[Qemu-devel] [PULL 00/20] target-arm queue

[Qemu-devel] [PULL 00/20] target-arm queue

[Peter Maydell]

The following changes since commit 4d1e324b2241017c92d816ec3af51a14685dbf62:

  Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160226' into staging (2016-02-26 12:54:22 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160226

for you to fetch changes up to e20d84c1407d43d5a2e2ac95dbb46db3b0af8f9f:

  target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF (2016-02-26 15:09:42 +0000)

----------------------------------------------------------------
target-arm queue:
 * Clean up handling of bad mode switches writing to CPSR, and implement
   the ARMv8 requirement that they set PSTATE.IL
 * Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor
   register accesses
 * Don't implement stellaris-pl061-only registers on generic-pl061
 * Fix SD card handling for raspi
 * Add missing include files to MAINTAINERS
 * Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
 * Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF

----------------------------------------------------------------
Andrew Baumann (3):
      raspi: fix SD card with recent sdhci changes
      sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
      sdhci: add quirk property for card insert interrupt status on Raspberry Pi

Edgar E. Iglesias (1):
      target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW

Peter Maydell (14):
      target-arm: Give CPSR setting on 32-bit exception return its own helper
      target-arm: Add write_type argument to cpsr_write()
      target-arm: Raw CPSR writes should skip checks and bank switching
      linux-user: Use restrictive mask when calling cpsr_write()
      target-arm: In cpsr_write() ignore mode switches from User mode
      target-arm: Add comment about not implementing NSACR.RFR
      target-arm: Add Hyp mode checks to bad_mode_switch()
      target-arm: Forbid mode switch to Mon from Secure EL1
      target-arm: In v8, make illegal AArch32 mode changes set PSTATE.IL
      target-arm: Make mode switches from Hyp via CPS and MRS illegal
      target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1
      target-arm: Fix handling of SDCR for 32-bit code
      target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
      target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF

Thomas Huth (1):
      MAINTAINERS: Add some missing ARM related header files

Wei Huang (1):
      ARM: PL061: Checking register r/w accesses to reserved area

 MAINTAINERS                  |   4 +
 hw/arm/bcm2835_peripherals.c |   7 ++
 hw/arm/bcm2836.c             |   7 ++
 hw/arm/raspi.c               |  16 +++
 hw/gpio/pl061.c              |  30 ++++--
 hw/sd/sdhci.c                |  47 ++++++--
 include/hw/sd/sdhci.h        |   3 +-
 linux-user/arm/nwfpe/fpa11.h |   2 +-
 linux-user/main.c            |   7 +-
 linux-user/signal.c          |   4 +-
 target-arm/cpu-qom.h         |   1 +
 target-arm/cpu.h             |  17 ++-
 target-arm/gdbstub.c         |   2 +-
 target-arm/helper.c          | 250 +++++++++++++++++++++++++++++++++++++------
 target-arm/helper.h          |   1 +
 target-arm/kvm32.c           |   2 +-
 target-arm/kvm64.c           |   3 +-
 target-arm/machine.c         |   4 +-
 target-arm/op_helper.c       |  15 ++-
 target-arm/translate.c       |   6 +-
 20 files changed, 359 insertions(+), 69 deletions(-)

[Qemu-devel] [PULL 01/20] target-arm: Give CPSR setting on 32-bit exception return its own helper

[Peter Maydell]

The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.h    | 1 +
 target-arm/op_helper.c | 6 ++++++
 target-arm/translate.c | 6 +++---
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/target-arm/helper.h b/target-arm/helper.h
index c98e9ce..ea13202 100644
--- a/target-arm/helper.h
+++ b/target-arm/helper.h
@@ -57,6 +57,7 @@ DEF_HELPER_2(pre_smc, void, env, i32)
 DEF_HELPER_1(check_breakpoints, void, env)
 
 DEF_HELPER_3(cpsr_write, void, env, i32, i32)
+DEF_HELPER_2(cpsr_write_eret, void, env, i32)
 DEF_HELPER_1(cpsr_read, i32, env)
 
 DEF_HELPER_3(v7m_msr, void, env, i32, i32)
diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index 538887c..e3ddd5a 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -425,6 +425,12 @@ void HELPER(cpsr_write)(CPUARMState *env, uint32_t val, uint32_t mask)
     cpsr_write(env, val, mask);
 }
 
