & CHECK_READY) &&
+    if ((cmd->flags & CHECK_READY) &&
         (!media_present(s) || !blk_is_inserted(s->blk)))
     {
         ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
@@ -1279,7 +1279,7 @@ void ide_atapi_cmd(IDEState *s)
      * If this is a data-transferring PIO command and BCL is 0,
      * we abort at the /ATA/ level, not the ATAPI level.
      * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
-    if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) {
+    if (cmd->handler && !(cmd->flags & NONDATA)) {
         /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */
         if (!(atapi_byte_count_limit(s) || s->atapi_dma)) {
             /* TODO: Move abort back into core.c and make static inline again */
@@ -1289,8 +1289,8 @@ void ide_atapi_cmd(IDEState *s)
     }
 
     /* Execute the command */
-    if (atapi_cmd_table[s->io_buffer[0]].handler) {
-        atapi_cmd_table[s->io_buffer[0]].handler(s, buf);
+    if (cmd->handler) {
+        cmd->handler(s, buf);
         return;
     }
 
-- 
2.4.3

[Qemu-devel] [PULL 3/6] ahci/qtest: don't use tcp sockets for migration tests

[John Snow]

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447108074-20609-1-git-send-email-jsnow@redhat.com
---
 tests/ahci-test.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 59d387c..1bb7410 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -47,6 +47,7 @@
 /*** Globals ***/
 static char tmp_path[] = "/tmp/qtest.XXXXXX";
 static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX";
+static char mig_socket[] = "/tmp/qtest-migration.XXXXXX";
 static bool ahci_pedantic;
 
 /*** Function Declarations ***/
@@ -114,8 +115,11 @@ static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri)
 {
     QOSState *tmp = to->parent;
     QPCIDevice *dev = to->dev;
+    char *uri_local = NULL;
+
     if (uri == NULL) {
-        uri = "tcp:127.0.0.1:1234";
+        uri_local = g_strdup_printf("%s%s", "unix:", mig_socket);
+        uri = uri_local;
     }
 
     /* context will be 'to' after completion. */
@@ -135,6 +139,7 @@ static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri)
     from->dev = dev;
 
     verify_state(to);
+    g_free(uri_local);
 }
 
 /*** Test Setup & Teardown ***/
@@ -1105,7 +1110,7 @@ static void test_flush_retry(void)
 static void test_migrate_sanity(void)
 {
     AHCIQState *src, *dst;
-    const char *uri = "tcp:127.0.0.1:1234";
+    char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     src = ahci_boot("-m 1024 -M q35 "
                     "-hda %s ", tmp_path);
@@ -1117,6 +1122,7 @@ static void test_migrate_sanity(void)
 
     ahci_shutdown(src);
     ahci_shutdown(dst);
+    g_free(uri);
 }
 
 /**
@@ -1129,7 +1135,7 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write)
     size_t bufsize = 4096;
     unsigned char *tx = g_malloc(bufsize);
     unsigned char *rx = g_malloc0(bufsize);
-    const char *uri = "tcp:127.0.0.1:1234";
+    char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     src = ahci_boot_and_enable("-m 1024 -M q35 "
                                "-hda %s ", tmp_path);
@@ -1158,6 +1164,7 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write)
     ahci_shutdown(dst);
     g_free(rx);
     g_free(tx);
+    g_free(uri);
 }
 
 static void test_migrate_dma(void)
@@ -1251,7 +1258,7 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write)
     unsigned char *rx = g_malloc0(bufsize);
     uint64_t ptr;
     AHCICommand *cmd;
-    const char *uri = "tcp:127.0.0.1:1234";
+    char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     prepare_blkdebug_script(debug_path, "write_aio");
 
