[Qemu-devel] [RFC][PATCH v2 0/2] utils: Improve and document error reporting

[Qemu-devel] [RFC][PATCH v2 0/2] utils: Improve and document error reporting

[Lluís Vilanova]

Adds support for reporting non-terminating errors (dubbed warnings), and briefly
documents what routines should developers generally use to keep error reporting
consistent.

Changes in v2
=============

* Split in two patches.
* Explicitly add a warning error object.


Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---

Lluís Vilanova (2):
      utils: Add warning messages
      doc: Introduce coding style for errors


 HACKING              |   31 +++++++++++++++++++++++++++++++
 include/qapi/error.h |   20 ++++++++++++++++++++
 util/error.c         |   37 +++++++++++++++++++++++++++----------
 3 files changed, 78 insertions(+), 10 deletions(-)


To: qemu-devel@nongnu.org
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>

[Qemu-devel] [PATCH v2 1/2] utils: Add warning messages

[Lluís Vilanova]

Adds a special error object that transforms error messages into
immediately reported warnings.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
 include/qapi/error.h |   20 ++++++++++++++++++++
 util/error.c         |   37 +++++++++++++++++++++++++++----------
 2 files changed, 47 insertions(+), 10 deletions(-)

diff --git a/include/qapi/error.h b/include/qapi/error.h
index 4d42cdc..9b7600c 100644
--- a/include/qapi/error.h
+++ b/include/qapi/error.h
@@ -57,6 +57,9 @@
  * Call a function treating errors as fatal:
  *     foo(arg, &error_fatal);
  *
+ * Call a function immediately showing all errors as warnings:
+ *     foo(arg, &error_warn);
+ *
  * Receive an error and pass it on to the caller:
  *     Error *err = NULL;
  *     foo(arg, &err);
@@ -108,6 +111,7 @@ ErrorClass error_get_class(const Error *err);
  * then.
  * If @errp is &error_abort, print a suitable message and abort().
  * If @errp is &error_fatal, print a suitable message and exit(1).
+ * If @errp is &error_warn, print a suitable message.
  * If @errp is anything else, *@errp must be NULL.
  * The new error's class is ERROR_CLASS_GENERIC_ERROR, and its
  * human-readable error message is made from printf-style @fmt, ...
@@ -158,6 +162,7 @@ void error_setg_win32_internal(Error **errp,
  * abort().
  * Else, if @dst_errp is &error_fatal, print a suitable message and
  * exit(1).
+ * Else, if @dst_errp is &error_warn, print a suitable message.
  * Else, if @dst_errp already contains an error, ignore this one: free
  * the error object.
  * Else, move the error object from @local_err to *@dst_errp.
@@ -218,12 +223,27 @@ void error_set_internal(Error **errp,
 
 /*
  * Pass to error_setg() & friends to abort() on error.
+ *
+ * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
+ *          (e.g., some unimplimented corner case in guest code translation or
+ *          device code). Otherwise that can be abused by guest code to
+ *          terminate QEMU.
  */
 extern Error *error_abort;
 
 /*
  * Pass to error_setg() & friends to exit(1) on error.
+ *
+ * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
+ *          (e.g., some unimplimented corner case in guest code translation or
+ *          device code). Otherwise that can be abused by guest code to
+ *          terminate QEMU.
  */
 extern Error *error_fatal;
 
+/*
+ * Pass to error_setg() & friends to immediately show an error as a warning.
+ */
+extern Error *error_warn;
+
 #endif
diff --git a/util/error.c b/util/error.c
index 80c89a2..85170e54 100644
--- a/util/error.c
+++ b/util/error.c
@@ -15,6 +15,7 @@
 #include "qemu-common.h"
 #include "qapi/error.h"
 #include "qemu/error-report.h"
+#include "qemu/timer.h"
 
 struct Error
 {
@@ -27,8 +28,9 @@ struct Error
 
 Error *error_abort;
 Error *error_fatal;
+Error *error_warn;
 
-static void error_handle_fatal(Error **errp, Error *err)
+static bool error_handle_fatal(Error **errp, Error *err)
 {
     if (errp == &error_abort) {
         fprintf(stderr, "Unexpected error in %s() at %s:%d:\n",
@@ -40,6 +42,20 @@ static void error_handle_fatal(Error **errp, Error *err)
         error_report_err(err);
         exit(1);
     }
+
+    if (errp == &error_warn) {
+        /* cannot use error_report_err() because it adds newlines */
+        error_report("warning: [%s() at %s:%d] %s",
+                     err->func, err->src, err->line, err->msg);
+        if (err->hint) {
+            error_printf_unless_qmp("warning: [%s() at %s:%d] %s",
+                                    err->func, err->src, err->line,
+                                    err->hint->str);
+        }
+        return true;
+    } else {
+        return false;
+    }
 }
 
 static void error_setv(Error **errp,
@@ -61,10 +77,10 @@ static void error_setv(Error **errp,
     err->line = line;
     err->func = func;
 
-    error_handle_fatal(errp, err);
-    *errp = err;
-
-    errno = saved_errno;
+    if (!error_handle_fatal(errp, err)) {
+        *errp = err;
+        errno = saved_errno;
+    }
 }
 
 void error_set_internal(Error **errp,
@@ -232,10 +248,11 @@ void error_propagate(Error **dst_errp, Error *local_err)
     if (!local_err) {
         return;
     }
-    error_handle_fatal(dst_errp, local_err);
-    if (dst_errp && !*dst_errp) {
-        *dst_errp = local_err;
-    } else {
-        error_free(local_err);
+    if (!error_handle_fatal(dst_errp, local_err)) {
+        if (dst_errp && !*dst_errp) {
+            *dst_errp = local_err;
+        } else {
+            error_free(local_err);
+        }
     }
 }

Re: [Qemu-devel] [PATCH v2 1/2] utils: Add warning messages

[Markus Armbruster]

Lluís Vilanova <vilanova@ac.upc.edu> writes:

> Adds a special error object that transforms error messages into
> immediately reported warnings.