+/* Write the CPSR for a 32-bit exception return */
+void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val)
+{
+    cpsr_write(env, val, CPSR_ERET_MASK);
+}
+
 /* Access to user mode registers from privileged modes.  */
 uint32_t HELPER(get_user_reg)(CPUARMState *env, uint32_t regno)
 {
diff --git a/target-arm/translate.c b/target-arm/translate.c
index e69145d..413f7de 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -4094,7 +4094,7 @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc)
     TCGv_i32 tmp;
     store_reg(s, 15, pc);
     tmp = load_cpu_field(spsr);
-    gen_set_cpsr(tmp, CPSR_ERET_MASK);
+    gen_helper_cpsr_write_eret(cpu_env, tmp);
     tcg_temp_free_i32(tmp);
     s->is_jmp = DISAS_JUMP;
 }
@@ -4102,7 +4102,7 @@ static void gen_exception_return(DisasContext *s, TCGv_i32 pc)
 /* Generate a v6 exception return.  Marks both values as dead.  */
 static void gen_rfe(DisasContext *s, TCGv_i32 pc, TCGv_i32 cpsr)
 {
-    gen_set_cpsr(cpsr, CPSR_ERET_MASK);
+    gen_helper_cpsr_write_eret(cpu_env, cpsr);
     tcg_temp_free_i32(cpsr);
     store_reg(s, 15, pc);
     s->is_jmp = DISAS_JUMP;
@@ -9094,7 +9094,7 @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
                 if (exc_return) {
                     /* Restore CPSR from SPSR.  */
                     tmp = load_cpu_field(spsr);
-                    gen_set_cpsr(tmp, CPSR_ERET_MASK);
+                    gen_helper_cpsr_write_eret(cpu_env, tmp);
                     tcg_temp_free_i32(tmp);
                     s->is_jmp = DISAS_JUMP;
                 }
-- 
1.9.1

[Qemu-devel] [PULL 02/20] target-arm: Add write_type argument to cpsr_write()

[Peter Maydell]

Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
---
 linux-user/arm/nwfpe/fpa11.h |  2 +-
 linux-user/main.c            |  6 +++---
 linux-user/signal.c          |  4 ++--
 target-arm/cpu.h             | 13 +++++++++++--
 target-arm/gdbstub.c         |  2 +-
 target-arm/helper.c          |  3 ++-
 target-arm/kvm32.c           |  2 +-
 target-arm/kvm64.c           |  2 +-
 target-arm/machine.c         |  2 +-
 target-arm/op_helper.c       |  6 +++---
 10 files changed, 26 insertions(+), 16 deletions(-)

diff --git a/linux-user/arm/nwfpe/fpa11.h b/linux-user/arm/nwfpe/fpa11.h
index 7e114ee..0b07284 100644
--- a/linux-user/arm/nwfpe/fpa11.h
+++ b/linux-user/arm/nwfpe/fpa11.h
@@ -105,7 +105,7 @@ static inline void writeRegister(unsigned int x, unsigned int y)
 
 static inline void writeConditionCodes(unsigned int x)
 {
-        cpsr_write(user_registers,x,CPSR_NZCV);
+    cpsr_write(user_registers, x, CPSR_NZCV, CPSRWriteByInstr);
 }
 
 #define ARM_REG_PC 15
diff --git a/linux-user/main.c b/linux-user/main.c
index 2a692e0..072eee8 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -513,7 +513,7 @@ static void arm_kernel_cmpxchg64_helper(CPUARMState *env)
         env->regs[0] = -1;
         cpsr &= ~CPSR_C;
     }
-    cpsr_write(env, cpsr, CPSR_C);
+    cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr);
     end_exclusive();
     return;
 
