[Qemu-devel] [PULL 04/41] hw: Don't use hw_error() for machine initialization errors

[Markus Armbruster <armbru@redhat.com>]

Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either.  Replace
hw_error() by error_report(); exit(1).  Matches how we report these
errors in other machine initializations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
 hw/alpha/dp264.c          | 11 ++++++-----
 hw/arm/highbank.c         |  6 ++++--
 hw/char/exynos4210_uart.c |  9 ++++++---
 hw/m68k/an5206.c          |  4 +++-
 hw/ppc/mac_newworld.c     | 11 ++++++-----
 hw/ppc/mac_oldworld.c     | 16 +++++++++-------
 hw/ppc/prep.c             | 11 +++++++----
 hw/unicore32/puv3.c       | 10 +++++++---
 8 files changed, 48 insertions(+), 30 deletions(-)

diff --git a/hw/alpha/dp264.c b/hw/alpha/dp264.c
index 27bdaa1..38b85ba 100644
--- a/hw/alpha/dp264.c
+++ b/hw/alpha/dp264.c
@@ -11,6 +11,7 @@
 #include "hw/loader.h"
 #include "hw/boards.h"
 #include "alpha_sys.h"
+#include "qemu/error-report.h"
 #include "sysemu/sysemu.h"
 #include "hw/timer/mc146818rtc.h"
 #include "hw/ide.h"
@@ -104,14 +105,14 @@ static void clipper_init(MachineState *machine)
     palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
                                 bios_name ? bios_name : "palcode-clipper");
     if (palcode_filename == NULL) {
-        hw_error("no palcode provided\n");
+        error_report("no palcode provided");
         exit(1);
     }
     size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
                     NULL, &palcode_entry, &palcode_low, &palcode_high,
                     0, EM_ALPHA, 0);
     if (size < 0) {
-        hw_error("could not load palcode '%s'\n", palcode_filename);
+        error_report("could not load palcode '%s'", palcode_filename);
         exit(1);
     }
     g_free(palcode_filename);
@@ -131,7 +132,7 @@ static void clipper_init(MachineState *machine)
                         NULL, &kernel_entry, &kernel_low, &kernel_high,
                         0, EM_ALPHA, 0);
         if (size < 0) {
-            hw_error("could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
 
@@ -148,8 +149,8 @@ static void clipper_init(MachineState *machine)
 
             initrd_size = get_image_size(initrd_filename);
             if (initrd_size < 0) {
-                hw_error("could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
 
diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index a0a5a06..cb9926e 100644
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -315,11 +315,13 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
         sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         if (sysboot_filename != NULL) {
             if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
-                hw_error("Unable to load %s\n", bios_name);
+                error_report("Unable to load %s", bios_name);
+                exit(1);
             }
             g_free(sysboot_filename);
         } else {
-           hw_error("Unable to find %s\n", bios_name);
+            error_report("Unable to find %s", bios_name);
+            exit(1);
         }
     }
 
diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c
index 215f962..2736b37 100644
--- a/hw/char/exynos4210_uart.c
+++ b/hw/char/exynos4210_uart.c
@@ -20,6 +20,7 @@
  */
 
 #include "hw/sysbus.h"
+#include "qemu/error-report.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/char.h"
 
@@ -595,15 +596,17 @@ DeviceState *exynos4210_uart_create(hwaddr addr,
 
     if (!chr) {
         if (channel >= MAX_SERIAL_PORTS) {
-            hw_error("Only %d serial ports are supported by QEMU.\n",
-                     MAX_SERIAL_PORTS);
+            error_report("Only %d serial ports are supported by QEMU",
+                         MAX_SERIAL_PORTS);
+            exit(1);
         }
         chr = serial_hds[channel];
         if (!chr) {
             snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
             chr = qemu_chr_new(label, "null", NULL);
             if (!(chr)) {
-                hw_error("Can't assign serial port to UART%d.\n", channel);
+                error_report("Can't assign serial port to UART%d", channel);
+                exit(1);
             }
         }
     }
diff --git a/hw/m68k/an5206.c b/hw/m68k/an5206.c
index c1dea17..8d9ccaa 100644
--- a/hw/m68k/an5206.c
+++ b/hw/m68k/an5206.c
@@ -12,6 +12,7 @@
 #include "hw/loader.h"
 #include "elf.h"
 #include "exec/address-spaces.h"
+#include "qemu/error-report.h"
 #include "sysemu/qtest.h"
 
 #define KERNEL_LOAD_ADDR 0x10000
@@ -39,7 +40,8 @@ static void an5206_init(MachineState *machine)
     }
     cpu = cpu_m68k_init(cpu_model);
     if (!cpu) {
-        hw_error("Unable to find m68k CPU definition\n");
+        error_report("Unable to find m68k CPU definition");
+        exit(1);
     }
     env = &cpu->env;
 
