From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Richard Henderson <rth@twiddle.net>,
Paolo Bonzini <pbonzini@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>,
Igor Mammedov <imammedo@redhat.com>
Subject: [Qemu-devel] [PULL v2 17/59] pc: acpi: memhp: drop not needed stringify(MEMORY_foo) usage
Date: Sat, 9 Jan 2016 23:40:07 +0200 [thread overview]
Message-ID: <1452375528-16627-18-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1452375528-16627-1-git-send-email-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
most of MEMORY_foo defines are not shared
with ASL anymore and are used only inside of
memory_hotplug_acpi_table.c, so move them
there and make them strings. As result we
can replace stringify(MEMORY_foo) with just
MEMORY_foo, which makes code a bit cleaner.
No AML change introduced by this patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/acpi/memory_hotplug.h | 6 ++---
include/hw/acpi/pc-hotplug.h | 42 ++++++++++++++---------------
hw/acpi/memory_hotplug_acpi_table.c | 53 +++++++++++++++++--------------------
hw/i386/acpi-build.c | 52 ++++++++++++++++++------------------
4 files changed, 74 insertions(+), 79 deletions(-)
diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index de164f2..3a646b1 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -47,10 +47,10 @@ extern const VMStateDescription vmstate_memory_hotplug;
void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
-#define MEMORY_HOTPLUG_DEVICE MHPD
-#define MEMORY_SLOT_SCAN_METHOD MSCN
+#define MEMORY_HOTPLUG_DEVICE "MHPD"
+#define MEMORY_SLOT_SCAN_METHOD "MSCN"
#define MEMORY_HOTPLUG_HANDLER_PATH "\\_SB.PCI0." \
- stringify(MEMORY_HOTPLUG_DEVICE) "." stringify(MEMORY_SLOT_SCAN_METHOD)
+ MEMORY_HOTPLUG_DEVICE "." MEMORY_SLOT_SCAN_METHOD
void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
uint16_t io_base, uint16_t io_len);
diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h
index e5bb321..6a8d268 100644
--- a/include/hw/acpi/pc-hotplug.h
+++ b/include/hw/acpi/pc-hotplug.h
@@ -32,26 +32,26 @@
#define ACPI_MEMORY_HOTPLUG_IO_LEN 24
#define ACPI_MEMORY_HOTPLUG_BASE 0x0a00
-#define MEMORY_SLOTS_NUMBER MDNR
-#define MEMORY_HOTPLUG_IO_REGION HPMR
-#define MEMORY_SLOT_ADDR_LOW MRBL
-#define MEMORY_SLOT_ADDR_HIGH MRBH
-#define MEMORY_SLOT_SIZE_LOW MRLL
-#define MEMORY_SLOT_SIZE_HIGH MRLH
-#define MEMORY_SLOT_PROXIMITY MPX
-#define MEMORY_SLOT_ENABLED MES
-#define MEMORY_SLOT_INSERT_EVENT MINS
-#define MEMORY_SLOT_REMOVE_EVENT MRMV
-#define MEMORY_SLOT_EJECT MEJ
-#define MEMORY_SLOT_SLECTOR MSEL
-#define MEMORY_SLOT_OST_EVENT MOEV
-#define MEMORY_SLOT_OST_STATUS MOSC
-#define MEMORY_SLOT_LOCK MLCK
-#define MEMORY_SLOT_STATUS_METHOD MRST
-#define MEMORY_SLOT_CRS_METHOD MCRS
-#define MEMORY_SLOT_OST_METHOD MOST
-#define MEMORY_SLOT_PROXIMITY_METHOD MPXM
-#define MEMORY_SLOT_EJECT_METHOD MEJ0
-#define MEMORY_SLOT_NOTIFY_METHOD MTFY
+#define MEMORY_SLOTS_NUMBER "MDNR"
+#define MEMORY_HOTPLUG_IO_REGION "HPMR"
+#define MEMORY_SLOT_ADDR_LOW "MRBL"
+#define MEMORY_SLOT_ADDR_HIGH "MRBH"
+#define MEMORY_SLOT_SIZE_LOW "MRLL"
+#define MEMORY_SLOT_SIZE_HIGH "MRLH"
+#define MEMORY_SLOT_PROXIMITY "MPX"
+#define MEMORY_SLOT_ENABLED "MES"
