From: David Gibson <david@gibson.dropbear.id.au>
To: armbru@redhat.com
Cc: aik@ozlabs.ru, David Gibson <david@gibson.dropbear.id.au>,
qemu-ppc@nongnu.org, mdroth@linux.vnet.ibm.com,
qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 01/10] ppc: Cleanup error handling in ppc_set_compat()
Date: Fri, 15 Jan 2016 23:00:35 +1100 [thread overview]
Message-ID: <1452859244-9500-2-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1452859244-9500-1-git-send-email-david@gibson.dropbear.id.au>
Current ppc_set_compat() returns -1 for errors, and also (unconditionally)
reports an error message. The caller in h_client_architecture_support()
may then report it again using an outdated fprintf().
Clean this up by using the modern error reporting mechanisms.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/ppc/spapr.c | 4 +---
hw/ppc/spapr_hcall.c | 10 +++++-----
target-ppc/cpu.h | 2 +-
target-ppc/translate_init.c | 13 +++++++------
4 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 50e5a26..fa7a7f4 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1635,9 +1635,7 @@ static void spapr_cpu_init(sPAPRMachineState *spapr, PowerPCCPU *cpu)
}
if (cpu->max_compat) {
- if (ppc_set_compat(cpu, cpu->max_compat) < 0) {
- exit(1);
- }
+ ppc_set_compat(cpu, cpu->max_compat, &error_fatal);
}
xics_cpu_setup(spapr->icp, cpu);
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index cebceea..8b0fcb3 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -837,7 +837,7 @@ static target_ulong cas_get_option_vector(int vector, target_ulong table)
typedef struct {
PowerPCCPU *cpu;
uint32_t cpu_version;
- int ret;
+ Error *err;
} SetCompatState;
static void do_set_compat(void *arg)
@@ -845,7 +845,7 @@ static void do_set_compat(void *arg)
SetCompatState *s = arg;
cpu_synchronize_state(CPU(s->cpu));
- s->ret = ppc_set_compat(s->cpu, s->cpu_version);
+ ppc_set_compat(s->cpu, s->cpu_version, &s->err);
}
#define get_compat_level(cpuver) ( \
@@ -929,13 +929,13 @@ static target_ulong h_client_architecture_support(PowerPCCPU *cpu_,
SetCompatState s = {
.cpu = POWERPC_CPU(cs),
.cpu_version = cpu_version,
- .ret = 0
+ .err = NULL,
};
run_on_cpu(cs, do_set_compat, &s);
- if (s.ret < 0) {
- fprintf(stderr, "Unable to set compatibility mode\n");
+ if (s.err) {
+ error_report_err(s.err);
return H_HARDWARE;
}
}
diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index 9706000..b3b89e6 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -1210,7 +1210,7 @@ void ppc_store_msr (CPUPPCState *env, target_ulong value);
void ppc_cpu_list (FILE *f, fprintf_function cpu_fprintf);
int ppc_get_compat_smt_threads(PowerPCCPU *cpu);
-int ppc_set_compat(PowerPCCPU *cpu, uint32_t cpu_version);
+void ppc_set_compat(PowerPCCPU *cpu, uint32_t cpu_version, Error **errp);
/* Time-base and decrementer management */
#ifndef NO_CPU_IO_DEFS
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index e88dc7f..d0feed0 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -9186,7 +9186,7 @@ int ppc_get_compat_smt_threads(PowerPCCPU *cpu)
return ret;
}
-int ppc_set_compat(PowerPCCPU *cpu, uint32_t cpu_version)
+void ppc_set_compat(PowerPCCPU *cpu, uint32_t cpu_version, Error **errp)
{
int ret = 0;
CPUPPCState *env = &cpu->env;
@@ -9208,12 +9208,13 @@ int ppc_set_compat(PowerPCCPU *cpu, uint32_t cpu_version)
break;
}
- if (kvm_enabled() && kvmppc_set_compat(cpu, cpu->cpu_version) < 0) {
- error_report("Unable to set compatibility mode in KVM");
- ret = -1;
+ if (kvm_enabled()) {
+ ret = kvmppc_set_compat(cpu, cpu->cpu_version);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret,
+ "Unable to set CPU compatibility mode in KVM");
+ }
}
-
- return ret;
}
static gint ppc_cpu_compare_class_pvr(gconstpointer a, gconstpointer b)
--
2.5.0
next prev parent reply other threads:[~2016-01-15 12:00 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-15 12:00 [Qemu-devel] [PATCH 00/10] Cleanups to error reporting on ppc and spapr (v2) David Gibson
2016-01-15 12:00 ` David Gibson [this message]
2016-01-15 15:19 ` [Qemu-devel] [PATCH 01/10] ppc: Cleanup error handling in ppc_set_compat() Markus Armbruster
2016-01-17 9:32 ` David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 02/10] pseries: Cleanup error handling of spapr_cpu_init() David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 03/10] pseries: Clean up hash page table allocation error handling David Gibson
2016-01-18 2:44 ` Alexey Kardashevskiy
2016-01-18 4:42 ` David Gibson
2016-01-18 5:17 ` Alexey Kardashevskiy
2016-01-18 5:35 ` David Gibson
2016-01-18 6:04 ` Alexey Kardashevskiy
2016-01-18 8:17 ` David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 04/10] pseries: Clean up error handling in spapr_validate_node_memory() David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 05/10] pseries: Cleanup error handling in spapr_vga_init() David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 06/10] pseries: Improve error handling in find_unknown_sysbus_device() David Gibson
2016-01-15 15:40 ` Markus Armbruster
2016-01-18 2:50 ` David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 07/10] pseries: Clean up error handling in spapr_rtas_register() David Gibson
2016-01-19 22:58 ` Eric Blake
2016-01-20 0:21 ` Alexey Kardashevskiy
2016-01-20 4:53 ` Eric Blake
2016-01-20 5:53 ` Alexey Kardashevskiy
2016-01-20 10:08 ` Thomas Huth
2016-01-20 7:18 ` Markus Armbruster
2016-01-20 8:15 ` Alexey Kardashevskiy
2016-01-20 9:27 ` Markus Armbruster
2016-01-15 12:00 ` [Qemu-devel] [PATCH 08/10] pseries: Clean up error handling in xics_system_init() David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 09/10] pseries: Clean up error reporting in ppc_spapr_init() David Gibson
2016-01-15 12:00 ` [Qemu-devel] [PATCH 10/10] pseries: Clean up error reporting in htab migration functions David Gibson
2016-01-15 15:47 ` [Qemu-devel] [PATCH 00/10] Cleanups to error reporting on ppc and spapr (v2) Markus Armbruster
2016-01-16 13:15 ` David Gibson
2016-01-17 23:56 ` Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452859244-9500-2-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=aik@ozlabs.ru \
--cc=armbru@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).