@@ -1301,6 +1308,7 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write)
     ahci_shutdown(dst);
     g_free(rx);
     g_free(tx);
+    g_free(uri);
 }
 
 static void test_migrate_halted_dma(void)
@@ -1322,7 +1330,7 @@ static void test_flush_migrate(void)
     AHCICommand *cmd;
     uint8_t px;
     const char *s;
-    const char *uri = "tcp:127.0.0.1:1234";
+    char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     prepare_blkdebug_script(debug_path, "flush_to_disk");
 
@@ -1360,6 +1368,7 @@ static void test_flush_migrate(void)
     ahci_command_free(cmd);
     ahci_shutdown(src);
     ahci_shutdown(dst);
+    g_free(uri);
 }
 
 static void test_max(void)
@@ -1626,6 +1635,11 @@ int main(int argc, char **argv)
     g_assert(fd >= 0);
     close(fd);
 
+    /* Reserve a hollow file to use as a socket for migration tests */
+    fd = mkstemp(mig_socket);
+    g_assert(fd >= 0);
+    close(fd);
+
     /* Run the tests */
     qtest_add_func("/ahci/sanity",     test_sanity);
     qtest_add_func("/ahci/pci_spec",   test_pci_spec);
@@ -1668,6 +1682,7 @@ int main(int argc, char **argv)
     /* Cleanup */
     unlink(tmp_path);
     unlink(debug_path);
+    unlink(mig_socket);
 
     return ret;
 }
-- 
2.4.3

[Qemu-devel] [PULL 4/6] qtest/ahci: always specify image format

[John Snow]

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-2-git-send-email-jsnow@redhat.com
---
 tests/ahci-test.c | 51 +++++++++++++++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 22 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 1bb7410..9bf5f2c 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -49,6 +49,7 @@ static char tmp_path[] = "/tmp/qtest.XXXXXX";
 static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX";
 static char mig_socket[] = "/tmp/qtest-migration.XXXXXX";
 static bool ahci_pedantic;
+static const char *imgfmt;
 
 /*** Function Declarations ***/
 static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port);
@@ -175,11 +176,11 @@ static AHCIQState *ahci_boot(const char *cli, ...)
         va_end(ap);
     } else {
         cli = "-drive if=none,id=drive0,file=%s,cache=writeback,serial=%s"
-            ",format=qcow2"
+            ",format=%s"
             " -M q35 "
             "-device ide-hd,drive=drive0 "
             "-global ide-hd.ver=%s";
-        s = ahci_boot(cli, tmp_path, "testdisk", "version");
+        s = ahci_boot(cli, tmp_path, "testdisk", imgfmt, "version");
     }
 
     return s;
@@ -1078,12 +1079,12 @@ static void test_flush_retry(void)
 
     prepare_blkdebug_script(debug_path, "flush_to_disk");
     ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
-                                "format=qcow2,cache=writeback,"
+                                "format=%s,cache=writeback,"
                                 "rerror=stop,werror=stop "
                                 "-M q35 "
                                 "-device ide-hd,drive=drive0 ",
                                 debug_path,
-                                tmp_path);
+                                tmp_path, imgfmt);
 
     /* Issue Flush Command and wait for error */
     port = ahci_port_select(ahci);
@@ -1113,10 +1114,10 @@ static void test_migrate_sanity(void)
     char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     src = ahci_boot("-m 1024 -M q35 "
-                    "-hda %s ", tmp_path);
+                    "-drive if=ide,file=%s,format=%s ", tmp_path, imgfmt);
     dst = ahci_boot("-m 1024 -M q35 "
-                    "-hda %s "
-                    "-incoming %s", tmp_path, uri);
+                    "-drive if=ide,file=%s,format=%s "
+                    "-incoming %s", tmp_path, imgfmt, uri);
 
     ahci_migrate(src, dst, uri);
 
