From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: agraf@suse.de
Subject: [Qemu-devel] [PATCH 2/3] target-ppc: Use 32-bit rotate instead of deposit + 64-bit rotate
Date: Tue, 23 Feb 2016 17:18:35 -0800 [thread overview]
Message-ID: <1456276716-28566-3-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1456276716-28566-1-git-send-email-rth@twiddle.net>
A 32-bit rotate insn is more common on hosts than a deposit insn,
and if the host has neither the result is truely horrific.
At the same time, tidy up the temporaries within these functions,
drop the over-use of "likely", drop some checks for identity that
will also be checked by tcg-op.c functions, and special case mask
without rotate within rlwinm.
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
target-ppc/translate.c | 172 ++++++++++++++++++++-----------------------------
1 file changed, 70 insertions(+), 102 deletions(-)
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 00c9a5a..b575609 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -1609,141 +1609,109 @@ static void gen_cntlzd(DisasContext *ctx)
/* rlwimi & rlwimi. */
static void gen_rlwimi(DisasContext *ctx)
{
- uint32_t mb, me, sh;
-
- mb = MB(ctx->opcode);
- me = ME(ctx->opcode);
- sh = SH(ctx->opcode);
- if (likely(sh == (31-me) && mb <= me)) {
- tcg_gen_deposit_tl(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rA(ctx->opcode)],
- cpu_gpr[rS(ctx->opcode)], sh, me - mb + 1);
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+ uint32_t sh = SH(ctx->opcode);
+ uint32_t mb = MB(ctx->opcode);
+ uint32_t me = ME(ctx->opcode);
+
+ if (sh == (31-me) && mb <= me) {
+ tcg_gen_deposit_tl(t_ra, t_ra, t_rs, sh, me - mb + 1);
} else {
target_ulong mask;
+ TCGv_i32 t0;
TCGv t1;
- TCGv t0 = tcg_temp_new();
-#if defined(TARGET_PPC64)
- tcg_gen_deposit_i64(t0, cpu_gpr[rS(ctx->opcode)],
- cpu_gpr[rS(ctx->opcode)], 32, 32);
- tcg_gen_rotli_i64(t0, t0, sh);
-#else
- tcg_gen_rotli_i32(t0, cpu_gpr[rS(ctx->opcode)], sh);
-#endif
+
#if defined(TARGET_PPC64)
mb += 32;
me += 32;
#endif
mask = MASK(mb, me);
+
+ t0 = tcg_temp_new_i32();
t1 = tcg_temp_new();
- tcg_gen_andi_tl(t0, t0, mask);
- tcg_gen_andi_tl(t1, cpu_gpr[rA(ctx->opcode)], ~mask);
- tcg_gen_or_tl(cpu_gpr[rA(ctx->opcode)], t0, t1);
- tcg_temp_free(t0);
+ tcg_gen_trunc_tl_i32(t0, t_rs);
+ tcg_gen_rotli_i32(t0, t0, sh);
+ tcg_gen_extu_i32_tl(t1, t0);
+ tcg_temp_free_i32(t0);
+
+ tcg_gen_andi_tl(t1, t1, mask);
+ tcg_gen_andi_tl(t_ra, t_ra, ~mask);
+ tcg_gen_or_tl(t_ra, t_ra, t1);
tcg_temp_free(t1);
}
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
+ }
}
/* rlwinm & rlwinm. */
static void gen_rlwinm(DisasContext *ctx)
{
- uint32_t mb, me, sh;
-
- sh = SH(ctx->opcode);
- mb = MB(ctx->opcode);
- me = ME(ctx->opcode);
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+ uint32_t sh = SH(ctx->opcode);
+ uint32_t mb = MB(ctx->opcode);
+ uint32_t me = ME(ctx->opcode);
- if (likely(mb == 0 && me == (31 - sh))) {
- if (likely(sh == 0)) {
- tcg_gen_ext32u_tl(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rS(ctx->opcode)]);
- } else {
- TCGv t0 = tcg_temp_new();
- tcg_gen_ext32u_tl(t0, cpu_gpr[rS(ctx->opcode)]);
- tcg_gen_shli_tl(t0, t0, sh);
- tcg_gen_ext32u_tl(cpu_gpr[rA(ctx->opcode)], t0);
- tcg_temp_free(t0);
- }
- } else if (likely(sh != 0 && me == 31 && sh == (32 - mb))) {
- TCGv t0 = tcg_temp_new();
- tcg_gen_ext32u_tl(t0, cpu_gpr[rS(ctx->opcode)]);
- tcg_gen_shri_tl(t0, t0, mb);
- tcg_gen_ext32u_tl(cpu_gpr[rA(ctx->opcode)], t0);
- tcg_temp_free(t0);
- } else if (likely(mb == 0 && me == 31)) {
- TCGv_i32 t0 = tcg_temp_new_i32();
- tcg_gen_trunc_tl_i32(t0, cpu_gpr[rS(ctx->opcode)]);