Before I dive into details: my fundamental objection is that &error_warn
is new infrastructure without a use.  The new "this is how you should do
warnings" paragraph in error.h's big comment does not count as use :)

Without actual use, we can't be sure it's useful.  And being useful
should be mandatory for new infrastructure, even when it's as small as
this one.

Finally, note that

    err = NULL;
    foo(arg, &err);
    if (err) {
        error_report("warning: %s", error_get_pretty(err));
        error_free(err);
    }

and

    foo(arg, &error_warn)

are subtly different.

One, the former throws away the hint.  That may or may not be
appropriate.  It also happens in other places that amend an error's
message.  Perhaps we could use a function to amend an error's message.
To find out, we'd have to track down the places that do that now.

Two, the latter doesn't let the caller see whether foo() warned.  I
believe this makes it unsuitable for some cases, or in other words, it's
insufficiently general.

Three, the latter can't catch misuse the former catches, namely multiple
error_set().  The latter happily reports all of them, the former fails
error_setv()'s assertion for the second one.

If warnings are common enough to justify infrastructure, then I figure a
convenience function to report an Error as a warning similar to
error_report_err() would be more general and less prone to misuse.

> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
> ---
>  include/qapi/error.h |   20 ++++++++++++++++++++
>  util/error.c         |   37 +++++++++++++++++++++++++++----------
>  2 files changed, 47 insertions(+), 10 deletions(-)
>
> diff --git a/include/qapi/error.h b/include/qapi/error.h
> index 4d42cdc..9b7600c 100644
> --- a/include/qapi/error.h
> +++ b/include/qapi/error.h
> @@ -57,6 +57,9 @@
>   * Call a function treating errors as fatal:
>   *     foo(arg, &error_fatal);
>   *
> + * Call a function immediately showing all errors as warnings:
> + *     foo(arg, &error_warn);
> + *
>   * Receive an error and pass it on to the caller:
>   *     Error *err = NULL;
>   *     foo(arg, &err);
> @@ -108,6 +111,7 @@ ErrorClass error_get_class(const Error *err);
>   * then.
>   * If @errp is &error_abort, print a suitable message and abort().
>   * If @errp is &error_fatal, print a suitable message and exit(1).
> + * If @errp is &error_warn, print a suitable message.
>   * If @errp is anything else, *@errp must be NULL.
>   * The new error's class is ERROR_CLASS_GENERIC_ERROR, and its
>   * human-readable error message is made from printf-style @fmt, ...
> @@ -158,6 +162,7 @@ void error_setg_win32_internal(Error **errp,
>   * abort().
>   * Else, if @dst_errp is &error_fatal, print a suitable message and
>   * exit(1).
> + * Else, if @dst_errp is &error_warn, print a suitable message.
>   * Else, if @dst_errp already contains an error, ignore this one: free
>   * the error object.
>   * Else, move the error object from @local_err to *@dst_errp.
> @@ -218,12 +223,27 @@ void error_set_internal(Error **errp,
>  
>  /*
>   * Pass to error_setg() & friends to abort() on error.
> + *
> + * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
> + *          (e.g., some unimplimented corner case in guest code translation or
> + *          device code). Otherwise that can be abused by guest code to
> + *          terminate QEMU.
>   */
>  extern Error *error_abort;
>  
>  /*
>   * Pass to error_setg() & friends to exit(1) on error.
> + *
> + * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
> + *          (e.g., some unimplimented corner case in guest code translation or
> + *          device code). Otherwise that can be abused by guest code to
> + *          terminate QEMU.
>   */
>  extern Error *error_fatal;

This hunk isn't covered by the commit message.

Similar admonitions elsewhere in this file are less ornately decorated.
Plain

 * Do *not* use for errors that are (or can be) triggered by guest code
 * (e.g., some unimplemented corner case in guest code translation or
 * device code). Otherwise that can be abused by guest code to terminate
 * QEMU.

would do, and avoid the long lines.

Except this wording is too narrow.  There are many more places where
"terminate on error" is wrong, such as monitor commands.

&error_exit is okay exactly when and where exit(1) is okay: on
configuration error during startup, and on certain unrecoverable errors
where it's unsafe to continue.

Likewise, &error_abort is okay exactly when and where abort() is okay:
mostly on programming errors.  Possibly also on "unexpected"
unrecoverable errors where it's unsafe to continue; we did that for most
memory allocation failures at some time, not sure we still do.

Perhaps we need to advise on proper use of abort() and exit(1), but I
doubt error.h is the right place to do it.

Perhaps we need to remind users some more that &error_exit is just like
exit(1) and &error_abort is just like abort().  Doubtful.

If we want to, I'd recommend a separate patch.

