qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Eduardo Habkost <ehabkost@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	qemu-arm@nongnu.org, Shannon Zhao <zhaoshenglong@huawei.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PULL 01/23] bios-linker-loader: document+validate input
Date: Wed, 24 Feb 2016 22:35:07 +0200	[thread overview]
Message-ID: <1456343639-3471-2-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1456343639-3471-1-git-send-email-mst@redhat.com>

While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
the API was left undocumented.

This adds documentation for all API functions.

Additionally, input is validated to make sure all
pointers fall within range of provided files.

To allow this validation for checksum commands,
bios_linker_loader_add_checksum is changed to accept GArray * in place
of void *.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/acpi/bios-linker-loader.h |  2 +-
 hw/acpi/aml-build.c                  |  2 +-
 hw/acpi/bios-linker-loader.c         | 91 ++++++++++++++++++++++++++++++++++--
 hw/arm/virt-acpi-build.c             |  3 +-
 hw/i386/acpi-build.c                 |  3 +-
 5 files changed, 92 insertions(+), 9 deletions(-)

diff --git a/include/hw/acpi/bios-linker-loader.h b/include/hw/acpi/bios-linker-loader.h
index 498c0af..e54b6b4 100644
--- a/include/hw/acpi/bios-linker-loader.h
+++ b/include/hw/acpi/bios-linker-loader.h
@@ -13,7 +13,7 @@ void bios_linker_loader_alloc(GArray *linker,
                               bool alloc_fseg);
 
 void bios_linker_loader_add_checksum(GArray *linker, const char *file,
-                                     void *table,
+                                     GArray *table,
                                      void *start, unsigned size,
                                      uint8_t *checksum);
 
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index 603068b..6675535 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -1451,7 +1451,7 @@ build_header(GArray *linker, GArray *table_data,
     h->checksum = 0;
     /* Checksum to be filled in by Guest linker */
     bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
-                                    table_data->data, h, len, &h->checksum);
+                                    table_data, h, len, &h->checksum);
 }
 
 void *acpi_data_push(GArray *table_data, unsigned size)
diff --git a/hw/acpi/bios-linker-loader.c b/hw/acpi/bios-linker-loader.c
index e04d60a..ace9abb 100644
--- a/hw/acpi/bios-linker-loader.c
+++ b/hw/acpi/bios-linker-loader.c
@@ -25,6 +25,13 @@
 
 #include "qemu/bswap.h"
 
+/*
+ * Linker/loader is a paravirtualized interface that passes commands to guest.
+ * The commands can be used to request guest to
+ * - allocate memory chunks and initialize them from QEMU FW CFG files
+ * - link allocated chunks by storing pointer to one chunk into another
+ * - calculate ACPI checksum of part of the chunk and store into same chunk
+ */
 #define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH
 
 struct BiosLinkerLoaderEntry {
@@ -88,6 +95,12 @@ enum {
     BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2,
 };
 
+/*
+ * bios_linker_loader_init: allocate a new linker file blob array.
+ *
+ * After initialization, linker commands can be added, and will
+ * be stored in the array.
+ */
 GArray *bios_linker_loader_init(void)
 {
     return g_array_new(false, true /* clear */, 1);
@@ -99,6 +112,16 @@ void *bios_linker_loader_cleanup(GArray *linker)
     return g_array_free(linker, false);
 }
 
+/*
+ * bios_linker_loader_alloc: ask guest to load file into guest memory.
+ *
+ * @linker: linker file blob array
+ * @file: file to be loaded
+ * @alloc_align: required minimal alignment in bytes. Must be a power of 2.
+ * @alloc_fseg: request allocation in FSEG zone (useful for the RSDP ACPI table)
+ *
+ * Note: this command must precede any other linker command using this file.
+ */
 void bios_linker_loader_alloc(GArray *linker,
                               const char *file,
                               uint32_t alloc_align,
@@ -106,6 +129,8 @@ void bios_linker_loader_alloc(GArray *linker,
 {
     BiosLinkerLoaderEntry entry;
 
