qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org, mreitz@redhat.com
Subject: [Qemu-devel] [PATCH 05/10] block: Inactivate BDS when migration completes
Date: Tue, 22 Dec 2015 17:46:21 +0100	[thread overview]
Message-ID: <1450802786-20893-6-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1450802786-20893-1-git-send-email-kwolf@redhat.com>

So far, live migration with shared storage meant that the image is in a
not-really-ready don't-touch-me state on the destination while the
source is still actively using it, but after completing the migration,
the image was fully opened on both sides. This is bad.

This patch adds a block driver callback to inactivate images on the
source before completing the migration. Inactivation means that it goes
to a state as if it was just live migrated to the qemu instance on the
source (i.e. BDRV_O_INCOMING is set). You're then supposed to continue
either on the source or on the destination, which takes ownership of the
image.

A typical migration looks like this now with respect to disk images:

1. Destination qemu is started, the image is opened with
   BDRV_O_INCOMING. The image is fully opened on the source.

2. Migration is about to complete. The source flushes the image and
   inactivates it. Now both sides have the image opened with
   BDRV_O_INCOMING and are expecting the other side to still modify it.

3. One side (the destination on success) continues and calls
   bdrv_invalidate_all() in order to take ownership of the image again.
   This removes BDRV_O_INCOMING on the resuming side; the flag remains
   set on the other side.

This ensures that the same image isn't written to by both instances
(unless both are resumed, but then you get what you deserve). This is
important because .bdrv_close for non-BDRV_O_INCOMING images could write
to the image file, which is definitely forbidden while another host is
using the image.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block.c                   | 34 ++++++++++++++++++++++++++++++++++
 include/block/block.h     |  1 +
 include/block/block_int.h |  1 +
 migration/migration.c     |  7 +++++++
 qmp.c                     | 12 ++++++++++++
 5 files changed, 55 insertions(+)

diff --git a/block.c b/block.c
index 554ed64..8b4288e 100644
--- a/block.c
+++ b/block.c
@@ -3304,6 +3304,40 @@ void bdrv_invalidate_cache_all(Error **errp)
     }
 }
 
+static int bdrv_inactivate(BlockDriverState *bs)
+{
+    int ret;
+
+    if (bs->drv->bdrv_inactivate) {
+        ret = bs->drv->bdrv_inactivate(bs);
+        if (ret < 0) {
+            return ret;
+        }
+    }
+
+    bs->open_flags |= BDRV_O_INCOMING;
+    return 0;
+}
+
+int bdrv_inactivate_all(void)
+{
+    BlockDriverState *bs;
+    int ret;
+
+    QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
+        AioContext *aio_context = bdrv_get_aio_context(bs);
+
+        aio_context_acquire(aio_context);
+        ret = bdrv_inactivate(bs);
+        aio_context_release(aio_context);
+        if (ret < 0) {
+            return ret;
+        }
+    }
+
+    return 0;
+}
+
 /**************************************************************/
 /* removable device support */
 
diff --git a/include/block/block.h b/include/block/block.h
index db8e096..0d00ac1 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -368,6 +368,7 @@ BlockAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
 /* Invalidate any cached metadata used by image formats */
 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp);
 void bdrv_invalidate_cache_all(Error **errp);
+int bdrv_inactivate_all(void);
 
 /* Ensure contents are flushed to disk.  */
 int bdrv_flush(BlockDriverState *bs);
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 9a1c466..a35ddc9 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -172,6 +172,7 @@ struct BlockDriver {
      * Invalidate any cached meta-data.
      */
     void (*bdrv_invalidate_cache)(BlockDriverState *bs, Error **errp);
+    int (*bdrv_inactivate)(BlockDriverState *bs);
 
     /*
      * Flushes all data that was already written to the OS all the way down to
diff --git a/migration/migration.c b/migration/migration.c
index c842499..309aa98 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1416,7 +1416,11 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
     *old_vm_running = runstate_is_running();
     global_state_store();
     ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
+    if (ret < 0) {
+        goto fail;
+    }
 