>  
> +/*
> + * Pass to error_setg() & friends to immediately show an error as a warning.
> + */
> +extern Error *error_warn;
> +
>  #endif
> diff --git a/util/error.c b/util/error.c
> index 80c89a2..85170e54 100644
> --- a/util/error.c
> +++ b/util/error.c
> @@ -15,6 +15,7 @@
>  #include "qemu-common.h"
>  #include "qapi/error.h"
>  #include "qemu/error-report.h"
> +#include "qemu/timer.h"
>  
>  struct Error
>  {
> @@ -27,8 +28,9 @@ struct Error
>  
>  Error *error_abort;
>  Error *error_fatal;
> +Error *error_warn;
>  
> -static void error_handle_fatal(Error **errp, Error *err)
> +static bool error_handle_fatal(Error **errp, Error *err)
>  {
>      if (errp == &error_abort) {
>          fprintf(stderr, "Unexpected error in %s() at %s:%d:\n",
> @@ -40,6 +42,20 @@ static void error_handle_fatal(Error **errp, Error *err)
>          error_report_err(err);
>          exit(1);
>      }
> +
> +    if (errp == &error_warn) {
> +        /* cannot use error_report_err() because it adds newlines */
> +        error_report("warning: [%s() at %s:%d] %s",
> +                     err->func, err->src, err->line, err->msg);

I don't think we should show err->func & friends.

We do for &error_abort, because that's a message for developers.

We don't for &error_exit, because that's for users.

> +        if (err->hint) {
> +            error_printf_unless_qmp("warning: [%s() at %s:%d] %s",
> +                                    err->func, err->src, err->line,
> +                                    err->hint->str);
> +        }
> +        return true;
> +    } else {
> +        return false;
> +    }
>  }

The function's name is now misleading.

>  
>  static void error_setv(Error **errp,
> @@ -61,10 +77,10 @@ static void error_setv(Error **errp,
>      err->line = line;
>      err->func = func;
>  
> -    error_handle_fatal(errp, err);
> -    *errp = err;
> -
> -    errno = saved_errno;
> +    if (!error_handle_fatal(errp, err)) {
> +        *errp = err;
> +        errno = saved_errno;
> +    }
>  }

Awkward.

>  
>  void error_set_internal(Error **errp,
> @@ -232,10 +248,11 @@ void error_propagate(Error **dst_errp, Error *local_err)
>      if (!local_err) {
>          return;
>      }
> -    error_handle_fatal(dst_errp, local_err);
> -    if (dst_errp && !*dst_errp) {
> -        *dst_errp = local_err;
> -    } else {
> -        error_free(local_err);
> +    if (!error_handle_fatal(dst_errp, local_err)) {
> +        if (dst_errp && !*dst_errp) {
> +            *dst_errp = local_err;
> +        } else {
> +            error_free(local_err);
> +        }
>      }
>  }

Just as awkward.

Re: [Qemu-devel] [PATCH v2 1/2] utils: Add warning messages

[Lluís Vilanova]

Markus Armbruster writes:

> Lluís Vilanova <vilanova@ac.upc.edu> writes:
>> Adds a special error object that transforms error messages into
>> immediately reported warnings.

> Before I dive into details: my fundamental objection is that &error_warn
> is new infrastructure without a use.  The new "this is how you should do
> warnings" paragraph in error.h's big comment does not count as use :)

> Without actual use, we can't be sure it's useful.  And being useful
> should be mandatory for new infrastructure, even when it's as small as
> this one.

> Finally, note that

>     err = NULL;
>     foo(arg, &err);
>     if (err) {
>         error_report("warning: %s", error_get_pretty(err));
>         error_free(err);
>     }

> and

>     foo(arg, &error_warn)

> are subtly different.

> One, the former throws away the hint.  That may or may not be
> appropriate.  It also happens in other places that amend an error's
> message.  Perhaps we could use a function to amend an error's message.
> To find out, we'd have to track down the places that do that now.

> Two, the latter doesn't let the caller see whether foo() warned.  I
> believe this makes it unsuitable for some cases, or in other words, it's
> insufficiently general.

> Three, the latter can't catch misuse the former catches, namely multiple
> error_set().  The latter happily reports all of them, the former fails
> error_setv()'s assertion for the second one.

> If warnings are common enough to justify infrastructure, then I figure a
> convenience function to report an Error as a warning similar to
> error_report_err() would be more general and less prone to misuse.

Certainly true. The target was to avoid raw uses of the more verbose error_*
routines in the most common cases, concentrating most uses onto error_setg. If I
eliminate the new 'error_warn' then there is no clear and consistent formatting
substitute for printf.

Since I do not have time to port existing printf's into 'error_warn', I can just
drop this patch. Instead, we can simply admonish developers to use
'error_report' instead of plain 'printf' (although formatting will vary).

Also, using anything that is non-trivially more complex than a printf will
probably shy away developers from using it.


>> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
>> ---
>> include/qapi/error.h |   20 ++++++++++++++++++++
>> util/error.c         |   37 +++++++++++++++++++++++++++----------
>> 2 files changed, 47 insertions(+), 10 deletions(-)
>> 
>> diff --git a/include/qapi/error.h b/include/qapi/error.h
>> index 4d42cdc..9b7600c 100644
>> --- a/include/qapi/error.h
>> +++ b/include/qapi/error.h
>> @@ -57,6 +57,9 @@
>> * Call a function treating errors as fatal:
>> *     foo(arg, &error_fatal);
>> *
>> + * Call a function immediately showing all errors as warnings:
>> + *     foo(arg, &error_warn);
>> + *
>> * Receive an error and pass it on to the caller:
>> *     Error *err = NULL;
>> *     foo(arg, &err);
>> @@ -108,6 +111,7 @@ ErrorClass error_get_class(const Error *err);
>> * then.
>> * If @errp is &error_abort, print a suitable message and abort().
>> * If @errp is &error_fatal, print a suitable message and exit(1).
>> + * If @errp is &error_warn, print a suitable message.
>> * If @errp is anything else, *@errp must be NULL.
>> * The new error's class is ERROR_CLASS_GENERIC_ERROR, and its
>> * human-readable error message is made from printf-style @fmt, ...
>> @@ -158,6 +162,7 @@ void error_setg_win32_internal(Error **errp,
>> * abort().
>> * Else, if @dst_errp is &error_fatal, print a suitable message and
>> * exit(1).
>> + * Else, if @dst_errp is &error_warn, print a suitable message.
>> * Else, if @dst_errp already contains an error, ignore this one: free
>> * the error object.
>> * Else, move the error object from @local_err to *@dst_errp.
>> @@ -218,12 +223,27 @@ void error_set_internal(Error **errp,
>> 
>> /*
>> * Pass to error_setg() & friends to abort() on error.
>> + *
>> + * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
>> + *          (e.g., some unimplimented corner case in guest code translation or
>> + *          device code). Otherwise that can be abused by guest code to
>> + *          terminate QEMU.
>> */
>> extern Error *error_abort;
>> 
>> /*
>> * Pass to error_setg() & friends to exit(1) on error.
>> + *
>> + * WARNING: Do _not_ use for errors that are (or can be) triggered by guest code
>> + *          (e.g., some unimplimented corner case in guest code translation or
>> + *          device code). Otherwise that can be abused by guest code to
>> + *          terminate QEMU.
>> */
>> extern Error *error_fatal;

> This hunk isn't covered by the commit message.

> Similar admonitions elsewhere in this file are less ornately decorated.
> Plain

>  * Do *not* use for errors that are (or can be) triggered by guest code
>  * (e.g., some unimplemented corner case in guest code translation or
>  * device code). Otherwise that can be abused by guest code to terminate
>  * QEMU.

> would do, and avoid the long lines.

> Except this wording is too narrow.  There are many more places where
> "terminate on error" is wrong, such as monitor commands.

> &error_exit is okay exactly when and where exit(1) is okay: on
> configuration error during startup, and on certain unrecoverable errors
> where it's unsafe to continue.

> Likewise, &error_abort is okay exactly when and where abort() is okay:
> mostly on programming errors.  Possibly also on "unexpected"
> unrecoverable errors where it's unsafe to continue; we did that for most
> memory allocation failures at some time, not sure we still do.

> Perhaps we need to advise on proper use of abort() and exit(1), but I
> doubt error.h is the right place to do it.

> Perhaps we need to remind users some more that &error_exit is just like
> exit(1) and &error_abort is just like abort().  Doubtful.

> If we want to, I'd recommend a separate patch.
[...]

Hmm, then I'll remove those advices and merge your comments into HACKING (which
tries to provide very high-level guidelines of when it's safe to exit/abort). In
fact the advices on the comments are mere reminders of the text there.

Thanks,
  Lluis

[Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Lluís Vilanova]

Gives some general guidelines for reporting errors in QEMU.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
 HACKING |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/HACKING b/HACKING
index 12fbc8a..e59bc34 100644
--- a/HACKING
+++ b/HACKING
@@ -157,3 +157,34 @@ painful. These are:
  * you may assume that integers are 2s complement representation
  * you may assume that right shift of a signed integer duplicates
    the sign bit (ie it is an arithmetic shift, not a logical shift)
+
+7. Error reporting
+
+QEMU provides two different mechanisms for reporting errors. You should use one
+of these mechanisms instead of manually reporting them (i.e., do not use
+'printf', 'exit' or 'abort').
+
+7.1. Errors in user inputs
+
+QEMU provides the functions in "include/qemu/error-report.h" to report errors
+related to inputs provided by the user (e.g., command line arguments or
+configuration files).
+
+These functions generate error messages with a uniform format that can reference
+a location on the offending input.
+
+7.2. Other errors
+
+QEMU provides the functions in "include/qapi/error.h" to report other types of
+errors (i.e., not triggered by command line arguments or configuration files).
+
+Functions in this header are used to accumulate error messages in an 'Error'
+object, which can be propagated up the call chain where it is finally reported.
+
+In its simplest form, you can immediately report an error with:
+
+    error_setg(&error_warn, "Error with %s", "arguments");
+
+See the "include/qapi/error.h" header for additional convenience functions and
+special arguments. Specially, see 'error_fatal' and 'error_abort' to show errors
+and immediately terminate QEMU.

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Daniel P. Berrange]

On Mon, Nov 23, 2015 at 07:41:24PM +0100, Lluís Vilanova wrote:
> Gives some general guidelines for reporting errors in QEMU.
> 
> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
> ---
>  HACKING |   31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/HACKING b/HACKING
> index 12fbc8a..e59bc34 100644
> --- a/HACKING
> +++ b/HACKING
> @@ -157,3 +157,34 @@ painful. These are:
>   * you may assume that integers are 2s complement representation
>   * you may assume that right shift of a signed integer duplicates
>     the sign bit (ie it is an arithmetic shift, not a logical shift)
> +
> +7. Error reporting
> +
> +QEMU provides two different mechanisms for reporting errors. You should use one
> +of these mechanisms instead of manually reporting them (i.e., do not use
> +'printf', 'exit' or 'abort').
> +
> +7.1. Errors in user inputs
> +
> +QEMU provides the functions in "include/qemu/error-report.h" to report errors
> +related to inputs provided by the user (e.g., command line arguments or
> +configuration files).
> +
> +These functions generate error messages with a uniform format that can reference
> +a location on the offending input.
> +
> +7.2. Other errors
> +
> +QEMU provides the functions in "include/qapi/error.h" to report other types of
> +errors (i.e., not triggered by command line arguments or configuration files).
> +
> +Functions in this header are used to accumulate error messages in an 'Error'
> +object, which can be propagated up the call chain where it is finally reported.
> +
> +In its simplest form, you can immediately report an error with:
> +
> +    error_setg(&error_warn, "Error with %s", "arguments");
> +
> +See the "include/qapi/error.h" header for additional convenience functions and
> +special arguments. Specially, see 'error_fatal' and 'error_abort' to show errors
> +and immediately terminate QEMU.