@@ -1138,10 +1139,11 @@ static void ahci_migrate_simple(uint8_t cmd_read, uint8_t cmd_write)
     char *uri = g_strdup_printf("unix:%s", mig_socket);
 
     src = ahci_boot_and_enable("-m 1024 -M q35 "
-                               "-hda %s ", tmp_path);
+                               "-drive if=ide,format=%s,file=%s ",
+                               imgfmt, tmp_path);
     dst = ahci_boot("-m 1024 -M q35 "
-                    "-hda %s "
-                    "-incoming %s", tmp_path, uri);
+                    "-drive if=ide,format=%s,file=%s "
+                    "-incoming %s", imgfmt, tmp_path, uri);
 
     set_context(src->parent);
 
@@ -1197,12 +1199,12 @@ static void ahci_halted_io_test(uint8_t cmd_read, uint8_t cmd_write)
     prepare_blkdebug_script(debug_path, "write_aio");
 
     ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
-                                "format=qcow2,cache=writeback,"
+                                "format=%s,cache=writeback,"
                                 "rerror=stop,werror=stop "
                                 "-M q35 "
                                 "-device ide-hd,drive=drive0 ",
                                 debug_path,
-                                tmp_path);
+                                tmp_path, imgfmt);
 
     /* Initialize and prepare */
     port = ahci_port_select(ahci);
@@ -1263,20 +1265,20 @@ static void ahci_migrate_halted_io(uint8_t cmd_read, uint8_t cmd_write)
     prepare_blkdebug_script(debug_path, "write_aio");
 
     src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
-                               "format=qcow2,cache=writeback,"
+                               "format=%s,cache=writeback,"
                                "rerror=stop,werror=stop "
                                "-M q35 "
                                "-device ide-hd,drive=drive0 ",
                                debug_path,
-                               tmp_path);
+                               tmp_path, imgfmt);
 
     dst = ahci_boot("-drive file=%s,if=none,id=drive0,"
-                    "format=qcow2,cache=writeback,"
+                    "format=%s,cache=writeback,"
                     "rerror=stop,werror=stop "
                     "-M q35 "
                     "-device ide-hd,drive=drive0 "
                     "-incoming %s",
-                    tmp_path, uri);
+                    tmp_path, imgfmt, uri);
 
     set_context(src->parent);
 
@@ -1335,15 +1337,17 @@ static void test_flush_migrate(void)
     prepare_blkdebug_script(debug_path, "flush_to_disk");
 
     src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
-                               "cache=writeback,rerror=stop,werror=stop "
+                               "cache=writeback,rerror=stop,werror=stop,"
+                               "format=%s "
                                "-M q35 "
                                "-device ide-hd,drive=drive0 ",
-                               debug_path, tmp_path);
+                               debug_path, tmp_path, imgfmt);
     dst = ahci_boot("-drive file=%s,if=none,id=drive0,"
-                    "cache=writeback,rerror=stop,werror=stop "
+                    "cache=writeback,rerror=stop,werror=stop,"
+                    "format=%s "
                     "-M q35 "
                     "-device ide-hd,drive=drive0 "
-                    "-incoming %s", tmp_path, uri);
+                    "-incoming %s", tmp_path, imgfmt, uri);
 
     set_context(src->parent);
 
@@ -1626,9 +1630,12 @@ int main(int argc, char **argv)
         return 0;
     }
 
-    /* Create a temporary qcow2 image */
-    close(mkstemp(tmp_path));
+    /* Create a temporary image */
+    fd = mkstemp(tmp_path);
+    g_assert(fd >= 0);
+    imgfmt = "qcow2";
     mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB);
+    close(fd);
 
     /* Create temporary blkdebug instructions */
     fd = mkstemp(debug_path);
-- 
2.4.3

[Qemu-devel] [PULL 5/6] libqos: add qemu-img presence check

[John Snow]

To allow tests to optionally exercise additional tests
that require the qemu-img tool that may not be present
in all builds.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-3-git-send-email-jsnow@redhat.com
---
 tests/libqos/libqos.c | 28 +++++++++++++++++++++++-----
 tests/libqos/libqos.h |  1 +
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/tests/libqos/libqos.c b/tests/libqos/libqos.c
index 8d7c5a9..2d1a802 100644
--- a/tests/libqos/libqos.c
+++ b/tests/libqos/libqos.c
@@ -147,6 +147,23 @@ void migrate(QOSState *from, QOSState *to, const char *uri)
     set_context(to);
 }
 
