From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: peter.maydell@linaro.org
Cc: xen-devel@lists.xensource.com, qemu-devel@nongnu.org,
Jan Beulich <jbeulich@suse.com>,
stefano.stabellini@eu.citrix.com
Subject: [Qemu-devel] [PULL 3/4] xen/pass-through: correctly deal with RW1C bits
Date: Tue, 22 Dec 2015 16:22:16 +0000 [thread overview]
Message-ID: <1450801337-26849-3-git-send-email-stefano.stabellini@eu.citrix.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1512221613260.3096@kaball.uk.xensource.com>
From: Jan Beulich <JBeulich@suse.com>
Introduce yet another mask for them, so that the generic routine can
handle them, at once rendering xen_pt_pmcsr_reg_write() superfluous.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
hw/xen/xen_pt.h | 2 ++
hw/xen/xen_pt_config_init.c | 38 ++++++++++++--------------------------
2 files changed, 14 insertions(+), 26 deletions(-)
diff --git a/hw/xen/xen_pt.h b/hw/xen/xen_pt.h
index 4f922f4..3749711 100644
--- a/hw/xen/xen_pt.h
+++ b/hw/xen/xen_pt.h
@@ -113,6 +113,8 @@ struct XenPTRegInfo {
uint32_t res_mask;
/* reg read only field mask (ON:RO/ROS, OFF:other) */
uint32_t ro_mask;
+ /* reg read/write-1-clear field mask (ON:RW1C/RW1CS, OFF:other) */
+ uint32_t rw1c_mask;
/* reg emulate field mask (ON:emu, OFF:passthrough) */
uint32_t emu_mask;
xen_pt_conf_reg_init init;
diff --git a/hw/xen/xen_pt_config_init.c b/hw/xen/xen_pt_config_init.c
index 4fd7206..185a698 100644
--- a/hw/xen/xen_pt_config_init.c
+++ b/hw/xen/xen_pt_config_init.c
@@ -179,7 +179,8 @@ static int xen_pt_byte_reg_write(XenPCIPassthroughState *s, XenPTReg *cfg_entry,
*data = XEN_PT_MERGE_VALUE(*val, *data, writable_mask);
/* create value for writing to I/O device register */
- *val = XEN_PT_MERGE_VALUE(*val, dev_value, throughable_mask);
+ *val = XEN_PT_MERGE_VALUE(*val, dev_value & ~reg->rw1c_mask,
+ throughable_mask);
return 0;
}
@@ -197,7 +198,8 @@ static int xen_pt_word_reg_write(XenPCIPassthroughState *s, XenPTReg *cfg_entry,
*data = XEN_PT_MERGE_VALUE(*val, *data, writable_mask);
/* create value for writing to I/O device register */
- *val = XEN_PT_MERGE_VALUE(*val, dev_value, throughable_mask);
+ *val = XEN_PT_MERGE_VALUE(*val, dev_value & ~reg->rw1c_mask,
+ throughable_mask);
return 0;
}
@@ -215,7 +217,8 @@ static int xen_pt_long_reg_write(XenPCIPassthroughState *s, XenPTReg *cfg_entry,
*data = XEN_PT_MERGE_VALUE(*val, *data, writable_mask);
/* create value for writing to I/O device register */
- *val = XEN_PT_MERGE_VALUE(*val, dev_value, throughable_mask);
+ *val = XEN_PT_MERGE_VALUE(*val, dev_value & ~reg->rw1c_mask,
+ throughable_mask);
return 0;
}
@@ -633,6 +636,7 @@ static XenPTRegInfo xen_pt_emu_reg_header0[] = {
.init_val = 0x0000,
.res_mask = 0x0007,
.ro_mask = 0x06F8,
+ .rw1c_mask = 0xF900,
.emu_mask = 0x0010,
.init = xen_pt_status_reg_init,
.u.w.read = xen_pt_word_reg_read,
@@ -944,6 +948,7 @@ static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
.size = 2,
.res_mask = 0xFFC0,
.ro_mask = 0x0030,
+ .rw1c_mask = 0x000F,
.init = xen_pt_common_reg_init,
.u.w.read = xen_pt_word_reg_read,
.u.w.write = xen_pt_word_reg_write,
@@ -964,6 +969,7 @@ static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
.offset = PCI_EXP_LNKSTA,
.size = 2,
.ro_mask = 0x3FFF,
+ .rw1c_mask = 0xC000,
.init = xen_pt_common_reg_init,
.u.w.read = xen_pt_word_reg_read,
.u.w.write = xen_pt_word_reg_write,
@@ -1000,27 +1006,6 @@ static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
* Power Management Capability
*/
-/* write Power Management Control/Status register */
-static int xen_pt_pmcsr_reg_write(XenPCIPassthroughState *s,
- XenPTReg *cfg_entry, uint16_t *val,
- uint16_t dev_value, uint16_t valid_mask)
-{
- XenPTRegInfo *reg = cfg_entry->reg;
- uint16_t writable_mask = 0;
- uint16_t throughable_mask = get_throughable_mask(s, reg, valid_mask);
- uint16_t *data = cfg_entry->ptr.half_word;
-
- /* modify emulate register */
- writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
- *data = XEN_PT_MERGE_VALUE(*val, *data, writable_mask);
-
- /* create value for writing to I/O device register */
- *val = XEN_PT_MERGE_VALUE(*val, dev_value & ~PCI_PM_CTRL_PME_STATUS,
- throughable_mask);
-
- return 0;
-}
-
/* Power Management Capability reg static information table */
static XenPTRegInfo xen_pt_emu_reg_pm[] = {
/* Next Pointer reg */
@@ -1051,11 +1036,12 @@ static XenPTRegInfo xen_pt_emu_reg_pm[] = {
.size = 2,
.init_val = 0x0008,
.res_mask = 0x00F0,
- .ro_mask = 0xE10C,
+ .ro_mask = 0x610C,
+ .rw1c_mask = 0x8000,
.emu_mask = 0x810B,
.init = xen_pt_common_reg_init,
.u.w.read = xen_pt_word_reg_read,
- .u.w.write = xen_pt_pmcsr_reg_write,
+ .u.w.write = xen_pt_word_reg_write,
},
{
.size = 0,
--
1.7.10.4
next prev parent reply other threads:[~2015-12-22 16:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 16:20 [Qemu-devel] [PULL 0/4] xen-2015-12-22 Stefano Stabellini
2015-12-22 16:22 ` [Qemu-devel] [PULL 1/4] xen/MSI-X: latch MSI-X table writes Stefano Stabellini
2015-12-22 16:22 ` [Qemu-devel] [PULL 2/4] xen/MSI-X: really enforce alignment Stefano Stabellini
2015-12-22 16:22 ` Stefano Stabellini [this message]
2015-12-22 16:22 ` [Qemu-devel] [PULL 4/4] xen_disk: treat "vhd" as "vpc" Stefano Stabellini
2015-12-23 12:27 ` [Qemu-devel] [PULL 0/4] xen-2015-12-22 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450801337-26849-3-git-send-email-stefano.stabellini@eu.citrix.com \
--to=stefano.stabellini@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).