qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: qemu-devel@nongnu.org, qemu-ppc@nongnu.org, agraf@suse.de,
	jsnow@redhat.com
Subject: [Qemu-devel] [PATCH 1/4] macio: use the existing IDEDMA aiocb to hold the active DMA aiocb
Date: Wed,  6 Jan 2016 20:37:23 +0000	[thread overview]
Message-ID: <1452112646-15969-2-git-send-email-mark.cave-ayland@ilande.co.uk> (raw)
In-Reply-To: <1452112646-15969-1-git-send-email-mark.cave-ayland@ilande.co.uk>

Currently the aiocb is held within MACIOIDEState, however the IDE core code
assumes that the current actvie DMA aiocb is held in aiocb in a few places,
e.g. ide_bus_reset() and ide_reset().

Switch over to using IDEDMA aiocb to store the aiocb for the current active
DMA request so that bus resets and restarts are handled correctly. As a
consequence we can now use ide_set_inactive() rather than handling its
functionality ourselves.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/ide/macio.c |   20 ++++++++++++--------
 hw/ppc/mac.h   |    1 -
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 3ee962f..560c071 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -119,8 +119,8 @@ static void pmac_dma_read(BlockBackend *blk,
     MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 "  "
                   "nsector: %x\n", (offset >> 9), (bytes >> 9));
 
-    m->aiocb = blk_aio_readv(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                             cb, io);
+    s->bus->dma->aiocb = blk_aio_readv(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_dma_write(BlockBackend *blk,
@@ -204,8 +204,8 @@ static void pmac_dma_write(BlockBackend *blk,
     MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 "  "
                   "nsector: %x\n", (offset >> 9), (bytes >> 9));
 
-    m->aiocb = blk_aio_writev(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                              cb, io);
+    s->bus->dma->aiocb = blk_aio_writev(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_dma_trim(BlockBackend *blk,
@@ -231,8 +231,8 @@ static void pmac_dma_trim(BlockBackend *blk,
     s->io_buffer_index += io->len;
     io->len = 0;
 
-    m->aiocb = ide_issue_trim(blk, (offset >> 9), &io->iov, (bytes >> 9),
-                              cb, io);
+    s->bus->dma->aiocb = ide_issue_trim(blk, (offset >> 9), &io->iov,
+                             (bytes >> 9), cb, io);
 }
 
 static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
@@ -291,6 +291,8 @@ done:
     } else {
         block_acct_done(blk_get_stats(s->blk), &s->acct);
     }
+
+    ide_set_inactive(s, false);
     io->dma_end(opaque);
 
     return;
@@ -307,7 +309,6 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
 
     if (ret < 0) {
         MACIO_DPRINTF("DMA error: %d\n", ret);
-        m->aiocb = NULL;
         ide_dma_error(s);
         goto done;
     }
@@ -358,6 +359,8 @@ done:
             block_acct_done(blk_get_stats(s->blk), &s->acct);
         }
     }
+
+    ide_set_inactive(s, false);
     io->dma_end(opaque);
 }
 
@@ -395,8 +398,9 @@ static void pmac_ide_transfer(DBDMA_io *io)
 static void pmac_ide_flush(DBDMA_io *io)
 {
     MACIOIDEState *m = io->opaque;
+    IDEState *s = idebus_active_if(&m->bus);
 
-    if (m->aiocb) {
+    if (s->bus->dma->aiocb) {
         blk_drain_all();
     }
 }
diff --git a/hw/ppc/mac.h b/hw/ppc/mac.h
index e375ed2..ecf7792 100644
--- a/hw/ppc/mac.h
+++ b/hw/ppc/mac.h
@@ -134,7 +134,6 @@ typedef struct MACIOIDEState {
 
     MemoryRegion mem;
     IDEBus bus;
-    BlockAIOCB *aiocb;
     IDEDMA dma;
     void *dbdma;
     bool dma_active;
-- 
1.7.10.4

  reply	other threads:[~2016-01-06 20:38 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-06 20:37 [Qemu-devel] [PATCH 0/4] ppc: loadvm/savevm fixups for macio/DBDMA Mark Cave-Ayland
2016-01-06 20:37 ` Mark Cave-Ayland [this message]
2016-01-06 21:09   ` [Qemu-devel] [PATCH 1/4] macio: use the existing IDEDMA aiocb to hold the active DMA aiocb John Snow
2016-01-06 20:37 ` [Qemu-devel] [PATCH 2/4] macio: add dma_active to VMStateDescription Mark Cave-Ayland
2016-01-06 20:57   ` John Snow
2016-01-06 21:17     ` Mark Cave-Ayland
2016-01-08 20:55       ` John Snow
2016-01-11 23:41         ` Mark Cave-Ayland
2016-01-14 16:51           ` John Snow
2016-01-14 20:18             ` Mark Cave-Ayland
2016-01-06 20:37 ` [Qemu-devel] [PATCH 3/4] mac_dbdma: add DBDMA controller state " Mark Cave-Ayland
2016-01-06 20:37 ` [Qemu-devel] [PATCH 4/4] cuda: add missing fields " Mark Cave-Ayland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452112646-15969-2-git-send-email-mark.cave-ayland@ilande.co.uk \
    --to=mark.cave-ayland@ilande.co.uk \
    --cc=agraf@suse.de \
    --cc=jsnow@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).