+bool have_qemu_img(void)
+{
+    char *rpath;
+    const char *path = getenv("QTEST_QEMU_IMG");
+    if (!path) {
+        return false;
+    }
+
+    rpath = realpath(path, NULL);
+    if (!rpath) {
+        return false;
+    } else {
+        free(rpath);
+        return true;
+    }
+}
+
 void mkimg(const char *file, const char *fmt, unsigned size_mb)
 {
     gchar *cli;
@@ -155,13 +172,14 @@ void mkimg(const char *file, const char *fmt, unsigned size_mb)
     GError *err = NULL;
     char *qemu_img_path;
     gchar *out, *out2;
-    char *abs_path;
+    char *qemu_img_abs_path;
 
     qemu_img_path = getenv("QTEST_QEMU_IMG");
-    abs_path = realpath(qemu_img_path, NULL);
-    assert(qemu_img_path);
+    g_assert(qemu_img_path);
+    qemu_img_abs_path = realpath(qemu_img_path, NULL);
+    g_assert(qemu_img_abs_path);
 
-    cli = g_strdup_printf("%s create -f %s %s %uM", abs_path,
+    cli = g_strdup_printf("%s create -f %s %s %uM", qemu_img_abs_path,
                           fmt, file, size_mb);
     ret = g_spawn_command_line_sync(cli, &out, &out2, &rc, &err);
     if (err) {
@@ -183,7 +201,7 @@ void mkimg(const char *file, const char *fmt, unsigned size_mb)
     g_free(out);
     g_free(out2);
     g_free(cli);
-    free(abs_path);
+    free(qemu_img_abs_path);
 }
 
 void mkqcow2(const char *file, unsigned size_mb)
diff --git a/tests/libqos/libqos.h b/tests/libqos/libqos.h
index 492a651..ca14d2e 100644
--- a/tests/libqos/libqos.h
+++ b/tests/libqos/libqos.h
@@ -19,6 +19,7 @@ typedef struct QOSState {
 QOSState *qtest_vboot(QOSOps *ops, const char *cmdline_fmt, va_list ap);
 QOSState *qtest_boot(QOSOps *ops, const char *cmdline_fmt, ...);
 void qtest_shutdown(QOSState *qs);
+bool have_qemu_img(void);
 void mkimg(const char *file, const char *fmt, unsigned size_mb);
 void mkqcow2(const char *file, unsigned size_mb);
 void set_context(QOSState *s);
-- 
2.4.3

[Qemu-devel] [PULL 6/6] qtest/ahci: use raw format when qemu-img is absent

[John Snow]

If we don't have the qemu-img tool, use the raw format
for tests and skip the high-sector LBA48 tests.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-4-git-send-email-jsnow@redhat.com
---
 tests/ahci-test.c | 41 ++++++++++++++++++++++++++++++++---------
 1 file changed, 32 insertions(+), 9 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 9bf5f2c..0888506 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -39,10 +39,9 @@
 #include "hw/pci/pci_ids.h"
 #include "hw/pci/pci_regs.h"
 
-/* Test-specific defines -- in MiB */
-#define TEST_IMAGE_SIZE_MB (200 * 1024)
-#define TEST_IMAGE_SECTORS ((TEST_IMAGE_SIZE_MB / AHCI_SECTOR_SIZE)     \
-                            * 1024 * 1024)
+/* Test images sizes in MB */
+#define TEST_IMAGE_SIZE_MB_LARGE (200 * 1024)
+#define TEST_IMAGE_SIZE_MB_SMALL 64
 
 /*** Globals ***/
 static char tmp_path[] = "/tmp/qtest.XXXXXX";
@@ -50,6 +49,7 @@ static char debug_path[] = "/tmp/qtest-blkdebug.XXXXXX";
 static char mig_socket[] = "/tmp/qtest-migration.XXXXXX";
 static bool ahci_pedantic;
 static const char *imgfmt;
+static unsigned test_image_size_mb;
 