+#define MEMORY_SLOT_INSERT_EVENT "MINS"
+#define MEMORY_SLOT_REMOVE_EVENT "MRMV"
+#define MEMORY_SLOT_EJECT "MEJ"
+#define MEMORY_SLOT_SLECTOR "MSEL"
+#define MEMORY_SLOT_OST_EVENT "MOEV"
+#define MEMORY_SLOT_OST_STATUS "MOSC"
+#define MEMORY_SLOT_LOCK "MLCK"
+#define MEMORY_SLOT_STATUS_METHOD "MRST"
+#define MEMORY_SLOT_CRS_METHOD "MCRS"
+#define MEMORY_SLOT_OST_METHOD "MOST"
+#define MEMORY_SLOT_PROXIMITY_METHOD "MPXM"
+#define MEMORY_SLOT_EJECT_METHOD "MEJ0"
+#define MEMORY_SLOT_NOTIFY_METHOD "MTFY"
#endif
diff --git a/hw/acpi/memory_hotplug_acpi_table.c b/hw/acpi/memory_hotplug_acpi_table.c
index b5b79e6..080d9ad 100644
--- a/hw/acpi/memory_hotplug_acpi_table.c
+++ b/hw/acpi/memory_hotplug_acpi_table.c
@@ -24,15 +24,15 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
/* scope for memory hotplug controller device node */
pci_scope = aml_scope("_SB.PCI0");
- mem_ctrl_dev = aml_device(stringify(MEMORY_HOTPLUG_DEVICE));
+ mem_ctrl_dev = aml_device(MEMORY_HOTPLUG_DEVICE);
{
Aml *one = aml_int(1);
Aml *zero = aml_int(0);
Aml *ret_val = aml_local(0);
Aml *slot_arg0 = aml_arg(0);
- Aml *slots_nr = aml_name(stringify(MEMORY_SLOTS_NUMBER));
- Aml *ctrl_lock = aml_name(stringify(MEMORY_SLOT_LOCK));
- Aml *slot_selector = aml_name(stringify(MEMORY_SLOT_SLECTOR));
+ Aml *slots_nr = aml_name(MEMORY_SLOTS_NUMBER);
+ Aml *ctrl_lock = aml_name(MEMORY_SLOT_LOCK);
+ Aml *slot_selector = aml_name(MEMORY_SLOT_SLECTOR);
aml_append(mem_ctrl_dev, aml_name_decl("_HID", aml_string("PNP0A06")));
aml_append(mem_ctrl_dev,
@@ -48,10 +48,9 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
aml_append(method, aml_return(aml_int(0xB)));
aml_append(mem_ctrl_dev, method);
- aml_append(mem_ctrl_dev, aml_mutex(stringify(MEMORY_SLOT_LOCK), 0));
+ aml_append(mem_ctrl_dev, aml_mutex(MEMORY_SLOT_LOCK, 0));
- method = aml_method(stringify(MEMORY_SLOT_SCAN_METHOD), 0,
- AML_NOTSERIALIZED);
+ method = aml_method(MEMORY_SLOT_SCAN_METHOD, 0, AML_NOTSERIALIZED);
{
Aml *else_ctx;
Aml *while_ctx;
@@ -75,14 +74,14 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
*/
while_ctx = aml_while(aml_lless(idx, slots_nr));
{
- Aml *ins_evt = aml_name(stringify(MEMORY_SLOT_INSERT_EVENT));
- Aml *rm_evt = aml_name(stringify(MEMORY_SLOT_REMOVE_EVENT));
+ Aml *ins_evt = aml_name(MEMORY_SLOT_INSERT_EVENT);
+ Aml *rm_evt = aml_name(MEMORY_SLOT_REMOVE_EVENT);
aml_append(while_ctx, aml_store(idx, slot_selector));
ifctx = aml_if(aml_equal(ins_evt, one));
{
aml_append(ifctx,
- aml_call2(stringify(MEMORY_SLOT_NOTIFY_METHOD),
+ aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
idx, dev_chk));
aml_append(ifctx, aml_store(one, ins_evt));
}
@@ -92,7 +91,7 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
ifctx = aml_if(aml_equal(rm_evt, one));
{
aml_append(ifctx,
- aml_call2(stringify(MEMORY_SLOT_NOTIFY_METHOD),
+ aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
idx, eject_req));
aml_append(ifctx, aml_store(one, rm_evt));
}
@@ -107,10 +106,9 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
}
aml_append(mem_ctrl_dev, method);
- method = aml_method(stringify(MEMORY_SLOT_STATUS_METHOD), 1,
- AML_NOTSERIALIZED);
+ method = aml_method(MEMORY_SLOT_STATUS_METHOD, 1, AML_NOTSERIALIZED);
