[Qemu-devel] [PULL 10/10] sdhci: add optional quirk property to disable card insertion/removal interrupts

[Stefan Hajnoczi <stefanha@redhat.com>]

From: Andrew Baumann <Andrew.Baumann@microsoft.com>

This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/sd/sdhci.c         | 5 ++++-
 include/hw/sd/sdhci.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index dd83e89..7acb4d7 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -193,7 +193,9 @@ static void sdhci_reset(SDHCIState *s)
      * initialization */
     memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
 
-    sd_set_cb(s->card, s->ro_cb, s->eject_cb);
+    if (!s->noeject_quirk) {
+        sd_set_cb(s->card, s->ro_cb, s->eject_cb);
+    }
     s->data_count = 0;
     s->stopped_state = sdhc_not_stopped;
 }
@@ -1276,6 +1278,7 @@ static Property sdhci_sysbus_properties[] = {
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_PROP_BOOL("noeject-quirk", SDHCIState, noeject_quirk, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index e78d938..ffd1f80 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -77,6 +77,7 @@ typedef struct SDHCIState {
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
     uint8_t  stopped_state;/* Current SDHC state */
+    bool     noeject_quirk;/* Quirk to disable card insert/remove interrupts */
     /* Buffer Data Port Register - virtual access point to R and W buffers */
     /* Software Reset Register - always reads as 0 */
     /* Force Event Auto CMD12 Error Interrupt Reg - write only */
-- 
2.5.0