From: Jason Wang <jasowang@redhat.com>
To: peter.maydell@linaro.org, qemu-devel@nongnu.org
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>,
Guillaume Subiron <maethor@subiron.org>
Subject: [Qemu-devel] [PULL V2 07/17] slirp: Adding address family switch for produced frames
Date: Thu, 4 Feb 2016 16:31:36 +0800 [thread overview]
Message-ID: <1454574706-5681-8-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1454574706-5681-1-git-send-email-jasowang@redhat.com>
From: Guillaume Subiron <maethor@subiron.org>
In if_encap, a switch is added to prepare for the IPv6 case. Some code
is factorized.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
slirp/slirp.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 48 insertions(+), 13 deletions(-)
diff --git a/slirp/slirp.c b/slirp/slirp.c
index 1d5d172..f8dc505 100644
--- a/slirp/slirp.c
+++ b/slirp/slirp.c
@@ -762,20 +762,15 @@ void slirp_input(Slirp *slirp, const uint8_t *pkt, int pkt_len)
}
}
-/* Output the IP packet to the ethernet device. Returns 0 if the packet must be
- * re-queued.
+/* Prepare the IPv4 packet to be sent to the ethernet device. Returns 1 if no
+ * packet should be sent, 0 if the packet must be re-queued, 2 if the packet
+ * is ready to go.
*/
-int if_encap(Slirp *slirp, struct mbuf *ifm)
+static int if_encap4(Slirp *slirp, struct mbuf *ifm, struct ethhdr *eh,
+ uint8_t ethaddr[ETH_ALEN])
{
- uint8_t buf[1600];
- struct ethhdr *eh = (struct ethhdr *)buf;
- uint8_t ethaddr[ETH_ALEN];
const struct ip *iph = (const struct ip *)ifm->m_data;
- if (ifm->m_len + ETH_HLEN > sizeof(buf)) {
- return 1;
- }
-
if (iph->ip_dst.s_addr == 0) {
/* 0.0.0.0 can not be a destination address, something went wrong,
* avoid making it worse */
@@ -819,15 +814,55 @@ int if_encap(Slirp *slirp, struct mbuf *ifm)
}
return 0;
} else {
- memcpy(eh->h_dest, ethaddr, ETH_ALEN);
memcpy(eh->h_source, special_ethaddr, ETH_ALEN - 4);
/* XXX: not correct */
memcpy(&eh->h_source[2], &slirp->vhost_addr, 4);
eh->h_proto = htons(ETH_P_IP);
- memcpy(buf + sizeof(struct ethhdr), ifm->m_data, ifm->m_len);
- slirp_output(slirp->opaque, buf, ifm->m_len + ETH_HLEN);
+
+ /* Send this */
+ return 2;
+ }
+}
+
+/* Output the IP packet to the ethernet device. Returns 0 if the packet must be
+ * re-queued.
+ */
+int if_encap(Slirp *slirp, struct mbuf *ifm)
+{
+ uint8_t buf[1600];
+ struct ethhdr *eh = (struct ethhdr *)buf;
+ uint8_t ethaddr[ETH_ALEN];
+ const struct ip *iph = (const struct ip *)ifm->m_data;
+ int ret;
+
+ if (ifm->m_len + ETH_HLEN > sizeof(buf)) {
return 1;
}
+
+ switch (iph->ip_v) {
+ case IPVERSION:
+ ret = if_encap4(slirp, ifm, eh, ethaddr);
+ if (ret < 2) {
+ return ret;
+ }
+ break;
+
+ default:
+ /* Do not assert while we don't manage IP6VERSION */
+ /* assert(0); */
+ break;
+ }
+
+ memcpy(eh->h_dest, ethaddr, ETH_ALEN);
+ DEBUG_ARGS((dfd, " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ eh->h_source[0], eh->h_source[1], eh->h_source[2],
+ eh->h_source[3], eh->h_source[4], eh->h_source[5]));
+ DEBUG_ARGS((dfd, " dst = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ eh->h_dest[0], eh->h_dest[1], eh->h_dest[2],
+ eh->h_dest[3], eh->h_dest[4], eh->h_dest[5]));
+ memcpy(buf + sizeof(struct ethhdr), ifm->m_data, ifm->m_len);
+ slirp_output(slirp->opaque, buf, ifm->m_len + ETH_HLEN);
+ return 1;
}
/* Drop host forwarding rule, return 0 if found. */
--
2.5.0
next prev parent reply other threads:[~2016-02-04 8:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 8:31 [Qemu-devel] [PULL V2 00/17] Net patches Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 01/17] net/slirp: Tell the users when they are using deprecated options Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 02/17] qemu-doc: Do not promote deprecated -smb and -redir options Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 03/17] net: cadence_gem: check packet size in gem_recieve Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 04/17] cadence_gem: fix buffer overflow Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 05/17] slirp: goto bad in udp_input if sosendto fails Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 06/17] slirp: Generalizing and neutralizing ARP code Jason Wang
2016-02-04 8:31 ` Jason Wang [this message]
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 08/17] slirp: Make Socket structure IPv6 compatible Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 09/17] slirp: Factorizing address translation Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 10/17] slirp: Factorizing and cleaning solookup() Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 11/17] slirp: Add sockaddr_equal, make solookup family-agnostic Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 12/17] slirp: Make udp_attach IPv6 compatible Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 13/17] slirp: Adding family argument to tcp_fconnect() Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 14/17] e1000: eliminate infinite loops on out-of-bounds transfer start Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 15/17] net: netmap: use nm_open() to open netmap ports Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 16/17] net: always walk through filters in reverse if traffic is egress Jason Wang
2016-02-04 8:31 ` [Qemu-devel] [PULL V2 17/17] net/filter: Fix the output information for command 'info network' Jason Wang
2016-02-04 16:15 ` [Qemu-devel] [PULL V2 00/17] Net patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454574706-5681-8-git-send-email-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=maethor@subiron.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=samuel.thibault@ens-lyon.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).