@@ -562,7 +562,7 @@ do_kernel_trap(CPUARMState *env)
             env->regs[0] = -1;
             cpsr &= ~CPSR_C;
         }
-        cpsr_write(env, cpsr, CPSR_C);
+        cpsr_write(env, cpsr, CPSR_C, CPSRWriteByInstr);
         end_exclusive();
         break;
     case 0xffff0fe0: /* __kernel_get_tls */
@@ -4446,7 +4446,7 @@ int main(int argc, char **argv, char **envp)
 #elif defined(TARGET_ARM)
     {
         int i;
-        cpsr_write(env, regs->uregs[16], 0xffffffff);
+        cpsr_write(env, regs->uregs[16], 0xffffffff, CPSRWriteByInstr);
         for(i = 0; i < 16; i++) {
             env->regs[i] = regs->uregs[i];
         }
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 327c032..82f81c7 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -1611,7 +1611,7 @@ setup_return(CPUARMState *env, struct target_sigaction *ka,
 	env->regs[13] = frame_addr;
 	env->regs[14] = retcode;
 	env->regs[15] = handler & (thumb ? ~1 : ~3);
-	cpsr_write(env, cpsr, 0xffffffff);
+        cpsr_write(env, cpsr, 0xffffffff, CPSRWriteByInstr);
 }
 
 static abi_ulong *setup_sigframe_v2_vfp(abi_ulong *regspace, CPUARMState *env)
@@ -1843,7 +1843,7 @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc)
     __get_user(env->regs[15], &sc->arm_pc);
 #ifdef TARGET_CONFIG_CPU_32
     __get_user(cpsr, &sc->arm_cpsr);
-        cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC);
+    cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr);
 #endif
 
 	err |= !valid_user_regs(env);
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 3cbda73..87720d4 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -718,8 +718,17 @@ static inline void pstate_write(CPUARMState *env, uint32_t val)
 
 /* Return the current CPSR value.  */
 uint32_t cpsr_read(CPUARMState *env);
-/* Set the CPSR.  Note that some bits of mask must be all-set or all-clear.  */
-void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask);
+
+typedef enum CPSRWriteType {
+    CPSRWriteByInstr = 0,         /* from guest MSR or CPS */
+    CPSRWriteExceptionReturn = 1, /* from guest exception return insn */
+    CPSRWriteRaw = 2,             /* trust values, do not switch reg banks */
+    CPSRWriteByGDBStub = 3,       /* from the GDB stub */
+} CPSRWriteType;
+
+/* Set the CPSR.  Note that some bits of mask must be all-set or all-clear.*/
+void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
+                CPSRWriteType write_type);
 
 /* Return the current xPSR value.  */
 static inline uint32_t xpsr_read(CPUARMState *env)
diff --git a/target-arm/gdbstub.c b/target-arm/gdbstub.c
index 08b91a4..3ba9aad 100644
--- a/target-arm/gdbstub.c
+++ b/target-arm/gdbstub.c
@@ -94,7 +94,7 @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
         return 4;
     case 25:
         /* CPSR */
-        cpsr_write(env, tmp, 0xffffffff);
+        cpsr_write(env, tmp, 0xffffffff, CPSRWriteByGDBStub);
         return 4;
     }
     /* Unknown register.  */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 5a0447b..014bb80 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5233,7 +5233,8 @@ uint32_t cpsr_read(CPUARMState *env)
         | (env->GE << 16) | (env->daif & CPSR_AIF);
 }
 
-void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
+void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
+                CPSRWriteType write_type)
 {
     uint32_t changed_daif;
 
diff --git a/target-arm/kvm32.c b/target-arm/kvm32.c
index ea01932..d44a7f9 100644
--- a/target-arm/kvm32.c
+++ b/target-arm/kvm32.c
@@ -428,7 +428,7 @@ int kvm_arch_get_registers(CPUState *cs)
     if (ret) {
         return ret;
     }
-    cpsr_write(env, cpsr, 0xffffffff);
+    cpsr_write(env, cpsr, 0xffffffff, CPSRWriteRaw);
 
     /* Make sure the current mode regs are properly set */
     mode = env->uncached_cpsr & CPSR_M;
diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c
index 0f1b4d6..08c2c81 100644
--- a/target-arm/kvm64.c
+++ b/target-arm/kvm64.c
@@ -723,7 +723,7 @@ int kvm_arch_get_registers(CPUState *cs)
         pstate_write(env, val);
     } else {
         env->uncached_cpsr = val & CPSR_M;
-        cpsr_write(env, val, 0xffffffff);
+        cpsr_write(env, val, 0xffffffff, CPSRWriteRaw);
     }
 
     /* KVM puts SP_EL0 in regs.sp and SP_EL1 in regs.sp_el1. On the
diff --git a/target-arm/machine.c b/target-arm/machine.c
index ed1925a..0fc7df0 100644
--- a/target-arm/machine.c
+++ b/target-arm/machine.c
@@ -175,7 +175,7 @@ static int get_cpsr(QEMUFile *f, void *opaque, size_t size)
 