{
- Aml *slot_enabled = aml_name(stringify(MEMORY_SLOT_ENABLED));
+ Aml *slot_enabled = aml_name(MEMORY_SLOT_ENABLED);
aml_append(method, aml_store(zero, ret_val));
aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
@@ -128,8 +126,7 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
}
aml_append(mem_ctrl_dev, method);
- method = aml_method(stringify(MEMORY_SLOT_CRS_METHOD), 1,
- AML_SERIALIZED);
+ method = aml_method(MEMORY_SLOT_CRS_METHOD, 1, AML_SERIALIZED);
{
Aml *mr64 = aml_name("MR64");
Aml *mr32 = aml_name("MR32");
@@ -165,13 +162,13 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
aml_create_dword_field(mr64, aml_int(26), "MAXH"));
aml_append(method,
- aml_store(aml_name(stringify(MEMORY_SLOT_ADDR_HIGH)), minh));
+ aml_store(aml_name(MEMORY_SLOT_ADDR_HIGH), minh));
aml_append(method,
- aml_store(aml_name(stringify(MEMORY_SLOT_ADDR_LOW)), minl));
+ aml_store(aml_name(MEMORY_SLOT_ADDR_LOW), minl));
aml_append(method,
- aml_store(aml_name(stringify(MEMORY_SLOT_SIZE_HIGH)), lenh));
+ aml_store(aml_name(MEMORY_SLOT_SIZE_HIGH), lenh));
aml_append(method,
- aml_store(aml_name(stringify(MEMORY_SLOT_SIZE_LOW)), lenl));
+ aml_store(aml_name(MEMORY_SLOT_SIZE_LOW), lenl));
/* 64-bit math: MAX = MIN + LEN - 1 */
aml_append(method, aml_add(minl, lenl, maxl));
@@ -220,10 +217,10 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
}
aml_append(mem_ctrl_dev, method);
- method = aml_method(stringify(MEMORY_SLOT_PROXIMITY_METHOD), 1,
+ method = aml_method(MEMORY_SLOT_PROXIMITY_METHOD, 1,
AML_NOTSERIALIZED);
{
- Aml *proximity = aml_name(stringify(MEMORY_SLOT_PROXIMITY));
+ Aml *proximity = aml_name(MEMORY_SLOT_PROXIMITY);
aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
aml_append(method, aml_store(aml_to_integer(slot_arg0),
@@ -234,11 +231,10 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
}
aml_append(mem_ctrl_dev, method);
- method = aml_method(stringify(MEMORY_SLOT_OST_METHOD), 4,
- AML_NOTSERIALIZED);
+ method = aml_method(MEMORY_SLOT_OST_METHOD, 4, AML_NOTSERIALIZED);
{
- Aml *ost_evt = aml_name(stringify(MEMORY_SLOT_OST_EVENT));
- Aml *ost_status = aml_name(stringify(MEMORY_SLOT_OST_STATUS));
+ Aml *ost_evt = aml_name(MEMORY_SLOT_OST_EVENT);
+ Aml *ost_status = aml_name(MEMORY_SLOT_OST_STATUS);
aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
aml_append(method, aml_store(aml_to_integer(slot_arg0),
@@ -249,10 +245,9 @@ void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
}
aml_append(mem_ctrl_dev, method);
- method = aml_method(stringify(MEMORY_SLOT_EJECT_METHOD), 2,
- AML_NOTSERIALIZED);
+ method = aml_method(MEMORY_SLOT_EJECT_METHOD, 2, AML_NOTSERIALIZED);
{
- Aml *eject = aml_name(stringify(MEMORY_SLOT_EJECT));
+ Aml *eject = aml_name(MEMORY_SLOT_EJECT);
aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
aml_append(method, aml_store(aml_to_integer(slot_arg0),
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 3c2b889..42e60c1 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -944,9 +944,9 @@ static void build_memory_devices(Aml *sb_scope, int nr_mem,
/* build memory devices */
assert(nr_mem <= ACPI_MAX_RAM_SLOTS);