- tcg_gen_rotli_i32(t0, t0, sh);
- tcg_gen_extu_i32_tl(cpu_gpr[rA(ctx->opcode)], t0);
- tcg_temp_free_i32(t0);
+ if (mb == 0 && me == (31 - sh)) {
+ tcg_gen_shli_tl(t_ra, t_rs, sh);
+ tcg_gen_ext32u_tl(t_ra, t_ra);
+ } else if (sh != 0 && me == 31 && sh == (32 - mb)) {
+ tcg_gen_ext32u_tl(t_ra, t_rs);
+ tcg_gen_shri_tl(t_ra, t_ra, mb);
} else {
- TCGv t0 = tcg_temp_new();
-#if defined(TARGET_PPC64)
- tcg_gen_deposit_i64(t0, cpu_gpr[rS(ctx->opcode)],
- cpu_gpr[rS(ctx->opcode)], 32, 32);
- tcg_gen_rotli_i64(t0, t0, sh);
-#else
- tcg_gen_rotli_i32(t0, cpu_gpr[rS(ctx->opcode)], sh);
-#endif
#if defined(TARGET_PPC64)
mb += 32;
me += 32;
#endif
- tcg_gen_andi_tl(cpu_gpr[rA(ctx->opcode)], t0, MASK(mb, me));
- tcg_temp_free(t0);
+ if (sh == 0) {
+ tcg_gen_andi_tl(t_ra, t_rs, MASK(mb, me));
+ } else {
+ TCGv_i32 t0 = tcg_temp_new_i32();
+
+ tcg_gen_trunc_tl_i32(t0, t_rs);
+ tcg_gen_rotli_i32(t0, t0, sh);
+ tcg_gen_andi_i32(t0, t0, MASK(mb, me));
+ tcg_gen_extu_i32_tl(t_ra, t0);
+ tcg_temp_free_i32(t0);
+ }
+ }
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
}
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
}
/* rlwnm & rlwnm. */
static void gen_rlwnm(DisasContext *ctx)
{
- uint32_t mb, me;
- mb = MB(ctx->opcode);
- me = ME(ctx->opcode);
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+ TCGv t_rb = cpu_gpr[rB(ctx->opcode)];
+ uint32_t mb = MB(ctx->opcode);
+ uint32_t me = ME(ctx->opcode);
+ TCGv_i32 t0, t1;
- if (likely(mb == 0 && me == 31)) {
- TCGv_i32 t0, t1;
- t0 = tcg_temp_new_i32();
- t1 = tcg_temp_new_i32();
- tcg_gen_trunc_tl_i32(t0, cpu_gpr[rB(ctx->opcode)]);
- tcg_gen_trunc_tl_i32(t1, cpu_gpr[rS(ctx->opcode)]);
- tcg_gen_andi_i32(t0, t0, 0x1f);
- tcg_gen_rotl_i32(t1, t1, t0);
- tcg_gen_extu_i32_tl(cpu_gpr[rA(ctx->opcode)], t1);
- tcg_temp_free_i32(t0);
- tcg_temp_free_i32(t1);
- } else {
- TCGv t0;
#if defined(TARGET_PPC64)
- TCGv t1;
+ mb += 32;
+ me += 32;
#endif
- t0 = tcg_temp_new();
- tcg_gen_andi_tl(t0, cpu_gpr[rB(ctx->opcode)], 0x1f);
-#if defined(TARGET_PPC64)
- t1 = tcg_temp_new_i64();
- tcg_gen_deposit_i64(t1, cpu_gpr[rS(ctx->opcode)],
- cpu_gpr[rS(ctx->opcode)], 32, 32);
- tcg_gen_rotl_i64(t0, t1, t0);
- tcg_temp_free_i64(t1);
-#else
- tcg_gen_rotl_i32(t0, cpu_gpr[rS(ctx->opcode)], t0);
-#endif
- if (unlikely(mb != 0 || me != 31)) {
-#if defined(TARGET_PPC64)
- mb += 32;
- me += 32;
-#endif
- tcg_gen_andi_tl(cpu_gpr[rA(ctx->opcode)], t0, MASK(mb, me));
- } else {
- tcg_gen_andi_tl(t0, t0, MASK(32, 63));
- tcg_gen_mov_tl(cpu_gpr[rA(ctx->opcode)], t0);
- }
- tcg_temp_free(t0);
+ t0 = tcg_temp_new_i32();
+ t1 = tcg_temp_new_i32();
+ tcg_gen_trunc_tl_i32(t0, t_rb);
+ tcg_gen_trunc_tl_i32(t1, t_rs);
+ tcg_gen_andi_i32(t0, t0, 0x1f);
+ tcg_gen_rotl_i32(t1, t1, t0);
+ tcg_temp_free_i32(t0);
+
+ tcg_gen_andi_i32(t1, t1, MASK(mb, me));
+ tcg_gen_extu_i32_tl(t_ra, t1);
+ tcg_temp_free_i32(t1);
+
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
}
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
}
#if defined(TARGET_PPC64)
--
2.5.0
next prev parent reply other threads:[~2016-02-24 1:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-24 1:18 [Qemu-devel] [PATCH 0/3] target-ppc improvements Richard Henderson
2016-02-24 1:18 ` [Qemu-devel] [PATCH 1/3] target-ppc: Use movcond in isel Richard Henderson
2016-02-24 1:18 ` Richard Henderson [this message]
2016-02-24 1:18 ` [Qemu-devel] [PATCH 3/3] target-ppc: Cleanups to rldinm, rldnm, rldimi Richard Henderson
2016-03-15 23:57 ` [Qemu-devel] [PATCH 0/3] target-ppc improvements David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456276716-28566-3-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).