I don't think this "Errors in user inputs" vs "Other errors" distinction
really makes sense. Whether an error raised in a piece of code is related
to user input or not is almost impossible to determine in practice. So as
a rule to follow it is not practical.

AFAIK, include/qemu/error-report.h is the historical failed experiment
in structured error reporting, while  include/qapi/error.h is the new
preferred error reporting system that everything should be using.

On this basis, I'd simply say that include/qemu/error-report.h is
legacy code that should no longer be used, and that new code should
use include/qapi/error.h exclusively and existing code converted
where practical.

Regards,
Daniel
-- 
|: http://berrange.com      -o-    http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org              -o-             http://virt-manager.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org       -o-       http://live.gnome.org/gtk-vnc :|

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Lluís Vilanova]

Daniel P Berrange writes:
[...]
> I don't think this "Errors in user inputs" vs "Other errors" distinction
> really makes sense. Whether an error raised in a piece of code is related
> to user input or not is almost impossible to determine in practice. So as
> a rule to follow it is not practical.

> AFAIK, include/qemu/error-report.h is the historical failed experiment
> in structured error reporting, while  include/qapi/error.h is the new
> preferred error reporting system that everything should be using.

> On this basis, I'd simply say that include/qemu/error-report.h is
> legacy code that should no longer be used, and that new code should
> use include/qapi/error.h exclusively and existing code converted
> where practical.

Mmmm, I've just reviewed both headers and you sound partially right.

AFAIU, "qemu/error-report.h" contains the additional logic to manage "input
locations", not present anywhere else. Also, you state that only the reporting
functions in "qemu/error.h" should be used.

Since "qemu/error.h" internally uses 'error_report()' (from
"qemu/error-report.h"), it includes the input location information (if any). So,
I will simply refer to "qemu/error.h" for the general reporting functions, plus
the location management functions in "qemu/error-report.h".

Does this sound to follow the expected flow of latest QEMU?

Thanks,
  Lluis

-- 
"And it's much the same thing with knowledge, for whenever you learn
something new, the whole world becomes that much richer."
-- The Princess of Pure Reason, as told by Norton Juster in The Phantom
Tollbooth

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Daniel P. Berrange]

On Mon, Nov 23, 2015 at 09:05:30PM +0100, Lluís Vilanova wrote:
> Daniel P Berrange writes:
> [...]
> > I don't think this "Errors in user inputs" vs "Other errors" distinction
> > really makes sense. Whether an error raised in a piece of code is related
> > to user input or not is almost impossible to determine in practice. So as
> > a rule to follow it is not practical.
> 
> > AFAIK, include/qemu/error-report.h is the historical failed experiment
> > in structured error reporting, while  include/qapi/error.h is the new
> > preferred error reporting system that everything should be using.
> 
> > On this basis, I'd simply say that include/qemu/error-report.h is
> > legacy code that should no longer be used, and that new code should
> > use include/qapi/error.h exclusively and existing code converted
> > where practical.
> 
> Mmmm, I've just reviewed both headers and you sound partially right.
> 
> AFAIU, "qemu/error-report.h" contains the additional logic to manage "input
> locations", not present anywhere else. Also, you state that only the reporting
> functions in "qemu/error.h" should be used.
> 
> Since "qemu/error.h" internally uses 'error_report()' (from
> "qemu/error-report.h"), it includes the input location information (if any). So,
> I will simply refer to "qemu/error.h" for the general reporting functions, plus
> the location management functions in "qemu/error-report.h".

I don't think the location management functions need to be pointed
out as broadly speaking, no patches ever need to use them. It should
be sufficient to just describe the new error reporting functions
in no new code will ever want to use them in general. Really we
only need document the qapi/error.h functions and tell people not
to use anything else


Regards,
Daniel
-- 
|: http://berrange.com      -o-    http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org              -o-             http://virt-manager.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org       -o-       http://live.gnome.org/gtk-vnc :|

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Markus Armbruster]

"Daniel P. Berrange" <berrange@redhat.com> writes:

> On Mon, Nov 23, 2015 at 09:05:30PM +0100, Lluís Vilanova wrote:
>> Daniel P Berrange writes:
>> [...]
>> > I don't think this "Errors in user inputs" vs "Other errors" distinction
>> > really makes sense. Whether an error raised in a piece of code is related
>> > to user input or not is almost impossible to determine in practice. So as
>> > a rule to follow it is not practical.
>> 
>> > AFAIK, include/qemu/error-report.h is the historical failed experiment
>> > in structured error reporting, while  include/qapi/error.h is the new
>> > preferred error reporting system that everything should be using.
>> 
>> > On this basis, I'd simply say that include/qemu/error-report.h is
>> > legacy code that should no longer be used, and that new code should
>> > use include/qapi/error.h exclusively and existing code converted
>> > where practical.
>> 
>> Mmmm, I've just reviewed both headers and you sound partially right.
>> 
>> AFAIU, "qemu/error-report.h" contains the additional logic to manage "input
>> locations", not present anywhere else. Also, you state that only the reporting
>> functions in "qemu/error.h" should be used.
>> 
>> Since "qemu/error.h" internally uses 'error_report()' (from
>> "qemu/error-report.h"), it includes the input location information
>> (if any). So,
>> I will simply refer to "qemu/error.h" for the general reporting
>> functions, plus
>> the location management functions in "qemu/error-report.h".
>
> I don't think the location management functions need to be pointed
> out as broadly speaking, no patches ever need to use them. It should
> be sufficient to just describe the new error reporting functions
> in no new code will ever want to use them in general. Really we
> only need document the qapi/error.h functions and tell people not
> to use anything else

People *will* need to use error-report.h to report errors to stderr or
HMP monitor in code wherever such reporting is appropriate.