- scope = aml_scope("\\_SB.PCI0." stringify(MEMORY_HOTPLUG_DEVICE));
+ scope = aml_scope("\\_SB.PCI0." MEMORY_HOTPLUG_DEVICE);
aml_append(scope,
- aml_name_decl(stringify(MEMORY_SLOTS_NUMBER), aml_int(nr_mem))
+ aml_name_decl(MEMORY_SLOTS_NUMBER, aml_int(nr_mem))
);
crs = aml_resource_template();
@@ -956,53 +956,53 @@ static void build_memory_devices(Aml *sb_scope, int nr_mem,
aml_append(scope, aml_name_decl("_CRS", crs));
aml_append(scope, aml_operation_region(
- stringify(MEMORY_HOTPLUG_IO_REGION), AML_SYSTEM_IO,
+ MEMORY_HOTPLUG_IO_REGION, AML_SYSTEM_IO,
io_base, io_len)
);
- field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), AML_DWORD_ACC,
+ field = aml_field(MEMORY_HOTPLUG_IO_REGION, AML_DWORD_ACC,
AML_NOLOCK, AML_PRESERVE);
aml_append(field, /* read only */
- aml_named_field(stringify(MEMORY_SLOT_ADDR_LOW), 32));
+ aml_named_field(MEMORY_SLOT_ADDR_LOW, 32));
aml_append(field, /* read only */
- aml_named_field(stringify(MEMORY_SLOT_ADDR_HIGH), 32));
+ aml_named_field(MEMORY_SLOT_ADDR_HIGH, 32));
aml_append(field, /* read only */
- aml_named_field(stringify(MEMORY_SLOT_SIZE_LOW), 32));
+ aml_named_field(MEMORY_SLOT_SIZE_LOW, 32));
aml_append(field, /* read only */
- aml_named_field(stringify(MEMORY_SLOT_SIZE_HIGH), 32));
+ aml_named_field(MEMORY_SLOT_SIZE_HIGH, 32));
aml_append(field, /* read only */
- aml_named_field(stringify(MEMORY_SLOT_PROXIMITY), 32));
+ aml_named_field(MEMORY_SLOT_PROXIMITY, 32));
aml_append(scope, field);
- field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), AML_BYTE_ACC,
+ field = aml_field(MEMORY_HOTPLUG_IO_REGION, AML_BYTE_ACC,
AML_NOLOCK, AML_WRITE_AS_ZEROS);
aml_append(field, aml_reserved_field(160 /* bits, Offset(20) */));
aml_append(field, /* 1 if enabled, read only */
- aml_named_field(stringify(MEMORY_SLOT_ENABLED), 1));
+ aml_named_field(MEMORY_SLOT_ENABLED, 1));
aml_append(field,
/*(read) 1 if has a insert event. (write) 1 to clear event */
- aml_named_field(stringify(MEMORY_SLOT_INSERT_EVENT), 1));
+ aml_named_field(MEMORY_SLOT_INSERT_EVENT, 1));
aml_append(field,
/* (read) 1 if has a remove event. (write) 1 to clear event */
- aml_named_field(stringify(MEMORY_SLOT_REMOVE_EVENT), 1));
+ aml_named_field(MEMORY_SLOT_REMOVE_EVENT, 1));
aml_append(field,
/* initiates device eject, write only */
- aml_named_field(stringify(MEMORY_SLOT_EJECT), 1));
+ aml_named_field(MEMORY_SLOT_EJECT, 1));
aml_append(scope, field);
- field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), AML_DWORD_ACC,
+ field = aml_field(MEMORY_HOTPLUG_IO_REGION, AML_DWORD_ACC,
AML_NOLOCK, AML_PRESERVE);
aml_append(field, /* DIMM selector, write only */
- aml_named_field(stringify(MEMORY_SLOT_SLECTOR), 32));
+ aml_named_field(MEMORY_SLOT_SLECTOR, 32));
aml_append(field, /* _OST event code, write only */
- aml_named_field(stringify(MEMORY_SLOT_OST_EVENT), 32));
+ aml_named_field(MEMORY_SLOT_OST_EVENT, 32));
aml_append(field, /* _OST status code, write only */
- aml_named_field(stringify(MEMORY_SLOT_OST_STATUS), 32));
+ aml_named_field(MEMORY_SLOT_OST_STATUS, 32));
aml_append(scope, field);
aml_append(sb_scope, scope);
for (i = 0; i < nr_mem; i++) {
- #define BASEPATH "\\_SB.PCI0." stringify(MEMORY_HOTPLUG_DEVICE) "."