     /* Avoid mode switch when restoring CPSR */
     env->uncached_cpsr = val & CPSR_M;
-    cpsr_write(env, val, 0xffffffff);
+    cpsr_write(env, val, 0xffffffff, CPSRWriteRaw);
     return 0;
 }
 
diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index e3ddd5a..543d33a 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -422,13 +422,13 @@ uint32_t HELPER(cpsr_read)(CPUARMState *env)
 
 void HELPER(cpsr_write)(CPUARMState *env, uint32_t val, uint32_t mask)
 {
-    cpsr_write(env, val, mask);
+    cpsr_write(env, val, mask, CPSRWriteByInstr);
 }
 
 /* Write the CPSR for a 32-bit exception return */
 void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val)
 {
-    cpsr_write(env, val, CPSR_ERET_MASK);
+    cpsr_write(env, val, CPSR_ERET_MASK, CPSRWriteExceptionReturn);
 }
 
 /* Access to user mode registers from privileged modes.  */
@@ -780,7 +780,7 @@ void HELPER(exception_return)(CPUARMState *env)
     if (!return_to_aa64) {
         env->aarch64 = 0;
         env->uncached_cpsr = spsr & CPSR_M;
-        cpsr_write(env, spsr, ~0);
+        cpsr_write(env, spsr, ~0, CPSRWriteRaw);
         if (!arm_singlestep_active(env)) {
             env->uncached_cpsr &= ~PSTATE_SS;
         }
-- 
1.9.1

[Qemu-devel] [PULL 03/20] target-arm: Raw CPSR writes should skip checks and bank switching

[Peter Maydell]

Raw CPSR writes should skip the architectural checks for whether
we're allowed to set the A or F bits and should also not do
the switching of register banks if the mode changes. Handle
this inside cpsr_write(), which allows us to drop the "manually
set the mode bits to avoid the bank switch" code from all the
callsites which are using CPSRWriteRaw.

This fixes a bug in 32-bit KVM handling where we had forgotten
the "manually set the mode bits" part and could thus potentially
trash the register state if the mode from the last exit to userspace
differed from the mode on this exit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c    | 5 +++--
 target-arm/kvm64.c     | 1 -
 target-arm/machine.c   | 2 --
 target-arm/op_helper.c | 5 ++++-
 4 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 014bb80..c491cd8 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5268,7 +5268,7 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
      * In a V8 implementation, it is permitted for privileged software to
      * change the CPSR A/F bits regardless of the SCR.AW/FW bits.
      */
-    if (!arm_feature(env, ARM_FEATURE_V8) &&
+    if (write_type != CPSRWriteRaw && !arm_feature(env, ARM_FEATURE_V8) &&
         arm_feature(env, ARM_FEATURE_EL3) &&
         !arm_feature(env, ARM_FEATURE_EL2) &&
         !arm_is_secure(env)) {
@@ -5315,7 +5315,8 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
     env->daif &= ~(CPSR_AIF & mask);
     env->daif |= val & CPSR_AIF & mask;
 
-    if ((env->uncached_cpsr ^ val) & mask & CPSR_M) {
+    if (write_type != CPSRWriteRaw &&
+        ((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
         if (bad_mode_switch(env, val & CPSR_M)) {
             /* Attempt to switch to an invalid mode: this is UNPREDICTABLE.
              * We choose to ignore the attempt and leave the CPSR M field
diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c
index 08c2c81..e8527bf 100644
--- a/target-arm/kvm64.c
+++ b/target-arm/kvm64.c
@@ -722,7 +722,6 @@ int kvm_arch_get_registers(CPUState *cs)
     if (is_a64(env)) {
         pstate_write(env, val);
     } else {
-        env->uncached_cpsr = val & CPSR_M;
         cpsr_write(env, val, 0xffffffff, CPSRWriteRaw);
     }
 
diff --git a/target-arm/machine.c b/target-arm/machine.c
index 0fc7df0..03a73d9 100644
--- a/target-arm/machine.c
+++ b/target-arm/machine.c
@@ -173,8 +173,6 @@ static int get_cpsr(QEMUFile *f, void *opaque, size_t size)
         return 0;
     }
 