Good examples include handling command line options, HMP command
handlers.

A not so good example would be device emulation code; there we should
arguably use a logging interface instead, which we don't have.

Counter-examples are a QMP command handler, and pretty much any other
code that's expected to pass on its errors for somebody else to handle.

Locations are mostly automatic, but there are cases where you can
improve error message quality by setting the right location.  Underused.
A few examples are visible in grep loc_pop().

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Markus Armbruster]

"Daniel P. Berrange" <berrange@redhat.com> writes:

> On Mon, Nov 23, 2015 at 07:41:24PM +0100, Lluís Vilanova wrote:
>> Gives some general guidelines for reporting errors in QEMU.
>> 
>> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
>> ---
>>  HACKING |   31 +++++++++++++++++++++++++++++++
>>  1 file changed, 31 insertions(+)
>> 
>> diff --git a/HACKING b/HACKING
>> index 12fbc8a..e59bc34 100644
>> --- a/HACKING
>> +++ b/HACKING
>> @@ -157,3 +157,34 @@ painful. These are:
>>   * you may assume that integers are 2s complement representation
>>   * you may assume that right shift of a signed integer duplicates
>>     the sign bit (ie it is an arithmetic shift, not a logical shift)
>> +
>> +7. Error reporting
>> +
>> +QEMU provides two different mechanisms for reporting errors. You should use one
>> +of these mechanisms instead of manually reporting them (i.e., do not use
>> +'printf', 'exit' or 'abort').
>> +
>> +7.1. Errors in user inputs
>> +
>> +QEMU provides the functions in "include/qemu/error-report.h" to report errors
>> +related to inputs provided by the user (e.g., command line arguments or
>> +configuration files).
>> +
>> +These functions generate error messages with a uniform format that can reference
>> +a location on the offending input.
>> +
>> +7.2. Other errors
>> +
>> +QEMU provides the functions in "include/qapi/error.h" to report other types of
>> +errors (i.e., not triggered by command line arguments or configuration files).
>> +
>> +Functions in this header are used to accumulate error messages in an 'Error'
>> +object, which can be propagated up the call chain where it is finally reported.
>> +
>> +In its simplest form, you can immediately report an error with:
>> +
>> +    error_setg(&error_warn, "Error with %s", "arguments");
>> +
>> +See the "include/qapi/error.h" header for additional convenience functions and
>> +special arguments. Specially, see 'error_fatal' and 'error_abort' to show errors
>> +and immediately terminate QEMU.
>
> I don't think this "Errors in user inputs" vs "Other errors" distinction
> really makes sense. Whether an error raised in a piece of code is related
> to user input or not is almost impossible to determine in practice. So as
> a rule to follow it is not practical.
>
> AFAIK, include/qemu/error-report.h is the historical failed experiment
> in structured error reporting, while  include/qapi/error.h is the new
> preferred error reporting system that everything should be using.

Not quite :)

error-report.h predates the failed experiment.  The experiment was
actually error.h, but we've since reworked it as far as practical.  One
leftover is still clearly visible: error classes.  Their use is strongly
discouraged.

error.h is for passing around errors within QEMU.  error-report.h is for
reporting them to human users via stderr or HMP.  Reporting them via QMP
is encapsulated within the QMP monitor code.

error.h has a few convenience interfaces to report to human users.
They're implemented on top of error-report.h.

> On this basis, I'd simply say that include/qemu/error-report.h is
> legacy code that should no longer be used, and that new code should
> use include/qapi/error.h exclusively and existing code converted
> where practical.

Absolutely not :)

1. Use the simplest suitable method to communicate success / failure
within code.  Stick to common methods: non-negative / -1, non-negative /
-errno, non-null / null, Error ** parameter.

Example: when a function returns a non null-pointer on success, and it
can fail only one way (as far as the caller is concerned), returning
null on failure is just fine, and certainly simpler and a lot easier on
the eyes than Error **.

Example: when a function's callers need to report details on failure
only the function really knows, use Error **, and set suitable errors.

2. Use error-report.h to report errors to stderr or an HMP monitor.

Do not report an error when you're also passing an error for somebody
else to handle!  Leave the reporting to the place that consumes the
error you pass.