+    ret = bdrv_inactivate_all();
     if (ret < 0) {
         goto fail;
     }
@@ -1536,6 +1540,9 @@ static void migration_completion(MigrationState *s, int current_active_state,
         if (!ret) {
             ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
             if (ret >= 0) {
+                ret = bdrv_inactivate_all();
+            }
+            if (ret >= 0) {
                 qemu_file_set_rate_limit(s->file, INT64_MAX);
                 qemu_savevm_state_complete_precopy(s->file, false);
             }
diff --git a/qmp.c b/qmp.c
index 0a1fa19..39b8da1 100644
--- a/qmp.c
+++ b/qmp.c
@@ -192,6 +192,18 @@ void qmp_cont(Error **errp)
         }
     }
 
+    /* Continuing after completed migration. Images have been inactivated to
+     * allow the destination to take control. Need to get control back now. */
+    if (runstate_check(RUN_STATE_FINISH_MIGRATE) ||
+        runstate_check(RUN_STATE_POSTMIGRATE))
+    {
+        bdrv_invalidate_cache_all(&local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+
     if (runstate_check(RUN_STATE_INMIGRATE)) {
         autostart = 1;
     } else {
-- 
1.8.3.1

  parent reply	other threads:[~2015-12-22 16:46 UTC|newest]