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 1b9a573..ca3d6a8 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -62,6 +62,7 @@
 #include "hw/ide.h"
 #include "hw/loader.h"
 #include "elf.h"
+#include "qemu/error-report.h"
 #include "sysemu/kvm.h"
 #include "kvm_ppc.h"
 #include "hw/usb.h"
@@ -226,7 +227,7 @@ static void ppc_core99_init(MachineState *machine)
         bios_size = -1;
     }
     if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
+        error_report("could not load PowerPC bios '%s'", bios_name);
         exit(1);
     }
 
@@ -252,7 +253,7 @@ static void ppc_core99_init(MachineState *machine)
                                               kernel_base,
                                               ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -261,8 +262,8 @@ static void ppc_core99_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
             cmdline_base = round_page(initrd_base + initrd_size);
@@ -344,7 +345,7 @@ static void ppc_core99_init(MachineState *machine)
             break;
 #endif /* defined(TARGET_PPC64) */
         default:
-            hw_error("Bus model not supported on mac99 machine\n");
+            error_report("Bus model not supported on mac99 machine");
             exit(1);
         }
     }
diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 21eaf0e..c3f9fe3 100644
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -38,6 +38,7 @@
 #include "hw/ide.h"
 #include "hw/loader.h"
 #include "elf.h"
+#include "qemu/error-report.h"
 #include "sysemu/kvm.h"
 #include "kvm_ppc.h"
 #include "sysemu/block-backend.h"
@@ -153,7 +154,7 @@ static void ppc_heathrow_init(MachineState *machine)
         bios_size = -1;
     }
     if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
+        error_report("could not load PowerPC bios '%s'", bios_name);
         exit(1);
     }
 
@@ -178,8 +179,7 @@ static void ppc_heathrow_init(MachineState *machine)
                                               kernel_base,
                                               ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n",
-                      kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -188,8 +188,8 @@ static void ppc_heathrow_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
             cmdline_base = round_page(initrd_base + initrd_size);
@@ -246,7 +246,8 @@ static void ppc_heathrow_init(MachineState *machine)
                 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
             break;
         default:
-            hw_error("Bus model not supported on OldWorld Mac machine\n");
+            error_report("Bus model not supported on OldWorld Mac machine");
+            exit(1);
         }
     }
 
@@ -259,7 +260,8 @@ static void ppc_heathrow_init(MachineState *machine)
 
     /* init basic PC hardware */
     if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
-        hw_error("Only 6xx bus is supported on heathrow machine\n");
+        error_report("Only 6xx bus is supported on heathrow machine");
+        exit(1);
     }
     pic = heathrow_pic_init(&pic_mem, 1, heathrow_irqs);
     pci_bus = pci_grackle_init(0xfec00000, pic,
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index 5ad28f7..0e102fc 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -33,6 +33,7 @@
 #include "hw/pci/pci_host.h"
 #include "hw/ppc/ppc.h"
 #include "hw/boards.h"
+#include "qemu/error-report.h"
 #include "qemu/log.h"
 #include "hw/ide.h"
 #include "hw/loader.h"
@@ -532,7 +533,7 @@ static void ppc_prep_init(MachineState *machine)
         kernel_size = load_image_targphys(kernel_filename, kernel_base,
                                           ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -541,8 +542,9 @@ static void ppc_prep_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                          initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
+                exit(1);
             }
         } else {
             initrd_base = 0;
@@ -569,7 +571,8 @@ static void ppc_prep_init(MachineState *machine)
     }
 
     if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
-        hw_error("Only 6xx bus is supported on PREP machine\n");
+        error_report("Only 6xx bus is supported on PREP machine");
+        exit(1);
     }
 
     dev = qdev_create(NULL, "raven-pcihost");
diff --git a/hw/unicore32/puv3.c b/hw/unicore32/puv3.c
index 91117b2..1968202 100644
--- a/hw/unicore32/puv3.c
+++ b/hw/unicore32/puv3.c
@@ -17,6 +17,7 @@
 #include "hw/boards.h"
 #include "hw/loader.h"
 #include "hw/i386/pc.h"
+#include "qemu/error-report.h"
 #include "sysemu/qtest.h"
 
 #undef DEBUG_PUV3
@@ -95,7 +96,8 @@ static void puv3_load_kernel(const char *kernel_filename)
     size = load_image_targphys(kernel_filename, KERNEL_LOAD_ADDR,
             KERNEL_MAX_SIZE);
     if (size < 0) {
-        hw_error("Load kernel error: '%s'\n", kernel_filename);
+        error_report("Load kernel error: '%s'", kernel_filename);
+        exit(1);
     }
 
     /* cheat curses that we have a graphic console, only under ocd console */
@@ -112,7 +114,8 @@ static void puv3_init(MachineState *machine)
     UniCore32CPU *cpu;
 
     if (initrd_filename) {
-        hw_error("Please use kernel built-in initramdisk.\n");
+        error_report("Please use kernel built-in initramdisk");
+        exit(1);
     }
 
     if (!cpu_model) {
@@ -121,7 +124,8 @@ static void puv3_init(MachineState *machine)
 
     cpu = uc32_cpu_init(cpu_model);
     if (!cpu) {
-        hw_error("Unable to find CPU definition\n");
+        error_report("Unable to find CPU definition");
+        exit(1);
     }
     env = &cpu->env;
 
-- 
2.4.3