+    assert(!(alloc_align & (alloc_align - 1)));
+
     memset(&entry, 0, sizeof entry);
     strncpy(entry.alloc.file, file, sizeof entry.alloc.file - 1);
     entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ALLOCATE);
@@ -118,23 +143,77 @@ void bios_linker_loader_alloc(GArray *linker,
     g_array_prepend_vals(linker, &entry, sizeof entry);
 }
 
+/*
+ * bios_linker_loader_add_checksum: ask guest to add checksum of file data
+ * into (same) file at the specified pointer.
+ *
+ * Checksum calculation simply sums -X for each byte X in the range
+ * using 8-bit math (i.e. ACPI checksum).
+ *
+ * @linker: linker file blob array
+ * @file: file that includes the checksum to be calculated
+ *        and the data to be checksummed
+ * @table: @file blob contents
+ * @start, @size: range of data to checksum
+ * @checksum: location of the checksum to be patched within file blob
+ *
+ * Notes:
+ * - checksum byte initial value must have been pushed into @table
+ *   and reside at address @checksum.
+ * - @size bytes must have been pushed into @table and reside at address
+ *   @start.
+ * - Guest calculates checksum of specified range of data, result is added to
+ *   initial value at @checksum into copy of @file in Guest memory.
+ * - Range might include the checksum itself.
+ * - To avoid confusion, caller must always put 0x0 at @checksum.
+ * - @file must be loaded into Guest memory using bios_linker_loader_alloc
+ */
 void bios_linker_loader_add_checksum(GArray *linker, const char *file,
-                                     void *table,
+                                     GArray *table,
                                      void *start, unsigned size,
                                      uint8_t *checksum)
 {
     BiosLinkerLoaderEntry entry;
+    ptrdiff_t checksum_offset = (gchar *)checksum - table->data;
+    ptrdiff_t start_offset = (gchar *)start - table->data;
+
+    assert(checksum_offset >= 0);
+    assert(start_offset >= 0);
+    assert(checksum_offset + 1 <= table->len);
+    assert(start_offset + size <= table->len);
+    assert(*checksum == 0x0);
 
     memset(&entry, 0, sizeof entry);
     strncpy(entry.cksum.file, file, sizeof entry.cksum.file - 1);
     entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM);
-    entry.cksum.offset = cpu_to_le32(checksum - (uint8_t *)table);
-    entry.cksum.start = cpu_to_le32((uint8_t *)start - (uint8_t *)table);
+    entry.cksum.offset = cpu_to_le32(checksum_offset);
+    entry.cksum.start = cpu_to_le32(start_offset);
     entry.cksum.length = cpu_to_le32(size);
 
     g_array_append_vals(linker, &entry, sizeof entry);
 }
 
+/*
+ * bios_linker_loader_add_pointer: ask guest to add address of source file
+ * into destination file at the specified pointer.
+ *
+ * @linker: linker file blob array
+ * @dest_file: destination file that must be changed
+ * @src_file: source file who's address must be taken
+ * @table: @dest_file blob contents array
+ * @pointer: location of the pointer to be patched within destination file blob
+ * @pointer_size: size of pointer to be patched, in bytes
+ *
+ * Notes:
+ * - @pointer_size bytes must have been pushed into @table
+ *   and reside at address @pointer.
+ * - Guest address is added to initial value at @pointer
+ *   into copy of @dest_file in Guest memory.
+ *   e.g. to get start of src_file in guest memory, put 0x0 there
+ *   to get address of a field at offset 0x10 in src_file, put 0x10 there
+ * - Both @dest_file and @src_file must be
+ *   loaded into Guest memory using bios_linker_loader_alloc
+ */
 void bios_linker_loader_add_pointer(GArray *linker,
                                     const char *dest_file,
                                     const char *src_file,
@@ -142,7 +221,10 @@ void bios_linker_loader_add_pointer(GArray *linker,
                                     uint8_t pointer_size)
 {
     BiosLinkerLoaderEntry entry;
-    size_t offset = (gchar *)pointer - table->data;
+    ptrdiff_t offset = (gchar *)pointer - table->data;
+
+    assert(offset >= 0);
+    assert(offset + pointer_size <= table->len);
 