+ #define BASEPATH "\\_SB.PCI0." MEMORY_HOTPLUG_DEVICE "."
const char *s;
dev = aml_device("MP%02X", i);
@@ -1010,29 +1010,30 @@ static void build_memory_devices(Aml *sb_scope, int nr_mem,
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C80")));
method = aml_method("_CRS", 0, AML_NOTSERIALIZED);
- s = BASEPATH stringify(MEMORY_SLOT_CRS_METHOD);
+ s = BASEPATH MEMORY_SLOT_CRS_METHOD;
aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
aml_append(dev, method);
method = aml_method("_STA", 0, AML_NOTSERIALIZED);
- s = BASEPATH stringify(MEMORY_SLOT_STATUS_METHOD);
+ s = BASEPATH MEMORY_SLOT_STATUS_METHOD;
aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
aml_append(dev, method);
method = aml_method("_PXM", 0, AML_NOTSERIALIZED);
- s = BASEPATH stringify(MEMORY_SLOT_PROXIMITY_METHOD);
+ s = BASEPATH MEMORY_SLOT_PROXIMITY_METHOD;
aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
aml_append(dev, method);
method = aml_method("_OST", 3, AML_NOTSERIALIZED);
- s = BASEPATH stringify(MEMORY_SLOT_OST_METHOD);
+ s = BASEPATH MEMORY_SLOT_OST_METHOD;
+
aml_append(method, aml_return(aml_call4(
s, aml_name("_UID"), aml_arg(0), aml_arg(1), aml_arg(2)
)));
aml_append(dev, method);
method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
- s = BASEPATH stringify(MEMORY_SLOT_EJECT_METHOD);
+ s = BASEPATH MEMORY_SLOT_EJECT_METHOD;
aml_append(method, aml_return(aml_call2(
s, aml_name("_UID"), aml_arg(0))));
aml_append(dev, method);
@@ -1043,8 +1044,7 @@ static void build_memory_devices(Aml *sb_scope, int nr_mem,
/* build Method(MEMORY_SLOT_NOTIFY_METHOD, 2) {
* If (LEqual(Arg0, 0x00)) {Notify(MP00, Arg1)} ... }
*/
- method = aml_method(stringify(MEMORY_SLOT_NOTIFY_METHOD), 2,
- AML_NOTSERIALIZED);
+ method = aml_method(MEMORY_SLOT_NOTIFY_METHOD, 2, AML_NOTSERIALIZED);
for (i = 0; i < nr_mem; i++) {
ifctx = aml_if(aml_equal(aml_arg(0), aml_int(i)));
aml_append(ifctx,
--
MST
next prev parent reply other threads:[~2016-01-09 21:40 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-09 21:39 [Qemu-devel] [PULL v2 00/59] acpi dsdt rework, misc fixes Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 01/59] nvdimm: fix header pointer in nvdimm_build_nfit() Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 02/59] igd-passthrough: fix use of host_pci_config_read Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 03/59] hw/i386: fill in the CENTURY field of the FADT (FACP) ACPI table Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 04/59] tests: acpi: print ASL diff in verbose mode Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 05/59] pc: acpi: memhp: prepare context in SSDT for moving memhp DSDT code Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 06/59] pc: acpi: memhp: move MHPD._STA method into SSDT Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 07/59] pc: acpi: memhp: move MHPD.MLCK mutex " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 08/59] pc: acpi: memhp: move MHPD.MSCN method " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 09/59] pc: acpi: memhp: move MHPD.MRST " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 10/59] pc: acpi: memhp: move MHPD.MPXM " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 11/59] pc: acpi: memhp: move MHPD.MOST " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 12/59] pc: acpi: memhp: move MHPD.MEJ0 " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 13/59] pc: acpi: memhp: move MHPD.MCRS " Michael S. Tsirkin
2016-01-09 21:39 ` [Qemu-devel] [PULL v2 14/59] pc: acpi: memhp: move MHPD Device " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 15/59] pc: acpi: factor out memhp code from build_ssdt() into separate function Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 16/59] pc: acpi: memhp: move \_GPE._E03 into SSDT Michael S. Tsirkin
2016-01-09 21:40 ` Michael S. Tsirkin [this message]
