[Qemu-devel] [PATCH v2 1/4] net/vmxnet3: return 1 on device activation failure

[Miao Yan <yanmiaobest@gmail.com>]

When reading device status, 0 means device is successfully
activated and 1 means error.

This behavior can be observed by the following steps:

1) run a Linux distro on esxi server
2) modify vmxnet3 Linux driver to give it an invalid
   address to 'adapter->shared_pa' which is the
   shared memory for guest/host communication

This will trigger device activation failure and kernel
log will have the following message:

   [ 7138.403256] vmxnet3 0000:03:00.0 eth1: Failed to activate dev: error 1

So return 1 on device activation failure instead of -1;

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
 hw/net/vmxnet3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
index e168285..9185408 100644
--- a/hw/net/vmxnet3.c
+++ b/hw/net/vmxnet3.c
@@ -1652,7 +1652,7 @@ static uint64_t vmxnet3_get_command_status(VMXNET3State *s)
 
     switch (s->last_command) {
     case VMXNET3_CMD_ACTIVATE_DEV:
-        ret = (s->device_active) ? 0 : -1;
+        ret = (s->device_active) ? 0 : 1;
         VMW_CFPRN("Device active: %" PRIx64, ret);
         break;
 
-- 
1.9.1