-    /* Avoid mode switch when restoring CPSR */
-    env->uncached_cpsr = val & CPSR_M;
     cpsr_write(env, val, 0xffffffff, CPSRWriteRaw);
     return 0;
 }
diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index 543d33a..4881e34 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -779,7 +779,10 @@ void HELPER(exception_return)(CPUARMState *env)
 
     if (!return_to_aa64) {
         env->aarch64 = 0;
-        env->uncached_cpsr = spsr & CPSR_M;
+        /* We do a raw CPSR write because aarch64_sync_64_to_32()
+         * will sort the register banks out for us, and we've already
+         * caught all the bad-mode cases in el_from_spsr().
+         */
         cpsr_write(env, spsr, ~0, CPSRWriteRaw);
         if (!arm_singlestep_active(env)) {
             env->uncached_cpsr &= ~PSTATE_SS;
-- 
1.9.1

[Qemu-devel] [PULL 04/20] linux-user: Use restrictive mask when calling cpsr_write()

[Peter Maydell]

When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
---
 linux-user/main.c   | 3 ++-
 linux-user/signal.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/linux-user/main.c b/linux-user/main.c
index 072eee8..700724e 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -4446,7 +4446,8 @@ int main(int argc, char **argv, char **envp)
 #elif defined(TARGET_ARM)
     {
         int i;
-        cpsr_write(env, regs->uregs[16], 0xffffffff, CPSRWriteByInstr);
+        cpsr_write(env, regs->uregs[16], CPSR_USER | CPSR_EXEC,
+                   CPSRWriteByInstr);
         for(i = 0; i < 16; i++) {
             env->regs[i] = regs->uregs[i];
         }
diff --git a/linux-user/signal.c b/linux-user/signal.c
index 82f81c7..962111c 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -1611,7 +1611,7 @@ setup_return(CPUARMState *env, struct target_sigaction *ka,
 	env->regs[13] = frame_addr;
 	env->regs[14] = retcode;
 	env->regs[15] = handler & (thumb ? ~1 : ~3);
-        cpsr_write(env, cpsr, 0xffffffff, CPSRWriteByInstr);
+        cpsr_write(env, cpsr, CPSR_IT | CPSR_T, CPSRWriteByInstr);
 }
 
 static abi_ulong *setup_sigframe_v2_vfp(abi_ulong *regspace, CPUARMState *env)
-- 
1.9.1

[Qemu-devel] [PULL 05/20] target-arm: In cpsr_write() ignore mode switches from User mode

[Peter Maydell]

The only case where we can attempt a cpsr_write() mode switch from
User is from the gdbstub; all other cases are handled in the
calling code (notably translate.c). Architecturally attempts to
alter the mode bits from user mode are simply ignored (and not
treated as a bad mode switch, which in v8 sets CPSR.IL). Make
mode switches from User ignored in cpsr_write() as well, for
consistency.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-6-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index c491cd8..b2d2440 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5316,6 +5316,7 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
     env->daif |= val & CPSR_AIF & mask;
 
     if (write_type != CPSRWriteRaw &&
+        (env->uncached_cpsr & CPSR_M) != CPSR_USER &&
         ((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
         if (bad_mode_switch(env, val & CPSR_M)) {
             /* Attempt to switch to an invalid mode: this is UNPREDICTABLE.
-- 
1.9.1

[Qemu-devel] [PULL 06/20] target-arm: Add comment about not implementing NSACR.RFR

[Peter Maydell]

QEMU doesn't implement the NSACR.RFR bit, which is a permitted
IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8.
Add a comment to bad_mode_switch() to note that this is why
FIQ is always a valid mode regardless of the CPU's Secure state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-7-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index b2d2440..57cc879 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5214,6 +5214,9 @@ static int bad_mode_switch(CPUARMState *env, int mode)
     case ARM_CPU_MODE_UND:
     case ARM_CPU_MODE_IRQ:
     case ARM_CPU_MODE_FIQ:
+        /* Note that we don't implement the IMPDEF NSACR.RFR which in v7
+         * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
+         */
         return 0;
     case ARM_CPU_MODE_MON:
         return !arm_is_secure(env);
-- 
1.9.1

[Qemu-devel] [PULL 07/20] target-arm: Add Hyp mode checks to bad_mode_switch()

[Peter Maydell]

