From: Shannon Zhao <zhaoshenglong@huawei.com>
To: qemu-arm@nongnu.org, peter.maydell@linaro.org, mst@redhat.com,
imammedo@redhat.com, wei@redhat.com
Cc: peter.huangpeng@huawei.com, zhaoshenglong@huawei.com,
qemu-devel@nongnu.org, graeme.gregory@linaro.org,
shannon.zhao@linaro.org
Subject: [Qemu-devel] [PATCH v4 4/8] ACPI: Add GPIO Connection Descriptor
Date: Mon, 7 Dec 2015 15:39:48 +0800 [thread overview]
Message-ID: <1449473992-11560-5-git-send-email-zhaoshenglong@huawei.com> (raw)
In-Reply-To: <1449473992-11560-1-git-send-email-zhaoshenglong@huawei.com>
From: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
---
hw/acpi/aml-build.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
include/hw/acpi/aml-build.h | 20 +++++++++++++
2 files changed, 88 insertions(+)
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index a00a0ab..4e1469a 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -565,6 +565,74 @@ Aml *aml_call4(const char *method, Aml *arg1, Aml *arg2, Aml *arg3, Aml *arg4)
}
/*
+ * ACPI 5.0: 6.4.3.8.1 GPIO Connection Descriptor
+ * Type 1, Large Item Name 0xC
+ */
+
+static Aml *aml_gpio_connection(AmlGpioConnectionType type,
+ AmlConsumerAndProducer con_and_pro,
+ uint8_t flags, AmlPinConfig pin_config,
+ uint16_t output_drive,
+ uint16_t debounce_timeout,
+ const uint32_t pin_list[], uint32_t pin_count,
+ const char *resource_source_name,
+ const uint8_t *vendor_data,
+ uint16_t vendor_data_len)
+{
+ Aml *var = aml_alloc();
+ const uint16_t min_desc_len = 0x16;
+ uint16_t resource_source_name_len, length;
+ uint16_t pin_table_offset, resource_source_name_offset, vendor_data_offset;
+ uint32_t i;
+
+ assert(resource_source_name);
+ resource_source_name_len = strlen(resource_source_name) + 1;
+ length = min_desc_len + resource_source_name_len + vendor_data_len;
+ pin_table_offset = min_desc_len + 1;
+ resource_source_name_offset = pin_table_offset + pin_count * 2;
+ vendor_data_offset = resource_source_name_offset + resource_source_name_len;
+
+ build_append_byte(var->buf, 0x8C); /* GPIO Connection Descriptor */
+ build_append_int_noprefix(var->buf, length, 2); /* Length */
+ build_append_byte(var->buf, 1); /* Revision ID */
+ build_append_byte(var->buf, type); /* GPIO Connection Type */
+ /* General Flags (2 bytes) */
+ build_append_int_noprefix(var->buf, con_and_pro, 2);
+ /* Interrupt and IO Flags (2 bytes) */
+ build_append_int_noprefix(var->buf, flags, 2);
+ /* Pin Configuration 0 = Default 1 = Pull-up 2 = Pull-down 3 = No Pull */
+ build_append_byte(var->buf, pin_config);
+ /* Output Drive Strength (2 bytes) */
+ build_append_int_noprefix(var->buf, output_drive, 2);
+ /* Debounce Timeout (2 bytes) */
+ build_append_int_noprefix(var->buf, debounce_timeout, 2);
+ /* Pin Table Offset (2 bytes) */
+ build_append_int_noprefix(var->buf, pin_table_offset, 2);
+ build_append_byte(var->buf, 0); /* Resource Source Index */
+ /* Resource Source Name Offset (2 bytes) */
+ build_append_int_noprefix(var->buf, resource_source_name_offset, 2);
+ /* Vendor Data Offset (2 bytes) */
+ build_append_int_noprefix(var->buf, vendor_data_offset, 2);
+ /* Vendor Data Length (2 bytes) */
+ build_append_int_noprefix(var->buf, vendor_data_len, 2);
+ /* Pin Number (2n bytes)*/
+ for (i = 0; i < pin_count; i++) {
+ build_append_int_noprefix(var->buf, pin_list[i], 2);
+ }
+
+ /* Resource Source Name */
+ build_append_namestring(var->buf, "%s", resource_source_name);
+ build_append_byte(var->buf, '\0');
+
+ /* Vendor-defined Data */
+ if (vendor_data != NULL) {
+ g_array_append_vals(var->buf, vendor_data, vendor_data_len);
+ }
+
+ return var;
+}
+
+/*
* ACPI 1.0b: 6.4.3.4 32-Bit Fixed Location Memory Range Descriptor
* (Type 1, Large Item Name 0x6)
*/
diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
index 1b632dc..a8dba9e 100644
--- a/include/hw/acpi/aml-build.h
+++ b/include/hw/acpi/aml-build.h
@@ -148,6 +148,26 @@ typedef enum {
AML_SHARED_AND_WAKE = 3,
} AmlShared;
+/*
+ * ACPI 5.0: Table 6-189 GPIO Connection Descriptor Definition
+ * GPIO Connection Type
+ */
+typedef enum {
+ AML_INTERRUPT_CONNECTION = 0,
+ AML_IO_CONNECTION = 1,
+} AmlGpioConnectionType;
+
+/*
+ * ACPI 5.0: Table 6-189 GPIO Connection Descriptor Definition
+ * _PPI field definition
+ */
+typedef enum {
+ AML_PULL_DEFAULT = 0,
+ AML_PULL_UP = 1,
+ AML_PULL_DOWN = 2,
+ AML_PULL_NONE = 3,
+} AmlPinConfig;
+
typedef
struct AcpiBuildTables {
GArray *table_data;
--
2.0.4
next prev parent reply other threads:[~2015-12-07 7:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 7:39 [Qemu-devel] [PATCH v4 0/8] Add system_powerdown support on ARM for ACPI and DT Shannon Zhao
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 1/8] ARM: Virt: Add a GPIO controller Shannon Zhao
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 2/8] ARM: ACPI: Add GPIO controller in ACPI DSDT table Shannon Zhao
2015-12-10 13:22 ` Igor Mammedov
2015-12-10 19:16 ` Wei Huang
2015-12-10 20:13 ` Igor Mammedov
2015-12-11 1:35 ` Shannon Zhao
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 3/8] ARM: ACPI: Add power button device " Shannon Zhao
2015-12-10 20:23 ` Igor Mammedov
2015-12-07 7:39 ` Shannon Zhao [this message]
2015-12-10 20:14 ` [Qemu-devel] [PATCH v4 4/8] ACPI: Add GPIO Connection Descriptor Igor Mammedov
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 5/8] ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection Shannon Zhao
2015-12-10 20:16 ` Igor Mammedov
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 6/8] ARM: ACPI: Add _E03 for Power Button Shannon Zhao
2015-12-10 20:09 ` Igor Mammedov
2015-12-11 1:52 ` Shannon Zhao
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 7/8] ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3 Shannon Zhao
2015-12-07 7:39 ` [Qemu-devel] [PATCH v4 8/8] ARM: Virt: Add gpio-keys node for Poweroff using DT Shannon Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449473992-11560-5-git-send-email-zhaoshenglong@huawei.com \
--to=zhaoshenglong@huawei.com \
--cc=graeme.gregory@linaro.org \
--cc=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=peter.huangpeng@huawei.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=shannon.zhao@linaro.org \
--cc=wei@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).