Thread overview: 99+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-22 16:46 [Qemu-devel] [PATCH 00/10] qcow2: Implement image locking Kevin Wolf
2015-12-22 16:46 ` [Qemu-devel] [PATCH 01/10] qcow2: Write feature table only for v3 images Kevin Wolf
2015-12-22 20:20   ` Eric Blake
2016-01-11 15:20     ` Kevin Wolf
2015-12-22 16:46 ` [Qemu-devel] [PATCH 02/10] qcow2: Write full header on image creation Kevin Wolf
2015-12-22 20:25   ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 03/10] block: Assert no write requests under BDRV_O_INCOMING Kevin Wolf
2015-12-22 20:27   ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 04/10] block: Fix error path in bdrv_invalidate_cache() Kevin Wolf
2015-12-22 20:31   ` Eric Blake
2015-12-22 16:46 ` Kevin Wolf [this message]
2015-12-22 20:43   ` [Qemu-devel] [PATCH 05/10] block: Inactivate BDS when migration completes Eric Blake
2016-01-05 20:21     ` [Qemu-devel] [Qemu-block] " John Snow
2016-01-13 14:25       ` Kevin Wolf
2016-01-13 16:35         ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 06/10] qemu-img: Prepare for locked images Kevin Wolf
2015-12-22 16:57   ` Daniel P. Berrange
2015-12-22 17:00     ` Kevin Wolf
2015-12-22 21:06   ` Eric Blake
2016-01-11 15:49     ` Markus Armbruster
2016-01-11 16:05       ` Kevin Wolf
2016-01-12 15:20         ` Markus Armbruster
2016-01-12 17:36           ` Kevin Wolf
2016-01-13  8:44             ` Markus Armbruster
2016-01-13 14:19               ` Kevin Wolf
2016-01-14 13:07                 ` Markus Armbruster
2016-01-14 14:19                   ` Kevin Wolf
2016-01-11 16:22     ` Kevin Wolf
2015-12-22 21:41   ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 07/10] qcow2: Implement .bdrv_inactivate Kevin Wolf
2015-12-22 21:17   ` Eric Blake
2016-01-11 15:34     ` Kevin Wolf
2015-12-22 16:46 ` [Qemu-devel] [PATCH 08/10] qcow2: Fix BDRV_O_INCOMING handling in qcow2_invalidate_cache() Kevin Wolf
2015-12-22 21:22   ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 09/10] qcow2: Make image inaccessible after failed qcow2_invalidate_cache() Kevin Wolf
2015-12-22 21:24   ` Eric Blake
2015-12-22 16:46 ` [Qemu-devel] [PATCH 10/10] qcow2: Add image locking Kevin Wolf
2015-12-22 22:04   ` Eric Blake
2015-12-23  3:14 ` [Qemu-devel] [PATCH 00/10] qcow2: Implement " Fam Zheng
2015-12-23  7:35   ` [Qemu-devel] [Qemu-block] " Denis V. Lunev
2015-12-23  7:46     ` [Qemu-devel] [PATCH RFC 0/5] generic image locking and crash recovery Denis V. Lunev
2015-12-23  7:46       ` [Qemu-devel] [PATCH 1/5] block: added lock image option and callback Denis V. Lunev
2015-12-23 23:48         ` Eric Blake
2016-01-11 17:31         ` Kevin Wolf
2016-01-11 17:58           ` Daniel P. Berrange
2016-01-11 18:35             ` Kevin Wolf
2016-01-13  8:52               ` Markus Armbruster
2016-01-13  9:12                 ` Denis V. Lunev
2016-01-13  9:50                   ` Daniel P. Berrange
2016-01-13  9:51               ` Daniel P. Berrange
2016-01-12  5:38           ` Denis V. Lunev
2016-01-12 10:10             ` Kevin Wolf
2016-01-12 11:33               ` Fam Zheng
2016-01-12 12:24                 ` Denis V. Lunev
2016-01-12 12:28                 ` Kevin Wolf
2016-01-12 13:17                   ` Fam Zheng
2016-01-12 13:24                     ` Daniel P. Berrange
2016-01-13  0:08                       ` Fam Zheng
2016-01-12 15:59                 ` Denis V. Lunev
2016-01-13  0:10                   ` Fam Zheng
2016-01-13 16:44                     ` Eric Blake
2016-01-14  7:23                       ` Denis V. Lunev
2015-12-23  7:46       ` [Qemu-devel] [PATCH 2/5] block: implemented bdrv_lock_image for raw file Denis V. Lunev
2015-12-23 12:40         ` Daniel P. Berrange
2015-12-23  7:46       ` [Qemu-devel] [PATCH 3/5] block: added check image option and callback bdrv_is_opened_unclean Denis V. Lunev
2015-12-23  9:09         ` Fam Zheng
2015-12-23  9:14           ` Denis V. Lunev
2015-12-23  7:46       ` [Qemu-devel] [PATCH 4/5] qcow2: implemented bdrv_is_opened_unclean Denis V. Lunev
2016-01-11 17:37         ` Kevin Wolf
2015-12-23  7:46       ` [Qemu-devel] [PATCH 5/5] block/paralels: added paralles implementation for bdrv_is_opened_unclean Denis V. Lunev
2015-12-23  8:09       ` [Qemu-devel] [PATCH RFC 0/5] generic image locking and crash recovery Fam Zheng
2015-12-23  8:36         ` Denis V. Lunev
2015-12-23 10:47   ` [Qemu-devel] [PATCH 00/10] qcow2: Implement image locking Daniel P. Berrange
2015-12-23 12:15     ` [Qemu-devel] [Qemu-block] " Roman Kagan
2015-12-23 12:29       ` Daniel P. Berrange
2015-12-23 12:41         ` Denis V. Lunev
2015-12-23 12:46           ` Daniel P. Berrange
2015-12-23 12:34       ` Daniel P. Berrange
2015-12-23 12:47         ` Denis V. Lunev
2015-12-23 12:56           ` Daniel P. Berrange
2016-01-11 17:14     ` [Qemu-devel] " Kevin Wolf
2016-01-11 17:54       ` Daniel P. Berrange
2016-01-13  8:56       ` Markus Armbruster
2016-01-13  9:11         ` [Qemu-devel] [Qemu-block] " Denis V. Lunev
2015-12-23 23:19   ` [Qemu-devel] " Max Reitz
2015-12-24  5:41     ` [Qemu-devel] [Qemu-block] " Denis V. Lunev
2015-12-24  5:42       ` Denis V. Lunev
2016-01-04 17:02       ` Max Reitz
2016-01-11 16:47       ` Kevin Wolf
2016-01-11 17:56         ` Daniel P. Berrange
2015-12-23 14:57 ` [Qemu-devel] " Vasiliy Tolstov
2015-12-23 15:08   ` [Qemu-devel] [Qemu-block] " Denis V. Lunev
2015-12-23 15:11     ` Vasiliy Tolstov
2016-01-11 16:25       ` Kevin Wolf
2015-12-23 15:09   ` Denis V. Lunev
2015-12-24  5:43 ` Denis V. Lunev
2016-01-11 16:33   ` Kevin Wolf
2016-01-11 16:38     ` Denis V. Lunev
2016-01-14 14:01 ` Max Reitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450802786-20893-6-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).