[Qemu-devel] [PULL 34/48] iotests: Extend test 112 for qemu-img amend

[Kevin Wolf <kwolf@redhat.com>]

From: Max Reitz <mreitz@redhat.com>

Add tests for conversion between different refcount widths.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 tests/qemu-iotests/112     | 109 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/112.out |  71 +++++++++++++++++++++++++++++
 2 files changed, 180 insertions(+)

diff --git a/tests/qemu-iotests/112 b/tests/qemu-iotests/112
index 3f054a3..34ba06a 100755
--- a/tests/qemu-iotests/112
+++ b/tests/qemu-iotests/112
@@ -180,6 +180,115 @@ $QEMU_IMG snapshot -c foo "$TEST_IMG"
 # leaked (refcount=UINT64_MAX reference=1)
 _check_test_img
 
+echo
+echo '=== Amend from refcount_bits=16 to refcount_bits=1 ==='
+echo
+
+_make_test_img 64M
+print_refcount_bits
+
+$QEMU_IO -c 'write 16M 32M' "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG amend -o refcount_bits=1 "$TEST_IMG"
+_check_test_img
+print_refcount_bits
+
+echo
+echo '=== Amend from refcount_bits=1 to refcount_bits=64 ==='
+echo
+
+$QEMU_IMG amend -o refcount_bits=64 "$TEST_IMG"
+_check_test_img
+print_refcount_bits
+
+echo
+echo '=== Amend to compat=0.10 ==='
+echo
+
+# Should not work because refcount_bits needs to be 16 for compat=0.10
+$QEMU_IMG amend -o compat=0.10 "$TEST_IMG"
+print_refcount_bits
+# Should work
+$QEMU_IMG amend -o compat=0.10,refcount_bits=16 "$TEST_IMG"
+_check_test_img
+print_refcount_bits
+
+# Get back to compat=1.1 and refcount_bits=16
+$QEMU_IMG amend -o compat=1.1 "$TEST_IMG"
+print_refcount_bits
+# Should not work
+$QEMU_IMG amend -o refcount_bits=32,compat=0.10 "$TEST_IMG"
+print_refcount_bits
+
+echo
+echo '=== Amend with snapshot ==='
+echo
+
+$QEMU_IMG snapshot -c foo "$TEST_IMG"
+# Just to have different refcounts across the image
+$QEMU_IO -c 'write 0 16M' "$TEST_IMG" | _filter_qemu_io
+
+# Should not work (may work in the future by first decreasing all refcounts so
+# they fit into the target range by copying them)
+$QEMU_IMG amend -o refcount_bits=1 "$TEST_IMG"
+_check_test_img
+print_refcount_bits
+
+# Should work
+$QEMU_IMG amend -o refcount_bits=2 "$TEST_IMG"
+_check_test_img
+print_refcount_bits
+
+echo
+echo '=== Testing too many references for check ==='
+echo
+
+IMGOPTS="$IMGOPTS,refcount_bits=1" _make_test_img 64M
+print_refcount_bits
+
+# This cluster should be created at 0x50000
+$QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io
+# Now make the second L2 entry (the L2 table should be at 0x40000) point to that
+# cluster, so we have two references
+poke_file "$TEST_IMG" $((0x40008)) "\x80\x00\x00\x00\x00\x05\x00\x00"
+
+# This should say "please use amend"
+_check_test_img -r all
+
+# So we do that
+$QEMU_IMG amend -o refcount_bits=2 "$TEST_IMG"
+print_refcount_bits
+
+# And try again
+_check_test_img -r all
+
+echo
+echo '=== Multiple walks necessary during amend ==='
+echo
+
+IMGOPTS="$IMGOPTS,refcount_bits=1,cluster_size=512" _make_test_img 64k
+
+# Cluster 0 is the image header, clusters 1 to 4 are used by the L1 table, a
+# single L2 table, the reftable and a single refblock. This creates 58 data
+# clusters (actually, the L2 table is created here, too), so in total there are
+# then 63 used clusters in the image. With a refcount width of 64, one refblock
+# describes 64 clusters (512 bytes / 64 bits/entry = 64 entries), so this will
+# make the first refblock in the amended image have exactly one free entry.
+$QEMU_IO -c "write 0 $((58 * 512))" "$TEST_IMG" | _filter_qemu_io
+
+# Now change the refcount width; since the first new refblock will have exactly
+# one free entry, that entry will be used to store its own reference. No other
+# refblocks are needed, so then the new reftable will be allocated; since the
+# first new refblock is completely filled up, this will require a new refblock
+# which is why the refcount width changing function will need to run through
+# everything one more time until the allocations are stable.
+# Having more walks than usual should be visible as regressing progress (from
+# 66.67 % (2/3 walks) to 50.00 % (2/4 walks)).
+$QEMU_IMG amend -o refcount_bits=64 -p "$TEST_IMG" | tr '\r' '\n' \
+                                                   | grep -A 1 '66.67'
+print_refcount_bits
+
+_check_test_img
+
 
 # success, all done
 echo '*** done'
diff --git a/tests/qemu-iotests/112.out b/tests/qemu-iotests/112.out
index 8dd3df0..81b04d1 100644
--- a/tests/qemu-iotests/112.out
+++ b/tests/qemu-iotests/112.out
@@ -81,4 +81,75 @@ Leaked cluster 6 refcount=1 reference=0
 
 2 leaked clusters were found on the image.
 This means waste of disk space, but no harm to data.
+
+=== Amend from refcount_bits=16 to refcount_bits=1 ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+refcount bits: 16
+wrote 33554432/33554432 bytes at offset 16777216
+32 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+No errors were found on the image.
+refcount bits: 1
+
+=== Amend from refcount_bits=1 to refcount_bits=64 ===
+
+No errors were found on the image.
+refcount bits: 64
+
+=== Amend to compat=0.10 ===
+
+qemu-img: compat=0.10 requires refcount_bits=16
+qemu-img: Error while amending options: Operation not supported
+refcount bits: 64
+No errors were found on the image.
+refcount bits: 16
+refcount bits: 16
+qemu-img: Different refcount widths than 16 bits require compatibility level 1.1 or above (use compat=1.1 or greater)
+qemu-img: Error while amending options: Invalid argument
+refcount bits: 16
+
+=== Amend with snapshot ===
+
+wrote 16777216/16777216 bytes at offset 0
+16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-img: Cannot decrease refcount entry width to 1 bits: Cluster at offset 0x50000 has a refcount of 2
+qemu-img: Error while amending options: Invalid argument
+No errors were found on the image.
+refcount bits: 16
+No errors were found on the image.
+refcount bits: 2
+
+=== Testing too many references for check ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+refcount bits: 1
+wrote 65536/65536 bytes at offset 0
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+ERROR: overflow cluster offset=0x50000
+Use qemu-img amend to increase the refcount entry width or qemu-img convert to create a clean copy if the image cannot be opened for writing
+
+1 errors were found on the image.
+Data may be corrupted, or further writes to the image may corrupt it.
+refcount bits: 2
+ERROR cluster 5 refcount=1 reference=2
+Repairing cluster 5 refcount=1 reference=2
+Repairing OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=2
+Repairing OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=2
+The following inconsistencies were found and repaired:
+
+    0 leaked clusters
+    3 corruptions
+
+Double checking the fixed image now...
+No errors were found on the image.
+
+=== Multiple walks necessary during amend ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65536
+wrote 29696/29696 bytes at offset 0
+29 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+    (66.67/100%)
+    (50.00/100%)
+refcount bits: 64
+No errors were found on the image.
 *** done
-- 
1.8.3.1