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Lluís Vilanova]

Markus Armbruster writes:

> "Daniel P. Berrange" <berrange@redhat.com> writes:
>> On Mon, Nov 23, 2015 at 07:41:24PM +0100, Lluís Vilanova wrote:
>>> Gives some general guidelines for reporting errors in QEMU.
>>> 
>>> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
>>> ---
>>> HACKING |   31 +++++++++++++++++++++++++++++++
>>> 1 file changed, 31 insertions(+)
>>> 
>>> diff --git a/HACKING b/HACKING
>>> index 12fbc8a..e59bc34 100644
>>> --- a/HACKING
>>> +++ b/HACKING
>>> @@ -157,3 +157,34 @@ painful. These are:
>>> * you may assume that integers are 2s complement representation
>>> * you may assume that right shift of a signed integer duplicates
>>> the sign bit (ie it is an arithmetic shift, not a logical shift)
>>> +
>>> +7. Error reporting
>>> +
>>> +QEMU provides two different mechanisms for reporting errors. You should use one
>>> +of these mechanisms instead of manually reporting them (i.e., do not use
>>> +'printf', 'exit' or 'abort').
>>> +
>>> +7.1. Errors in user inputs
>>> +
>>> +QEMU provides the functions in "include/qemu/error-report.h" to report errors
>>> +related to inputs provided by the user (e.g., command line arguments or
>>> +configuration files).
>>> +
>>> +These functions generate error messages with a uniform format that can reference
>>> +a location on the offending input.
>>> +
>>> +7.2. Other errors
>>> +
>>> +QEMU provides the functions in "include/qapi/error.h" to report other types of
>>> +errors (i.e., not triggered by command line arguments or configuration files).
>>> +
>>> +Functions in this header are used to accumulate error messages in an 'Error'
>>> +object, which can be propagated up the call chain where it is finally reported.
>>> +
>>> +In its simplest form, you can immediately report an error with:
>>> +
>>> +    error_setg(&error_warn, "Error with %s", "arguments");
>>> +
>>> +See the "include/qapi/error.h" header for additional convenience functions and
>>> +special arguments. Specially, see 'error_fatal' and 'error_abort' to show errors
>>> +and immediately terminate QEMU.
>> 
>> I don't think this "Errors in user inputs" vs "Other errors" distinction
>> really makes sense. Whether an error raised in a piece of code is related
>> to user input or not is almost impossible to determine in practice. So as
>> a rule to follow it is not practical.
>> 
>> AFAIK, include/qemu/error-report.h is the historical failed experiment
>> in structured error reporting, while  include/qapi/error.h is the new
>> preferred error reporting system that everything should be using.

> Not quite :)

> error-report.h predates the failed experiment.  The experiment was
> actually error.h, but we've since reworked it as far as practical.  One
> leftover is still clearly visible: error classes.  Their use is strongly
> discouraged.

> error.h is for passing around errors within QEMU.  error-report.h is for
> reporting them to human users via stderr or HMP.  Reporting them via QMP
> is encapsulated within the QMP monitor code.

> error.h has a few convenience interfaces to report to human users.
> They're implemented on top of error-report.h.

>> On this basis, I'd simply say that include/qemu/error-report.h is
>> legacy code that should no longer be used, and that new code should
>> use include/qapi/error.h exclusively and existing code converted
>> where practical.

> Absolutely not :)

> 1. Use the simplest suitable method to communicate success / failure
> within code.  Stick to common methods: non-negative / -1, non-negative /
> -errno, non-null / null, Error ** parameter.

> Example: when a function returns a non null-pointer on success, and it
> can fail only one way (as far as the caller is concerned), returning
> null on failure is just fine, and certainly simpler and a lot easier on
> the eyes than Error **.

> Example: when a function's callers need to report details on failure
> only the function really knows, use Error **, and set suitable errors.

> 2. Use error-report.h to report errors to stderr or an HMP monitor.

> Do not report an error when you're also passing an error for somebody
> else to handle!  Leave the reporting to the place that consumes the
> error you pass.

I'm sorry, but I don't see a clear consensus on what should be used.  I ended up
adding a new special error object named 'error_warn'.  My hope is that this will
allow most uses of raw "error-report.h" functions (e.g., 'error_printf') and raw
'printf' to converge onto "error.h".

So what about this shorter version for the docs:

--------------------------------------------------
7. Error reporting

QEMU provides a variety of interfaces for reporting errors in a uniform
format. You should use one of these interfaces instead of manually reporting
them (i.e., do not use 'printf', 'exit' or 'abort').

The simplest form is reporting non-terminating errors (from "qapi/error.h"):

    error_setg(&error_warn, "error for value %d", 1);

There also are two convenience arguments for errors that must terminate QEMU:

    // calls exit()
    error_setg(&error_fatal, "error for value %d", 1);

    // calls abort() and shows source code information
    error_setg(&error_abort, "error for value %d", 1);

You should _not_ use terminating functions for errors that are (or can be)
triggered by guest code (e.g., some unimplemented corner case in guest code
translation or device code). Otherwise that can be abused by guest code to force
QEMU to terminate.

The "qapi/error.h" header contains more details for other more complex usage
patterns (e.g., propagating error messages across functions).

You can also use the location management functions in header
"qemu/error-report.h" to provide additional information related to inputs
provided by the user (e.g., command line arguments or configuration files).
--------------------------------------------------

Thanks,
  Lluis

-- 
"And it's much the same thing with knowledge, for whenever you learn
something new, the whole world becomes that much richer."
-- The Princess of Pure Reason, as told by Norton Juster in The Phantom
Tollbooth

Re: [Qemu-devel] [PATCH v2 2/2] doc: Introduce coding style for errors

[Markus Armbruster]

Lluís Vilanova <vilanova@ac.upc.edu> writes:

