From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
qemu-arm@nongnu.org, patches@linaro.org
Subject: [Qemu-devel] [PATCH] target-arm: Make various system registers visible to EL3
Date: Tue, 19 Jan 2016 18:23:22 +0000 [thread overview]
Message-ID: <1453227802-9991-1-git-send-email-peter.maydell@linaro.org> (raw)
The AArch64 system registers DACR32_EL2, IFSR32_EL2, SPSR_IRQ,
SPSR_ABT, SPSR_UND and SPSR_FIQ are visible and fully functional from
EL3 even if the CPU has no EL2 (unlike some others which are RES0
from EL3 in that configuration). Move them from el2_cp_reginfo[] to
v8_cp_reginfo[] so they are always present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/helper.c | 58 ++++++++++++++++++++++++++---------------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index e8ede3f..999c617 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3166,6 +3166,35 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.type = ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]),
.access = PL2_RW, .accessfn = fpexc32_access },
+ { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
+ .access = PL2_RW, .resetvalue = 0,
+ .writefn = dacr_write, .raw_writefn = raw_write,
+ .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) },
+ { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1,
+ .access = PL2_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) },
+ { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64,
+ .type = ARM_CP_ALIAS,
+ .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 0,
+ .access = PL2_RW,
+ .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_IRQ]) },
+ { .name = "SPSR_ABT", .state = ARM_CP_STATE_AA64,
+ .type = ARM_CP_ALIAS,
+ .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 1,
+ .access = PL2_RW,
+ .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_ABT]) },
+ { .name = "SPSR_UND", .state = ARM_CP_STATE_AA64,
+ .type = ARM_CP_ALIAS,
+ .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 2,
+ .access = PL2_RW,
+ .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_UND]) },
+ { .name = "SPSR_FIQ", .state = ARM_CP_STATE_AA64,
+ .type = ARM_CP_ALIAS,
+ .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3,
+ .access = PL2_RW,
+ .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) },
REGINFO_SENTINEL
};
@@ -3293,11 +3322,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
.writefn = hcr_write },
- { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
- .access = PL2_RW, .resetvalue = 0,
- .writefn = dacr_write, .raw_writefn = raw_write,
- .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) },
{ .name = "ELR_EL2", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_ALIAS,
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1,
@@ -3307,10 +3331,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.type = ARM_CP_ALIAS,
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0,
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[2]) },
- { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1,
- .access = PL2_RW, .resetvalue = 0,
- .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) },
{ .name = "FAR_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0,
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[2]) },
@@ -3319,26 +3339,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 0,
.access = PL2_RW,
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_HYP]) },
- { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64,
- .type = ARM_CP_ALIAS,
- .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 0,
- .access = PL2_RW,
- .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_IRQ]) },
- { .name = "SPSR_ABT", .state = ARM_CP_STATE_AA64,
- .type = ARM_CP_ALIAS,
- .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 1,
- .access = PL2_RW,
- .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_ABT]) },
- { .name = "SPSR_UND", .state = ARM_CP_STATE_AA64,
- .type = ARM_CP_ALIAS,
- .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 2,
- .access = PL2_RW,
- .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_UND]) },
- { .name = "SPSR_FIQ", .state = ARM_CP_STATE_AA64,
- .type = ARM_CP_ALIAS,
- .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3,
- .access = PL2_RW,
- .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) },
{ .name = "VBAR_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
.access = PL2_RW, .writefn = vbar_write,
--
1.9.1
next reply other threads:[~2016-01-19 18:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-19 18:23 Peter Maydell [this message]
2016-01-20 12:19 ` [Qemu-devel] [PATCH] target-arm: Make various system registers visible to EL3 Edgar E. Iglesias
2016-01-20 17:22 ` [Qemu-devel] [Qemu-arm] " Sergey Fedorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453227802-9991-1-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=patches@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).