 /*** Function Declarations ***/
 static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port);
@@ -62,6 +62,11 @@ static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset);
 
 /*** Utilities ***/
 
+static uint64_t mb_to_sectors(uint64_t image_size_mb)
+{
+    return (image_size_mb * 1024 * 1024) / AHCI_SECTOR_SIZE;
+}
+
 static void string_bswap16(uint16_t *s, size_t bytes)
 {
     g_assert_cmphex((bytes & 1), ==, 0);
@@ -906,7 +911,7 @@ static void ahci_test_max(AHCIQState *ahci)
     uint64_t nsect;
     uint8_t port;
     uint8_t cmd;
-    uint64_t config_sect = TEST_IMAGE_SECTORS - 1;
+    uint64_t config_sect = mb_to_sectors(test_image_size_mb) - 1;
 
     if (config_sect > 0xFFFFFF) {
         cmd = CMD_READ_MAX_EXT;
@@ -1489,7 +1494,7 @@ static uint64_t offset_sector(enum OffsetType ofst,
         return 1;
     case OFFSET_HIGH:
         ceil = (addr_type == ADDR_MODE_LBA28) ? 0xfffffff : 0xffffffffffff;
-        ceil = MIN(ceil, TEST_IMAGE_SECTORS - 1);
+        ceil = MIN(ceil, mb_to_sectors(test_image_size_mb) - 1);
         nsectors = buffsize / AHCI_SECTOR_SIZE;
         return ceil - nsectors + 1;
     default:
@@ -1571,8 +1576,9 @@ static void create_ahci_io_test(enum IOMode type, enum AddrMode addr,
                                 enum BuffLen len, enum OffsetType offset)
 {
     char *name;
-    AHCIIOTestOptions *opts = g_malloc(sizeof(AHCIIOTestOptions));
+    AHCIIOTestOptions *opts;
 
+    opts = g_malloc(sizeof(AHCIIOTestOptions));
     opts->length = len;
     opts->address_type = addr;
     opts->io_type = type;
@@ -1584,6 +1590,13 @@ static void create_ahci_io_test(enum IOMode type, enum AddrMode addr,
                            buff_len_str[len],
                            offset_str[offset]);
 
+    if ((addr == ADDR_MODE_LBA48) && (offset == OFFSET_HIGH) &&
+        (mb_to_sectors(test_image_size_mb) <= 0xFFFFFFF)) {
+        g_test_message("%s: skipped; test image too small", name);
+        g_free(name);
+        return;
+    }
+
     qtest_add_data_func(name, opts, test_io_interface);
     g_free(name);
 }
@@ -1633,8 +1646,18 @@ int main(int argc, char **argv)
     /* Create a temporary image */
     fd = mkstemp(tmp_path);
     g_assert(fd >= 0);
-    imgfmt = "qcow2";
-    mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB);
+    if (have_qemu_img()) {
+        imgfmt = "qcow2";
+        test_image_size_mb = TEST_IMAGE_SIZE_MB_LARGE;
+        mkqcow2(tmp_path, TEST_IMAGE_SIZE_MB_LARGE);
+    } else {
+        g_test_message("QTEST_QEMU_IMG not set or qemu-img missing; "
+                       "skipping LBA48 high-sector tests");
+        imgfmt = "raw";
+        test_image_size_mb = TEST_IMAGE_SIZE_MB_SMALL;
+        ret = ftruncate(fd, test_image_size_mb * 1024 * 1024);
+        g_assert(ret == 0);
+    }
     close(fd);
 
     /* Create temporary blkdebug instructions */
-- 
2.4.3

Re: [Qemu-devel] [PULL 0/6] Ide patches

[Peter Maydell]

