From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 23/45] cris: avoid "naked" qemu_log
Date: Thu, 17 Dec 2015 18:46:19 +0100 [thread overview]
Message-ID: <1450374401-31352-24-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1450374401-31352-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/char/etraxfs_ser.c | 2 +-
target-cris/helper.h | 1 -
target-cris/op_helper.c | 5 -----
target-cris/translate.c | 2 +-
target-cris/translate_v10.c | 2 +-
5 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/hw/char/etraxfs_ser.c b/hw/char/etraxfs_ser.c
index 562021e..d4d875e 100644
--- a/hw/char/etraxfs_ser.c
+++ b/hw/char/etraxfs_ser.c
@@ -165,7 +165,7 @@ static void serial_receive(void *opaque, const uint8_t *buf, int size)
/* Got a byte. */
if (s->rx_fifo_len >= 16) {
- qemu_log("WARNING: UART dropped char.\n");
+ D(qemu_log("WARNING: UART dropped char.\n"));
return;
}
diff --git a/target-cris/helper.h b/target-cris/helper.h
index 0b383b2..ff35956 100644
--- a/target-cris/helper.h
+++ b/target-cris/helper.h
@@ -1,7 +1,6 @@
DEF_HELPER_2(raise_exception, void, env, i32)
DEF_HELPER_2(tlb_flush_pid, void, env, i32)
DEF_HELPER_2(spc_write, void, env, i32)
-DEF_HELPER_3(dump, void, i32, i32, i32)
DEF_HELPER_1(rfe, void, env)
DEF_HELPER_1(rfn, void, env)
diff --git a/target-cris/op_helper.c b/target-cris/op_helper.c
index 5c0c14d..2296677 100644
--- a/target-cris/op_helper.c
+++ b/target-cris/op_helper.c
@@ -91,11 +91,6 @@ void helper_spc_write(CPUCRISState *env, uint32_t new_spc)
#endif
}
-void helper_dump(uint32_t a0, uint32_t a1, uint32_t a2)
-{
- qemu_log("%s: a0=%x a1=%x\n", __func__, a0, a1);
-}
-
/* Used by the tlb decoder. */
#define EXTRACT_FIELD(src, start, end) \
(((src) >> start) & ((1 << (end - start + 1)) - 1))
diff --git a/target-cris/translate.c b/target-cris/translate.c
index 354c86d..2429931 100644
--- a/target-cris/translate.c
+++ b/target-cris/translate.c
@@ -779,7 +779,7 @@ static void cris_alu_op_exec(DisasContext *dc, int op,
t_gen_subx_carry(dc, dst);
break;
default:
- qemu_log("illegal ALU op.\n");
+ qemu_log_mask(LOG_GUEST_ERROR, "illegal ALU op.\n");
BUG();
break;
}
diff --git a/target-cris/translate_v10.c b/target-cris/translate_v10.c
index 3ab1c39..df20bdc 100644
--- a/target-cris/translate_v10.c
+++ b/target-cris/translate_v10.c
@@ -58,7 +58,7 @@ static inline int dec10_size(unsigned int size)
static inline void cris_illegal_insn(DisasContext *dc)
{
- qemu_log("illegal insn at pc=%x\n", dc->pc);
+ qemu_log_mask(LOG_GUEST_ERROR, "illegal insn at pc=%x\n", dc->pc);
t_gen_raise_exception(EXCP_BREAK);
}
--
2.5.0
next prev parent reply other threads:[~2015-12-17 17:47 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 17:45 [Qemu-devel] [PULL 00/45] KVM, memory, SCSI, qemu_log, Coverity patches for 2015-12-17 Paolo Bonzini
2015-12-17 17:45 ` [Qemu-devel] [PULL 01/45] exec: Eliminate qemu_ram_free_from_ptr() Paolo Bonzini
2015-12-17 17:45 ` [Qemu-devel] [PULL 02/45] memory: Eliminate memory_region_destructor_ram_from_ptr() Paolo Bonzini
2015-12-17 17:45 ` [Qemu-devel] [PULL 03/45] exec: Remove unnecessary RAM_FILE flag Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 04/45] kvm-all: PAGE_SIZE should be real host page size Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 05/45] memory: emulate ioeventfd Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 06/45] vmw_pvscsi: Set device subsystem and revision Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 07/45] vmw_pvscsi: Change offset of msi pci capability Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 08/45] vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property Paolo Bonzini
2015-12-17 18:08 ` Eric Blake
2015-12-18 6:21 ` Shmulik Ladkani
2015-12-17 17:46 ` [Qemu-devel] [PULL 09/45] vmw_pvscsi: coding: Introduce PVSCSIClass Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 10/45] vmw_pvscsi: The pvscsi device is a PCIE endpoint Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 11/45] vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property Paolo Bonzini
2015-12-17 18:09 ` Eric Blake
2015-12-17 17:46 ` [Qemu-devel] [PULL 12/45] linux-headers: update from kvm/next Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 13/45] target-i386/kvm: Hyper-V SynIC MSR's support Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 14/45] kvm: Hyper-V SynIC irq routing support Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 15/45] target-i386/hyperv: Hyper-V SynIC SINT routing and vcpu exit Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 16/45] hw/misc: Hyper-V test device 'hyperv-testdev' Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 17/45] target-i386/kvm: Hyper-V SynIC timers MSR's support Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 18/45] kvm: add support for -machine kernel_irqchip=split Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 19/45] kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 20/45] qemu-char: append opt to stop truncation of serial file Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 21/45] qemu-log: introduce qemu_log_separate Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 22/45] alpha: convert "naked" qemu_log to tracepoint Paolo Bonzini
2015-12-17 17:46 ` Paolo Bonzini [this message]
2015-12-17 17:46 ` [Qemu-devel] [PULL 24/45] microblaze: avoid "naked" qemu_log Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 25/45] s390x: " Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 26/45] ppc: cleanup logging Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 27/45] tricore: avoid "naked" qemu_log Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 28/45] xtensa: " Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 29/45] user: introduce "-d page" Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 30/45] linux-user: avoid "naked" qemu_log Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 31/45] linux-user: convert DEBUG_SIGNAL logging to tracepoints Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 32/45] exec: always call qemu_get_ram_ptr within rcu_read_lock Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 33/45] exec: make qemu_ram_ptr_length more similar to qemu_get_ram_ptr Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 34/45] memory: reorder MemoryRegion fields Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 35/45] memory: avoid unnecessary object_ref/unref Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 36/45] memory: split address_space_read and address_space_write Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 37/45] memory: extract first iteration of " Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 38/45] memory: inline a few small accessors Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 39/45] memory: try to inline constant-length reads Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 40/45] rcu: optimize rcu_read_lock Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 41/45] target-i386: kvm: clear unusable segments' flags in migration Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 42/45] scsi: use scsi_req_cancel_async when purging requests Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 43/45] scsi: always call notifier on async cancellation Paolo Bonzini
2015-12-18 0:57 ` Fam Zheng
2015-12-18 6:05 ` Paolo Bonzini
2015-12-18 7:51 ` Fam Zheng
2015-12-17 17:46 ` [Qemu-devel] [PULL 44/45] coverity: Model g_poll() Paolo Bonzini
2015-12-17 17:46 ` [Qemu-devel] [PULL 45/45] coverity: Model g_memdup() Paolo Bonzini
2015-12-17 19:55 ` [Qemu-devel] [PULL 00/45] KVM, memory, SCSI, qemu_log, Coverity patches for 2015-12-17 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450374401-31352-24-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).