From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/34] block: Fix -incoming with snapshot=on
Date: Mon, 22 Feb 2016 17:32:22 +0100 [thread overview]
Message-ID: <1456158772-9344-5-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1456158772-9344-1-git-send-email-kwolf@redhat.com>
The BDRV_O_INACTIVE flag should only be set for images explicitly opened
by the user. snapshot=on needs to create a new qcow2 image and write
some metadata to it. This is not a problem because it can't come from
the source, so there's no reason to mark it as BDRV_O_INACTIVE, even
though it is opened while waiting for the migration to complete.
This fixes an assertion failure when -incoming and snapshot=on are
combined.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 4 ----
blockdev.c | 8 +++++++
tests/qemu-iotests/145 | 52 ++++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/145.out | 5 +++++
tests/qemu-iotests/group | 1 +
5 files changed, 66 insertions(+), 4 deletions(-)
create mode 100755 tests/qemu-iotests/145
create mode 100644 tests/qemu-iotests/145.out
diff --git a/block.c b/block.c
index efc3c43..ba24b8e 100644
--- a/block.c
+++ b/block.c
@@ -1191,10 +1191,6 @@ static int bdrv_fill_options(QDict **options, const char *filename,
}
}
- if (runstate_check(RUN_STATE_INMIGRATE)) {
- *flags |= BDRV_O_INACTIVE;
- }
-
return 0;
}
diff --git a/blockdev.c b/blockdev.c
index 1f73478..ed97d8a 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -610,6 +610,10 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
qdict_put(bs_opts, BDRV_OPT_CACHE_NO_FLUSH, qstring_from_str("on"));
}
+ if (runstate_check(RUN_STATE_INMIGRATE)) {
+ bdrv_flags |= BDRV_O_INACTIVE;
+ }
+
blk = blk_new_open(qemu_opts_id(opts), file, NULL, bs_opts, bdrv_flags,
errp);
if (!blk) {
@@ -688,6 +692,10 @@ static BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp)
goto fail;
}
+ if (runstate_check(RUN_STATE_INMIGRATE)) {
+ bdrv_flags |= BDRV_O_INACTIVE;
+ }
+
bs = NULL;
ret = bdrv_open(&bs, NULL, NULL, bs_opts, bdrv_flags, errp);
if (ret < 0) {
diff --git a/tests/qemu-iotests/145 b/tests/qemu-iotests/145
new file mode 100755
index 0000000..7d8febb
--- /dev/null
+++ b/tests/qemu-iotests/145
@@ -0,0 +1,52 @@
+#!/bin/bash
+#
+# Test the combination of -incoming and snapshot=on
+#
+# Copyright (C) 2016 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=kwolf@redhat.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+ true
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt generic
+_supported_proto generic
+_supported_os Linux
+
+_make_test_img 1M
+echo quit | $QEMU -nographic -hda "$TEST_IMG" -incoming 'exec:true' -snapshot -serial none -monitor stdio | _filter_qemu
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/145.out b/tests/qemu-iotests/145.out
new file mode 100644
index 0000000..75b5c8a
--- /dev/null
+++ b/tests/qemu-iotests/145.out
@@ -0,0 +1,5 @@
+QA output created by 145
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) q^[[K^[[Dqu^[[K^[[D^[[Dqui^[[K^[[D^[[D^[[Dquit^[[K
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 65df029..47fd40c 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -147,3 +147,4 @@
142 auto
143 auto quick
144 rw auto quick
+145 auto quick
--
1.8.3.1
next prev parent reply other threads:[~2016-02-22 16:33 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 16:32 [Qemu-devel] [PULL 00/34] Block layer patches Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 01/34] qemu-img: initialize MapEntry object Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 02/34] quorum: fix segfault when read fails in fifo mode Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 03/34] spec: add qcow2 bitmaps extension specification Kevin Wolf
2016-02-22 16:32 ` Kevin Wolf [this message]
2016-02-22 16:32 ` [Qemu-devel] [PULL 05/34] qemu-io: add support for --object command line arg Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 06/34] qemu-img: " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 07/34] qemu-io: allow specifying image as a set of options args Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 08/34] qemu-nbd: " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 09/34] qemu-img: " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 10/34] qemu-nbd: don't overlap long option values with short options Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 11/34] qemu-nbd: use no_argument/required_argument constants Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 12/34] qemu-io: " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 13/34] block migration: Activate image on destination before writing to it Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 14/34] throttle: Make throttle_compute_timer() static Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 15/34] throttle: Make throttle_conflicting() set errp Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 16/34] throttle: Make throttle_max_is_missing_limit() " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 17/34] throttle: Make throttle_is_valid() " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 18/34] throttle: Set always an average value when setting a maximum value Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 19/34] throttle: Merge all functions that check the configuration into one Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 20/34] throttle: Use throttle_config_init() to initialize ThrottleConfig Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 21/34] throttle: Add support for burst periods Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 22/34] throttle: Add command-line settings to define the " Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 23/34] qapi: Add burst length parameters to block_set_io_throttle Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 24/34] qapi: Add burst length fields to BlockDeviceInfo Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 25/34] throttle: Check that burst_level leaks correctly Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 26/34] throttle: Test throttle_compute_wait() during bursts Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 27/34] qemu-iotests: Extend iotest 093 to test bursts Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 28/34] qapi: Correct the name of the iops_rd parameter Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 29/34] docs: Document the throttling infrastructure Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 30/34] MAINTAINERS: Add myself as maintainer of the throttling code Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 31/34] blockdev: unset inappropriate flags when changing medium Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 32/34] qemu-iotests: 067: ignore QMP events Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 33/34] qemu-iotests: 140: don't use IDE device Kevin Wolf
2016-02-22 16:32 ` [Qemu-devel] [PULL 34/34] qemu-iotests: 140: make description slightly more verbose Kevin Wolf
2016-02-22 17:46 ` [Qemu-devel] [PULL 00/34] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456158772-9344-5-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).