We don't actually support Hyp mode yet, but add the correct
checks for it to the bad_mode_switch() function for completeness.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-8-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 57cc879..c43d66f 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5218,6 +5218,9 @@ static int bad_mode_switch(CPUARMState *env, int mode)
          * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
          */
         return 0;
+    case ARM_CPU_MODE_HYP:
+        return !arm_feature(env, ARM_FEATURE_EL2)
+            || arm_current_el(env) < 2 || arm_is_secure(env);
     case ARM_CPU_MODE_MON:
         return !arm_is_secure(env);
     default:
-- 
1.9.1

[Qemu-devel] [PULL 08/20] target-arm: Forbid mode switch to Mon from Secure EL1

[Peter Maydell]

In v8 trying to switch mode to Mon from Secure EL1 is an
illegal mode switch. (In v7 this is impossible as all secure
modes except User are at EL3.) We can handle this case by
making a switch to Mon valid only if the current EL is 3,
which then gives the correct answer whether EL3 is AArch32
or AArch64.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-9-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index c43d66f..5926b15 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5222,7 +5222,7 @@ static int bad_mode_switch(CPUARMState *env, int mode)
         return !arm_feature(env, ARM_FEATURE_EL2)
             || arm_current_el(env) < 2 || arm_is_secure(env);
     case ARM_CPU_MODE_MON:
-        return !arm_is_secure(env);
+        return arm_current_el(env) < 3;
     default:
         return 1;
     }
-- 
1.9.1

[Qemu-devel] [PULL 09/20] target-arm: In v8, make illegal AArch32 mode changes set PSTATE.IL

[Peter Maydell]

In v8, the illegal mode changes which are UNPREDICTABLE in v7 are
given architected behaviour:
 * the mode field is unchanged
 * PSTATE.IL is set (so any subsequent instructions will UNDEF)
 * any other CPSR fields are written to as normal

This is pretty much the same behaviour we picked for our
UNPREDICTABLE handling, with the exception that for v8 we
need to set the IL bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-10-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 5926b15..ff5f895 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5325,11 +5325,20 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
         (env->uncached_cpsr & CPSR_M) != CPSR_USER &&
         ((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
         if (bad_mode_switch(env, val & CPSR_M)) {
-            /* Attempt to switch to an invalid mode: this is UNPREDICTABLE.
-             * We choose to ignore the attempt and leave the CPSR M field
-             * untouched.
+            /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
+             * v7, and has defined behaviour in v8:
+             *  + leave CPSR.M untouched
+             *  + allow changes to the other CPSR fields
+             *  + set PSTATE.IL
+             * For user changes via the GDB stub, we don't set PSTATE.IL,
+             * as this would be unnecessarily harsh for a user error.
              */
             mask &= ~CPSR_M;
+            if (write_type != CPSRWriteByGDBStub &&
+                arm_feature(env, ARM_FEATURE_V8)) {
+                mask |= CPSR_IL;
+                val |= CPSR_IL;
+            }
         } else {
             switch_mode(env, val & CPSR_M);
         }
-- 
1.9.1

[Qemu-devel] [PULL 10/20] target-arm: Make mode switches from Hyp via CPS and MRS illegal

[Peter Maydell]

Mode switches from Hyp to any other mode via the CPS and MRS
instructions are illegal mode switches (though obviously switching
via exception return is valid).  Add this check to bad_mode_switch().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-11-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index ff5f895..24ea48e 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5200,12 +5200,20 @@ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque)
     /* Helper coprocessor reset function for do-nothing-on-reset registers */
 }
 
-static int bad_mode_switch(CPUARMState *env, int mode)
+static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
 {
     /* Return true if it is not valid for us to switch to
      * this CPU mode (ie all the UNPREDICTABLE cases in
      * the ARM ARM CPSRWriteByInstr pseudocode).
      */
+
+    /* Changes to or from Hyp via MSR and CPS are illegal. */
+    if (write_type == CPSRWriteByInstr &&
+        ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_HYP ||
+         mode == ARM_CPU_MODE_HYP)) {
+        return 1;
+    }
+
     switch (mode) {
     case ARM_CPU_MODE_USR:
     case ARM_CPU_MODE_SYS:
@@ -5324,7 +5332,7 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
     if (write_type != CPSRWriteRaw &&
         (env->uncached_cpsr & CPSR_M) != CPSR_USER &&
         ((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
-        if (bad_mode_switch(env, val & CPSR_M)) {
+        if (bad_mode_switch(env, val & CPSR_M, write_type)) {
             /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
              * v7, and has defined behaviour in v8:
              *  + leave CPSR.M untouched
-- 
1.9.1

[Qemu-devel] [PULL 11/20] target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1

[Peter Maydell]

If HCR.TGE is 1 then mode changes via CPS and MSR from Monitor to
NonSecure PL1 modes are illegal mode changes. Implement this check
in bad_mode_switch().

