qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: marcin.krzeminski@nokia.com
To: qemu-devel@nongnu.org
Cc: crosthwaitepeter@gmail.com, clg@fr.ibm.com,
	pawel.lenkow@itlen.com, marcin.krzeminski@nokia.com
Subject: [Qemu-devel] [PATCH v4 08/11] block: m25p80: Fast read and 4bytes commands
Date: Mon, 22 Feb 2016 09:03:22 +0100	[thread overview]
Message-ID: <1456128205-5092-9-git-send-email-marcin.krzeminski@nokia.com> (raw)
In-Reply-To: <1456128205-5092-1-git-send-email-marcin.krzeminski@nokia.com>

From: Marcin Krzeminski <marcin.krzeminski@nokia.com>

Adds fast read and 4bytes commands family.
This work is based on Pawel Lenkow patch from v1.

Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
---
 hw/block/m25p80.c | 48 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index aff28f3..4acc79a 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -224,19 +224,28 @@ typedef enum {
     BULK_ERASE = 0xc7,
 
     READ = 0x3,
-    FAST_READ = 0xb,
+    READ4 = 0x13,
+    FAST_READ = 0x0b,
+    FAST_READ4 = 0x0c,
     DOR = 0x3b,
+    DOR4 = 0x3c,
     QOR = 0x6b,
+    QOR4 = 0x6c,
     DIOR = 0xbb,
+    DIOR4 = 0xbc,
     QIOR = 0xeb,
+    QIOR4 = 0xec,
 
     PP = 0x2,
+    PP4 = 0x12,
     DPP = 0xa2,
     QPP = 0x32,
 
     ERASE_4K = 0x20,
+    ERASE4_4K = 0x21,
     ERASE_32K = 0x52,
     ERASE_SECTOR = 0xd8,
+    ERASE4_SECTOR = 0xdc,
 
     EN_4BYTE_ADDR = 0xB7,
     EX_4BYTE_ADDR = 0xE9,
@@ -359,6 +368,7 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
 
     switch (cmd) {
     case ERASE_4K:
+    case ERASE4_4K:
         len = 4 << 10;
         capa_to_assert = ER_4K;
         break;
@@ -367,6 +377,7 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
         capa_to_assert = ER_32K;
         break;
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
         len = s->pi->sector_size;
         break;
     case BULK_ERASE:
@@ -425,7 +436,20 @@ void flash_write8(Flash *s, uint64_t addr, uint8_t data)
 
 static inline int get_addr_length(Flash *s)
 {
-    return s->four_bytes_address_mode ? 4 : 3;
+   switch (s->cmd_in_progress) {
+   case PP4:
+   case READ4:
+   case QIOR4:
+   case ERASE4_4K:
+   case ERASE4_SECTOR:
+   case FAST_READ4:
+   case DOR4:
+   case QOR4:
+   case DIOR4:
+       return 4;
+   default:
+       return s->four_bytes_address_mode ? 4 : 3;
+   }
 }
 
 static void complete_collecting_data(Flash *s)
@@ -449,19 +473,28 @@ static void complete_collecting_data(Flash *s)
     case DPP:
     case QPP:
     case PP:
+    case PP4:
         s->state = STATE_PAGE_PROGRAM;
         break;
     case READ:
+    case READ4:
     case FAST_READ:
+    case FAST_READ4:
     case DOR:
+    case DOR4:
     case QOR:
+    case QOR4:
     case DIOR:
+    case DIOR4:
     case QIOR:
+    case QIOR4:
         s->state = STATE_READ;
         break;
     case ERASE_4K:
+    case ERASE4_4K:
     case ERASE_32K:
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
         flash_erase(s, s->cur_addr, s->cmd_in_progress);
         break;
     case WRSR:
@@ -550,12 +583,16 @@ static void decode_new_cmd(Flash *s, uint32_t value)
     switch (value) {
 
     case ERASE_4K:
+    case ERASE4_4K:
     case ERASE_32K:
     case ERASE_SECTOR:
+    case ERASE4_SECTOR:
     case READ:
+    case READ4:
     case DPP:
     case QPP:
     case PP:
+    case PP4:
         s->needed_bytes = get_addr_length(s);
         s->pos = 0;
         s->len = 0;
@@ -563,11 +600,14 @@ static void decode_new_cmd(Flash *s, uint32_t value)
         break;
 
     case FAST_READ:
+    case FAST_READ4:
     case DOR:
+    case DOR4:
     case QOR:
+    case QOR4:
         s->needed_bytes = get_addr_length(s);
         if (((s->pi->jedec >> 16) & 0xFF) == JEDEC_NUMONYX) {
-            /* Dummy cycles modeled with bytes writes instead of bits */
+            /* Dummy cycles - modeled with bytes writes instead of bits */
             s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
         }
         s->pos = 0;
@@ -576,6 +616,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
         break;
 
     case DIOR:
+    case DIOR4:
         switch ((s->pi->jedec >> 16) & 0xFF) {
         case JEDEC_WINBOND:
         case JEDEC_SPANSION:
@@ -595,6 +636,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
         break;
 
     case QIOR:
+    case QIOR4:
         switch ((s->pi->jedec >> 16) & 0xFF) {
         case JEDEC_WINBOND:
         case JEDEC_SPANSION:
-- 
2.5.0

  parent reply	other threads:[~2016-02-22  8:03 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-22  8:03 [Qemu-devel] [PATCH v4 00/11] Support for N25Q256/512 and AT25128/256 marcin.krzeminski
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 01/11] block: m25p80: Removed unused variable marcin.krzeminski
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 02/11] block: m25p80: RESET_ENABLE and RESET_MEMORY commnads marcin.krzeminski
2016-03-17 17:42   ` Peter Crosthwaite
2016-03-17 21:54     ` [Qemu-devel] ODP: " Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 03/11] block: m25p80: Widen flags variable marcin.krzeminski
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 04/11] block: m25p80: Extend address mode marcin.krzeminski
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 05/11] block: m25p80: 4byte " marcin.krzeminski
2016-03-17 17:27   ` Peter Crosthwaite
2016-03-18 13:00     ` Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 06/11] block: m25p80: Add configuration registers marcin.krzeminski
2016-03-17 17:24   ` Peter Crosthwaite
2016-03-17 21:46     ` [Qemu-devel] ODP: " Krzeminski, Marcin (Nokia - PL/Wroclaw)
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 07/11] block: m25p80: Dummy cycles for N25Q256/512 marcin.krzeminski
2016-03-17 17:30   ` Peter Crosthwaite
2016-02-22  8:03 ` marcin.krzeminski [this message]
2016-03-17 17:35   ` [Qemu-devel] [PATCH v4 08/11] block: m25p80: Fast read and 4bytes commands Peter Crosthwaite
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 09/11] block: m25p80: Implemented FSR register marcin.krzeminski
2016-03-17 17:37   ` Peter Crosthwaite
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 10/11] block: m25p80: n25q256a/n25q512a models marcin.krzeminski
2016-02-22  8:03 ` [Qemu-devel] [PATCH v4 11/11] block: m25p80: at25128a/at25256a models marcin.krzeminski
2016-03-17 17:39   ` Peter Crosthwaite
2016-03-17 21:51     ` [Qemu-devel] ODP: " Krzeminski, Marcin (Nokia - PL/Wroclaw)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456128205-5092-9-git-send-email-marcin.krzeminski@nokia.com \
    --to=marcin.krzeminski@nokia.com \
    --cc=clg@fr.ibm.com \
    --cc=crosthwaitepeter@gmail.com \
    --cc=pawel.lenkow@itlen.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).