From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org
Subject: [Qemu-devel] [PATCH v1 15/15] block: remove support for legecy AES qcow/qcow2 encryption
Date: Tue, 12 Jan 2016 18:56:22 +0000 [thread overview]
Message-ID: <1452624982-19332-16-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1452624982-19332-1-git-send-email-berrange@redhat.com>
Refuse to use images with the legacy AES-CBC encryption
format in the system emulators. They are still fully
supported in the qemu-img, qemu-io & qemu-nbd tools in
order to allow data to be liberated and for compatibility
with older QEMU versions. Continued support in these tools
is not a notable burden with the new FDE framework.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
block.c | 12 +++++-------
block/qcow.c | 8 ++++++++
block/qcow2.c | 8 ++++++++
include/block/block.h | 1 +
tests/qemu-iotests/087.out | 18 ------------------
tests/qemu-iotests/134.out | 18 ------------------
6 files changed, 22 insertions(+), 43 deletions(-)
diff --git a/block.c b/block.c
index d123cbc..ebf2fec 100644
--- a/block.c
+++ b/block.c
@@ -312,6 +312,11 @@ static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
return 0;
}
+bool bdrv_uses_whitelist(void)
+{
+ return use_bdrv_whitelist;
+}
+
typedef struct CreateCo {
BlockDriver *drv;
char *filename;
@@ -1020,13 +1025,6 @@ static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
goto free_and_fail;
}
- if (bs->encrypted) {
- error_report("Encrypted images are deprecated");
- error_printf("Support for them will be removed in a future release.\n"
- "You can use 'qemu-img convert' to convert your image"
- " to an unencrypted one.\n");
- }
-
ret = refresh_total_sectors(bs, bs->total_sectors);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not refresh total sector count");
diff --git a/block/qcow.c b/block/qcow.c
index a17531f..cda187a 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -180,6 +180,14 @@ static int qcow_open(BlockDriverState *bs, QDict *options, int flags,
s->crypt_method_header = header.crypt_method;
if (s->crypt_method_header) {
if (s->crypt_method_header == QCOW_CRYPT_AES) {
+ if (bdrv_uses_whitelist()) {
+ error_setg(errp,
+ "Use of AES-CBC encrypted qcow images is no longer "
+ "supported. Please use the qcow2 LUKS format instead.");
+ ret = -ENOSYS;
+ goto fail;
+ }
+
ov = opts_visitor_new(opts);
fde_opts = g_new0(QCryptoBlockOpenOptions, 1);
diff --git a/block/qcow2.c b/block/qcow2.c
index 288aada..f0efc0f 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1221,6 +1221,14 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,
s->crypt_method_header = header.crypt_method;
if (s->crypt_method_header) {
+ if (bdrv_uses_whitelist() &&
+ s->crypt_method_header == QCOW_CRYPT_AES) {
+ error_setg(errp,
+ "Use of AES-CBC encrypted qcow2 images is no longer "
+ "supported. Please use the qcow2 LUKS format instead.");
+ ret = -ENOSYS;
+ goto fail;
+ }
bs->encrypted = 1;
}
diff --git a/include/block/block.h b/include/block/block.h
index 379a24c..58006d2 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -190,6 +190,7 @@ void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group);
void bdrv_init(void);
void bdrv_init_with_whitelist(void);
+bool bdrv_uses_whitelist(void);
BlockDriver *bdrv_find_protocol(const char *filename,
bool allow_protocol_prefix,
Error **errp);
diff --git a/tests/qemu-iotests/087.out b/tests/qemu-iotests/087.out
index 2b55b1b..19a54c5 100644
--- a/tests/qemu-iotests/087.out
+++ b/tests/qemu-iotests/087.out
@@ -38,20 +38,11 @@ QMP_VERSION
=== Encrypted image ===
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
Testing: -S
QMP_VERSION
{"return": {}}
{"return": {}}
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN"}
@@ -60,9 +51,6 @@ Testing:
QMP_VERSION
{"return": {}}
{"return": {}}
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN"}
@@ -70,12 +58,6 @@ You can use 'qemu-img convert' to convert your image to an unencrypted one.
=== Missing driver ===
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
Testing: -S
QMP_VERSION
diff --git a/tests/qemu-iotests/134.out b/tests/qemu-iotests/134.out
index 845aa57..a01067d 100644
--- a/tests/qemu-iotests/134.out
+++ b/tests/qemu-iotests/134.out
@@ -1,37 +1,19 @@
QA output created by 134
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
-qemu-img: Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on
== reading whole image ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
read 134217728/134217728 bytes at offset 0
128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== rewriting whole image ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
wrote 134217728/134217728 bytes at offset 0
128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== verify pattern ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
read 134217728/134217728 bytes at offset 0
128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== verify pattern failure with wrong password ==
-Encrypted images are deprecated
-Support for them will be removed in a future release.
-You can use 'qemu-img convert' to convert your image to an unencrypted one.
Pattern verification failed at offset 0, 134217728 bytes
read 134217728/134217728 bytes at offset 0
128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
--
2.5.0
prev parent reply other threads:[~2016-01-12 18:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 18:56 [Qemu-devel] [PATCH v1 00/15] Support LUKS encryption in block devices Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 01/15] crypto: add cryptographic random byte source Daniel P. Berrange
2016-01-13 2:46 ` Fam Zheng
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 02/15] crypto: add support for PBKDF2 algorithm Daniel P. Berrange
2016-01-13 5:53 ` Fam Zheng
2016-01-14 12:17 ` Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 03/15] crypto: add support for generating initialization vectors Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 04/15] crypto: add support for anti-forensic split algorithm Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 05/15] crypto: add block encryption framework Daniel P. Berrange
2016-01-13 23:40 ` Eric Blake
2016-01-14 12:16 ` Daniel P. Berrange
2016-01-18 19:48 ` Eric Blake
2016-01-19 9:41 ` Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 06/15] crypto: implement the LUKS block encryption format Daniel P. Berrange
2016-01-13 23:43 ` Eric Blake
2016-01-14 10:14 ` Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 07/15] block: add flag to indicate that no I/O will be performed Daniel P. Berrange
2016-01-13 17:44 ` [Qemu-devel] [Qemu-block] " Kevin Wolf
2016-01-13 17:56 ` Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 08/15] block: add generic full disk encryption driver Daniel P. Berrange
2016-01-13 23:47 ` Eric Blake
2016-01-14 10:15 ` Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 09/15] qcow2: make qcow2_encrypt_sectors encrypt in place Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 10/15] qcow2: convert QCow2 to use QCryptoBlock for encryption Daniel P. Berrange
2016-01-13 18:42 ` [Qemu-devel] [Qemu-block] " Kevin Wolf
2016-01-14 12:14 ` Daniel P. Berrange
2016-01-14 12:58 ` Kevin Wolf
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 11/15] qcow: make encrypt_sectors encrypt in place Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 12/15] qcow: convert QCow to use QCryptoBlock for encryption Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 13/15] block: rip out all traces of password prompting Daniel P. Berrange
2016-01-12 18:56 ` [Qemu-devel] [PATCH v1 14/15] block: remove all encryption handling APIs Daniel P. Berrange
2016-01-12 18:56 ` Daniel P. Berrange [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452624982-19332-16-git-send-email-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).