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 18/59] pc: acpi: drop unused CPU_STATUS_LEN from DSDT Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 19/59] pc: acpi: cpuhp: move CPEJ() method to SSDT Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 20/59] pc: acpi: cpuhp: move CPMA() method into SSDT Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 21/59] pc: acpi: cpuhp: move CPST() " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 22/59] pc: acpi: cpuhp: move PRSC() " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 23/59] pc: acpi: cpuhp: move \_GPE._E02() " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 24/59] pc: acpi: factor out cpu hotplug code from build_ssdt() into separate function Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 25/59] pc: acpi: move HPET from DSDT to SSDT Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 26/59] pc: acpi: move DBUG() " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 27/59] pc: acpi: move RTC device " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 28/59] pc: acpi: move KBD " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 29/59] pc: acpi: move MOU " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 30/59] pc: acpi: move FDC0 " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 31/59] pc: acpi: move LPT " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 32/59] pc: acpi: move COM devices " Michael S. Tsirkin
2016-01-09 21:40 ` [Qemu-devel] [PULL v2 33/59] pc: acpi: move PIIX4 isa-bridge and pm devices into SSDT Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 34/59] pc: acpi: move remaining GPE handlers " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 35/59] pc: acpi: pci: move link devices " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 36/59] pc: acpi: piix4: move IQCR() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 37/59] pc: acpi: piix4: move IQST() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 38/59] pc: acpi: piix4: move PCI0._PRT() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 39/59] pc: acpi: piix4: move remaining PCI hotplug bits " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 40/59] pc: acpi: piix4: acpi move PCI0 device to SSDT Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 41/59] pc: acpi: q35: move GSI links " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 42/59] pc: acpi: q35: move link devices " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 43/59] pc: acpi: q35: move IQCR() into SSDT Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 44/59] pc: acpi: q35: move IQST() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 45/59] pc: acpi: q35: move ISA bridge " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 46/59] pc: acpi: q35: move _PRT() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 47/59] pc: acpi: q35: move PRTA routing table " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 48/59] pc: acpi: q35: move PRTP " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 49/59] pc: acpi: q35: move _PIC() method " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 50/59] pc: acpi: q35: move PCI0._OSC() " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 51/59] pc: acpi: q35: move PCI0 device definition " Michael S. Tsirkin
2016-01-09 21:41 ` [Qemu-devel] [PULL v2 52/59] pc: acpi: q35: PCST, PCSB opregions and PCIB field " Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 53/59] pc: acpi: switch to AML API composed DSDT Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 54/59] pc: acpi: remove unused ASL templates and related blobs/utils Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 55/59] i386/pc: expose identifying the floppy controller Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 56/59] Add VMSTATE_STRUCT_VARRAY_KNOWN Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 57/59] migration/virtio: Remove simple .get/.put use Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 58/59] ivshmem: Store file descriptor for vhost-user negotiation Michael S. Tsirkin
2016-01-09 21:42 ` [Qemu-devel] [PULL v2 59/59] virtio: fix error message for number of queues Michael S. Tsirkin
2016-01-11 11:54 ` [Qemu-devel] [PULL v2 00/59] acpi dsdt rework, misc fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452375528-16627-18-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).