(We don't currently implement HCR.TGE, but this is the only missing
check from the v8 ARM ARM G1.9.3 and so it's worth adding now; the
rest of the HCR.TGE checks can be added later as necessary.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-12-git-send-email-peter.maydell@linaro.org
---
 target-arm/helper.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 24ea48e..3d7fda1 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5216,6 +5216,7 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
 
     switch (mode) {
     case ARM_CPU_MODE_USR:
+        return 0;
     case ARM_CPU_MODE_SYS:
     case ARM_CPU_MODE_SVC:
     case ARM_CPU_MODE_ABT:
@@ -5225,6 +5226,15 @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
         /* Note that we don't implement the IMPDEF NSACR.RFR which in v7
          * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
          */
+        /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR
+         * and CPS are treated as illegal mode changes.
+         */
+        if (write_type == CPSRWriteByInstr &&
+            (env->cp15.hcr_el2 & HCR_TGE) &&
+            (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON &&
+            !arm_is_secure_below_el3(env)) {
+            return 1;
+        }
         return 0;
     case ARM_CPU_MODE_HYP:
         return !arm_feature(env, ARM_FEATURE_EL2)
-- 
1.9.1

[Qemu-devel] [PULL 12/20] target-arm: Fix handling of SDCR for 32-bit code

[Peter Maydell]

Fix two issues with our implementation of the SDCR:
 * it is only present from ARMv8 onwards
 * it does not contain several of the trap bits present in its 64-bit
   counterpart the MDCR_EL3

Put the register description in the right place so that it does not
get enabled for ARMv7 and earlier, and give it a write function so that
we can mask out the bits which should not be allowed to have an effect
if EL3 is 32-bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455892784-11328-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
---
 target-arm/cpu.h    |  4 ++++
 target-arm/helper.c | 23 +++++++++++++++--------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 87720d4..744f052 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -598,6 +598,7 @@ void pmccntr_sync(CPUARMState *env);
 #define MDCR_EDAD     (1U << 20)
 #define MDCR_SPME     (1U << 17)
 #define MDCR_SDD      (1U << 16)
+#define MDCR_SPD      (3U << 14)
 #define MDCR_TDRA     (1U << 11)
 #define MDCR_TDOSA    (1U << 10)
 #define MDCR_TDA      (1U << 9)
@@ -606,6 +607,9 @@ void pmccntr_sync(CPUARMState *env);
 #define MDCR_TPM      (1U << 6)
 #define MDCR_TPMCR    (1U << 5)
 
+/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */
+#define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
+
 #define CPSR_M (0x1fU)
 #define CPSR_T (1U << 5)
 #define CPSR_F (1U << 6)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 3d7fda1..e9b89e6 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3037,6 +3037,12 @@ static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri,
     return CP_ACCESS_OK;
 }
 
+static void sdcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                       uint64_t value)
+{
+    env->cp15.mdcr_el3 = value & SDCR_VALID_MASK;
+}
+
 static const ARMCPRegInfo v8_cp_reginfo[] = {
     /* Minimal set of EL0-visible registers. This will need to be expanded
      * significantly for system emulation of AArch64 CPUs.
@@ -3331,6 +3337,15 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3,
       .access = PL2_RW,
       .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) },
+    { .name = "MDCR_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1,
+      .resetvalue = 0,
+      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) },
+    { .name = "SDCR", .type = ARM_CP_ALIAS,
+      .cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1,
+      .access = PL1_RW, .accessfn = access_trap_aa32s_el1,
+      .writefn = sdcr_write,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) },
     REGINFO_SENTINEL
 };
 
@@ -3688,14 +3703,6 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
       .access = PL1_RW, .accessfn = access_trap_aa32s_el1,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
       .writefn = scr_write },
-    { .name = "MDCR_EL3", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1,
-      .resetvalue = 0,
-      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) },
-    { .name = "SDCR", .type = ARM_CP_ALIAS,
-      .cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1,
-      .access = PL1_RW, .accessfn = access_trap_aa32s_el1,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) },
     { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
       .access = PL3_RW, .resetvalue = 0,
-- 
1.9.1