On 13 November 2015 at 20:16, John Snow <jsnow@redhat.com> wrote:
> The following changes since commit 8337c6cbc37c6b2184f41bab3eaff47d5e68012a:
>
>   Update version for v2.5.0-rc0 release (2015-11-13 17:10:36 +0000)
>
> are available in the git repository at:
>
>   https://github.com/jnsnow/qemu.git tags/ide-pull-request
>
> for you to fetch changes up to 917158dc3b22924922dc1f3b9d4049a4fc83d926:
>
>   qtest/ahci: use raw format when qemu-img is absent (2015-11-13 14:31:43 -0500)
>
> ----------------------------------------------------------------

I get assertion failures on OSX:

ERROR:/Users/pm215/src/qemu-for-merges/tests/hd-geo-test.c:33:char
*create_test_img(int): assertion failed: (ret == 0)

That might be "build box ran out of diskspace because test
wants to create multi-gigabyte test image" again, but it's
a bit hard to tell since the assert doesn't print the errno
for whatever failed...

thanks
-- PMM

Re: [Qemu-devel] [PULL 0/6] Ide patches

[Peter Maydell]

On 16 November 2015 at 11:07, Peter Maydell <peter.maydell@linaro.org> wrote:
> On 13 November 2015 at 20:16, John Snow <jsnow@redhat.com> wrote:
>> The following changes since commit 8337c6cbc37c6b2184f41bab3eaff47d5e68012a:
>>
>>   Update version for v2.5.0-rc0 release (2015-11-13 17:10:36 +0000)
>>
>> are available in the git repository at:
>>
>>   https://github.com/jnsnow/qemu.git tags/ide-pull-request
>>
>> for you to fetch changes up to 917158dc3b22924922dc1f3b9d4049a4fc83d926:
>>
>>   qtest/ahci: use raw format when qemu-img is absent (2015-11-13 14:31:43 -0500)
>>
>> ----------------------------------------------------------------
>
> I get assertion failures on OSX:
>
> ERROR:/Users/pm215/src/qemu-for-merges/tests/hd-geo-test.c:33:char
> *create_test_img(int): assertion failed: (ret == 0)
>
> That might be "build box ran out of diskspace because test
> wants to create multi-gigabyte test image" again, but it's
> a bit hard to tell since the assert doesn't print the errno
> for whatever failed...

Retry was ok, so I guess it was the disk space thing. Applied.

thanks
-- PMM

Re: [Qemu-devel] [PULL 0/6] Ide patches

[John Snow]

On 11/16/2015 06:32 AM, Peter Maydell wrote:
> On 16 November 2015 at 11:07, Peter Maydell <peter.maydell@linaro.org> wrote:
>> On 13 November 2015 at 20:16, John Snow <jsnow@redhat.com> wrote:
>>> The following changes since commit 8337c6cbc37c6b2184f41bab3eaff47d5e68012a:
>>>
>>>   Update version for v2.5.0-rc0 release (2015-11-13 17:10:36 +0000)
>>>
>>> are available in the git repository at:
>>>
>>>   https://github.com/jnsnow/qemu.git tags/ide-pull-request
>>>
>>> for you to fetch changes up to 917158dc3b22924922dc1f3b9d4049a4fc83d926:
>>>
>>>   qtest/ahci: use raw format when qemu-img is absent (2015-11-13 14:31:43 -0500)
>>>
>>> ----------------------------------------------------------------
>>
>> I get assertion failures on OSX:
>>
>> ERROR:/Users/pm215/src/qemu-for-merges/tests/hd-geo-test.c:33:char
>> *create_test_img(int): assertion failed: (ret == 0)
>>
>> That might be "build box ran out of diskspace because test
>> wants to create multi-gigabyte test image" again, but it's
>> a bit hard to tell since the assert doesn't print the errno
>> for whatever failed...
> 
> Retry was ok, so I guess it was the disk space thing. Applied.
> 
> thanks
> -- PMM
> 

I'll get back to fixing that one.

Thanks,
--js