From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Cc: James Hogan <james.hogan@imgtec.com>,
Aurelien Jarno <aurelien@aurel32.net>
Subject: [Qemu-devel] [PULL 1/2] target-mips: Fix exceptions while UX=0
Date: Tue, 24 Nov 2015 16:59:57 +0000 [thread overview]
Message-ID: <1448384398-1783-2-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1448384398-1783-1-git-send-email-leon.alrae@imgtec.com>
From: James Hogan <james.hogan@imgtec.com>
Commit 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit address
wrapping") added a new hflag MIPS_HFLAG_AWRAP, which indicates that
64-bit addressing is disallowed in the current mode, so hflag users
don't need to worry about the complexities of working that out, for
example checking both MIPS_HFLAG_KSU and MIPS_HFLAG_UX.
However when exceptions are taken outside of exception level,
mips_cpu_do_interrupt() manipulates the env->hflags directly rather than
using compute_hflags() to update them, and this code wasn't updated
accordingly. As a result, when UX is cleared, MIPS_HFLAG_AWRAP is set,
but it doesn't get cleared on entry back into kernel mode due to an
exception. Kernel mode then cannot access the 64-bit segments resulting
in a nested exception loop. The same applies to errors and debug
exceptions.
Fix by updating mips_cpu_do_interrupt() to clear the MIPS_HFLAG_WRAP
flag when necessary, according to compute_hflags().
Fixes: 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit...")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
target-mips/helper.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/target-mips/helper.c b/target-mips/helper.c
index b3fe816..118072a 100644
--- a/target-mips/helper.c
+++ b/target-mips/helper.c
@@ -524,6 +524,10 @@ void mips_cpu_do_interrupt(CPUState *cs)
enter_debug_mode:
if (env->insn_flags & ISA_MIPS3) {
env->hflags |= MIPS_HFLAG_64;
+ if (!(env->insn_flags & ISA_MIPS64R6) ||
+ env->CP0_Status & (1 << CP0St_KX)) {
+ env->hflags &= ~MIPS_HFLAG_AWRAP;
+ }
}
env->hflags |= MIPS_HFLAG_DM | MIPS_HFLAG_CP0;
env->hflags &= ~(MIPS_HFLAG_KSU);
@@ -548,6 +552,10 @@ void mips_cpu_do_interrupt(CPUState *cs)
env->CP0_Status |= (1 << CP0St_ERL) | (1 << CP0St_BEV);
if (env->insn_flags & ISA_MIPS3) {
env->hflags |= MIPS_HFLAG_64;
+ if (!(env->insn_flags & ISA_MIPS64R6) ||
+ env->CP0_Status & (1 << CP0St_KX)) {
+ env->hflags &= ~MIPS_HFLAG_AWRAP;
+ }
}
env->hflags |= MIPS_HFLAG_CP0;
env->hflags &= ~(MIPS_HFLAG_KSU);
@@ -725,6 +733,10 @@ void mips_cpu_do_interrupt(CPUState *cs)
env->CP0_Status |= (1 << CP0St_EXL);
if (env->insn_flags & ISA_MIPS3) {
env->hflags |= MIPS_HFLAG_64;
+ if (!(env->insn_flags & ISA_MIPS64R6) ||
+ env->CP0_Status & (1 << CP0St_KX)) {
+ env->hflags &= ~MIPS_HFLAG_AWRAP;
+ }
}
env->hflags |= MIPS_HFLAG_CP0;
env->hflags &= ~(MIPS_HFLAG_KSU);
--
2.1.0
next prev parent reply other threads:[~2015-11-24 17:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-24 16:59 [Qemu-devel] [PULL 0/2] target-mips queue Leon Alrae
2015-11-24 16:59 ` Leon Alrae [this message]
2015-11-24 16:59 ` [Qemu-devel] [PULL 2/2] target-mips: flush QEMU TLB when disabling 64-bit addressing Leon Alrae
2015-11-24 17:36 ` [Qemu-devel] [PULL 0/2] target-mips queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448384398-1783-2-git-send-email-leon.alrae@imgtec.com \
--to=leon.alrae@imgtec.com \
--cc=aurelien@aurel32.net \
--cc=james.hogan@imgtec.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).