> Markus Armbruster writes:
>
>> "Daniel P. Berrange" <berrange@redhat.com> writes:
>>> On Mon, Nov 23, 2015 at 07:41:24PM +0100, Lluís Vilanova wrote:
>>>> Gives some general guidelines for reporting errors in QEMU.
>>>> 
>>>> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
>>>> ---
>>>> HACKING |   31 +++++++++++++++++++++++++++++++
>>>> 1 file changed, 31 insertions(+)
>>>> 
>>>> diff --git a/HACKING b/HACKING
>>>> index 12fbc8a..e59bc34 100644
>>>> --- a/HACKING
>>>> +++ b/HACKING
>>>> @@ -157,3 +157,34 @@ painful. These are:
>>>> * you may assume that integers are 2s complement representation
>>>> * you may assume that right shift of a signed integer duplicates
>>>> the sign bit (ie it is an arithmetic shift, not a logical shift)
>>>> +
>>>> +7. Error reporting
>>>> +
>>>> +QEMU provides two different mechanisms for reporting errors. You
>>>> should use one
>>>> +of these mechanisms instead of manually reporting them (i.e., do not use
>>>> +'printf', 'exit' or 'abort').
>>>> +
>>>> +7.1. Errors in user inputs
>>>> +
>>>> +QEMU provides the functions in "include/qemu/error-report.h" to
>>>> report errors
>>>> +related to inputs provided by the user (e.g., command line arguments or
>>>> +configuration files).
>>>> +
>>>> +These functions generate error messages with a uniform format
>>>> that can reference
>>>> +a location on the offending input.
>>>> +
>>>> +7.2. Other errors
>>>> +
>>>> +QEMU provides the functions in "include/qapi/error.h" to report
>>>> other types of
>>>> +errors (i.e., not triggered by command line arguments or
>>>> configuration files).
>>>> +
>>>> +Functions in this header are used to accumulate error messages in
>>>> an 'Error'
>>>> +object, which can be propagated up the call chain where it is
>>>> finally reported.
>>>> +
>>>> +In its simplest form, you can immediately report an error with:
>>>> +
>>>> +    error_setg(&error_warn, "Error with %s", "arguments");
>>>> +
>>>> +See the "include/qapi/error.h" header for additional convenience
>>>> functions and
>>>> +special arguments. Specially, see 'error_fatal' and 'error_abort'
>>>> to show errors
>>>> +and immediately terminate QEMU.
>>> 
>>> I don't think this "Errors in user inputs" vs "Other errors" distinction
>>> really makes sense. Whether an error raised in a piece of code is related
>>> to user input or not is almost impossible to determine in practice. So as
>>> a rule to follow it is not practical.
>>> 
>>> AFAIK, include/qemu/error-report.h is the historical failed experiment
>>> in structured error reporting, while  include/qapi/error.h is the new
>>> preferred error reporting system that everything should be using.
>
>> Not quite :)
>
>> error-report.h predates the failed experiment.  The experiment was
>> actually error.h, but we've since reworked it as far as practical.  One
>> leftover is still clearly visible: error classes.  Their use is strongly
>> discouraged.
>
>> error.h is for passing around errors within QEMU.  error-report.h is for
>> reporting them to human users via stderr or HMP.  Reporting them via QMP
>> is encapsulated within the QMP monitor code.
>
>> error.h has a few convenience interfaces to report to human users.
>> They're implemented on top of error-report.h.
>
>>> On this basis, I'd simply say that include/qemu/error-report.h is
>>> legacy code that should no longer be used, and that new code should
>>> use include/qapi/error.h exclusively and existing code converted
>>> where practical.
>
>> Absolutely not :)
>
>> 1. Use the simplest suitable method to communicate success / failure
>> within code.  Stick to common methods: non-negative / -1, non-negative /
>> -errno, non-null / null, Error ** parameter.
>
>> Example: when a function returns a non null-pointer on success, and it
>> can fail only one way (as far as the caller is concerned), returning
>> null on failure is just fine, and certainly simpler and a lot easier on
>> the eyes than Error **.
>
>> Example: when a function's callers need to report details on failure
>> only the function really knows, use Error **, and set suitable errors.
>
>> 2. Use error-report.h to report errors to stderr or an HMP monitor.
>
>> Do not report an error when you're also passing an error for somebody
>> else to handle!  Leave the reporting to the place that consumes the
>> error you pass.
>
> I'm sorry, but I don't see a clear consensus on what should be used.  I ended up
> adding a new special error object named 'error_warn'.  My hope is that this will
> allow most uses of raw "error-report.h" functions (e.g., 'error_printf') and raw
> 'printf' to converge onto "error.h".

I don't see convergence to error.h as a goal.

error.h is for passing errors around, error-report.h is for reporting
them to humans.  Some of error.h's convenience features admittedly blur
the boundary between the two.

> So what about this shorter version for the docs:
>
> --------------------------------------------------
> 7. Error reporting
>
> QEMU provides a variety of interfaces for reporting errors in a uniform
> format. You should use one of these interfaces instead of manually reporting
> them (i.e., do not use 'printf', 'exit' or 'abort').
>
> The simplest form is reporting non-terminating errors (from "qapi/error.h"):
>
>     error_setg(&error_warn, "error for value %d", 1);

&error_warn should be discussed in review of PATCH 1.  Haven't gotten
around to it, sorry.

> There also are two convenience arguments for errors that must terminate QEMU:
>
>     // calls exit()
>     error_setg(&error_fatal, "error for value %d", 1);
>
>     // calls abort() and shows source code information
>     error_setg(&error_abort, "error for value %d", 1);
>
> You should _not_ use terminating functions for errors that are (or can be)
> triggered by guest code (e.g., some unimplemented corner case in guest code
> translation or device code). Otherwise that can be abused by guest code to force
> QEMU to terminate.
>
> The "qapi/error.h" header contains more details for other more complex usage
> patterns (e.g., propagating error messages across functions).
>
> You can also use the location management functions in header
> "qemu/error-report.h" to provide additional information related to inputs
> provided by the user (e.g., command line arguments or configuration files).
> --------------------------------------------------
>
> Thanks,
>   Lluis