     memset(&entry, 0, sizeof entry);
     strncpy(entry.pointer.dest_file, dest_file,
@@ -150,7 +232,6 @@ void bios_linker_loader_add_pointer(GArray *linker,
     strncpy(entry.pointer.src_file, src_file,
             sizeof entry.pointer.src_file - 1);
     entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ADD_POINTER);
-    assert(table->len >= offset + pointer_size);
     entry.pointer.offset = cpu_to_le32(offset);
     entry.pointer.size = pointer_size;
     assert(pointer_size == 1 || pointer_size == 2 ||
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 8cf9a21..b8b3ece 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -359,7 +359,8 @@ build_rsdp(GArray *rsdp_table, GArray *linker, unsigned rsdt)
     rsdp->checksum = 0;
     /* Checksum to be filled by Guest linker */
     bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
-                                    rsdp, rsdp, sizeof *rsdp, &rsdp->checksum);
+                                    rsdp_table, rsdp, sizeof *rsdp,
+                                    &rsdp->checksum);
 
     return rsdp_table;
 }
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 4554eb8..52c9470 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2532,7 +2532,8 @@ build_rsdp(GArray *rsdp_table, GArray *linker, unsigned rsdt)
     rsdp->checksum = 0;
     /* Checksum to be filled by Guest linker */
     bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
-                                    rsdp, rsdp, sizeof *rsdp, &rsdp->checksum);
+                                    rsdp_table, rsdp, sizeof *rsdp,
+                                    &rsdp->checksum);
 
     return rsdp_table;
 }
-- 
MST

  reply	other threads:[~2016-02-24 20:35 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-24 20:35 [Qemu-devel] [PULL 00/23] vhost, virtio, pci, pc Michael S. Tsirkin
2016-02-24 20:35 ` Michael S. Tsirkin [this message]
2016-02-24 20:35 ` [Qemu-devel] [PULL 02/23] vhost-user: don't merge regions with different fds Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 03/23] move get_current_ram_size to virtio-balloon.c Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 04/23] pc-dimm: rename pc_dimm_built_list() Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 05/23] pc-dimm: add pc_dimm_build_list() Michael S. Tsirkin
2016-02-25  7:01   ` Vladimir Sementsov-Ogievskiy
2016-02-25  8:39     ` Michael S. Tsirkin
2016-02-25  8:55       ` Vladimir Sementsov-Ogievskiy
2016-02-25  9:11         ` Michael S. Tsirkin
2016-02-25  9:54           ` Vladimir Sementsov-Ogievskiy
2016-02-25 10:09             ` Paolo Bonzini
2016-02-25 10:12               ` Michael S. Tsirkin
2016-02-25 10:22               ` Michael S. Tsirkin
2016-02-26  9:08                 ` Vladimir Sementsov-Ogievskiy
2016-02-26  9:08               ` Vladimir Sementsov-Ogievskiy
2016-02-24 20:35 ` [Qemu-devel] [PULL 06/23] virtio-balloon: rewrite get_current_ram_size() Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 07/23] balloon: Use only 'pc-dimm' type dimm for ballooning Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 08/23] pci core: function pci_host_bus_register() cleanup Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 09/23] pci core: function pci_bus_init() cleanup Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 10/23] block-migration: acquire AioContext as necessary Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 11/23] vring: make vring_enable_notification return void Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 12/23] virtio: add AioContext-specific function for host notifiers Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 13/23] virtio: export vring_notify as virtio_should_notify Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 14/23] virtio-blk: fix "disabled data plane" mode Michael S. Tsirkin
2016-02-24 20:35 ` [Qemu-devel] [PULL 15/23] virtio-blk: do not use vring in dataplane Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 16/23] virtio-scsi: " Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 17/23] vring: remove Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 18/23] tests/vhost-user-bridge: fix build on 32 bit systems Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 19/23] q35: Remove old machine versions Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 20/23] machine: Remove no_tco field Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 21/23] ich9: Remove enable_tco arguments from init functions Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 22/23] q35: Remove unused q35-acpi-dsdt.aml file Michael S. Tsirkin
2016-02-24 20:36 ` [Qemu-devel] [PULL 23/23] q35: No need to check gigabyte_align Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456343639-3471-2-git-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=zhaoshenglong@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).