[Qemu-devel] [PULL 13/20] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps

[Peter Maydell]

Implement the performance monitor register traps controlled
by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
registers already have an access function to deal with the
user-enable bit, and the TPM checks can be added there. We
also need a new access function which only implements the
TPM checks for use by the few not-EL0-accessible registers
and by PMUSERENR_EL0 (which is always EL0-readable).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455892784-11328-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
---
 target-arm/helper.c | 43 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 7 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index e9b89e6..ef3f1ce 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -439,6 +439,24 @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri,
     return CP_ACCESS_OK;
 }
 
+/* Check for traps to performance monitor registers, which are controlled
+ * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
+ */
+static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
+                                 bool isread)
+{
+    int el = arm_current_el(env);
+
+    if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
+        && !arm_is_secure_below_el3(env)) {
+        return CP_ACCESS_TRAP_EL2;
+    }
+    if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
+        return CP_ACCESS_TRAP_EL3;
+    }
+    return CP_ACCESS_OK;
+}
+
 static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
 {
     ARMCPU *cpu = arm_env_get_cpu(env);
@@ -774,11 +792,22 @@ static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
                                    bool isread)
 {
     /* Performance monitor registers user accessibility is controlled
-     * by PMUSERENR.
+     * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
+     * trapping to EL2 or EL3 for other accesses.
      */
-    if (arm_current_el(env) == 0 && !env->cp15.c9_pmuserenr) {
+    int el = arm_current_el(env);
+
+    if (el == 0 && !env->cp15.c9_pmuserenr) {
         return CP_ACCESS_TRAP;
     }
+    if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
+        && !arm_is_secure_below_el3(env)) {
+        return CP_ACCESS_TRAP_EL2;
+    }
+    if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
+        return CP_ACCESS_TRAP_EL3;
+    }
+
     return CP_ACCESS_OK;
 }
 
@@ -1101,28 +1130,28 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
       .accessfn = pmreg_access },
     { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
-      .access = PL0_R | PL1_RW,
+      .access = PL0_R | PL1_RW, .accessfn = access_tpm,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
       .resetvalue = 0,
       .writefn = pmuserenr_write, .raw_writefn = raw_write },
     { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0,
-      .access = PL0_R | PL1_RW, .type = ARM_CP_ALIAS,
+      .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
       .resetvalue = 0,
       .writefn = pmuserenr_write, .raw_writefn = raw_write },
     { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
-      .access = PL1_RW,
+      .access = PL1_RW, .accessfn = access_tpm,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
       .resetvalue = 0,
       .writefn = pmintenset_write, .raw_writefn = raw_write },
     { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
-      .access = PL1_RW, .type = ARM_CP_ALIAS,
+      .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
       .writefn = pmintenclr_write, },
     { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2,
-      .access = PL1_RW, .type = ARM_CP_ALIAS,
+      .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
       .writefn = pmintenclr_write },
     { .name = "VBAR", .state = ARM_CP_STATE_BOTH,
-- 
1.9.1

[Qemu-devel] [PULL 14/20] ARM: PL061: Checking register r/w accesses to reserved area

[Peter Maydell]

From: Wei Huang <wei@redhat.com>

pl061.c emulates two GPIO devices, ARM PL061 and TI Stellaris, which
share the same read/write functions (pl061_read and pl061_write).
However PL061 and Stellaris have different GPIO register definitions
and pl061_read()/pl061_write() doesn't check it. This patch enforces
checking on offset, preventing R/W into the reserved memory area.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1455814580-17699-1-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/gpio/pl061.c | 30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c
index 5ece8b0..29dc7fc 100644
--- a/hw/gpio/pl061.c
+++ b/hw/gpio/pl061.c
@@ -60,6 +60,7 @@ typedef struct PL061State {
     qemu_irq irq;
     qemu_irq out[8];
     const unsigned char *id;
+    uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */
 } PL061State;
 
 static const VMStateDescription vmstate_pl061 = {
@@ -152,12 +153,15 @@ static uint64_t pl061_read(void *opaque, hwaddr offset,
 {
     PL061State *s = (PL061State *)opaque;
 
-    if (offset >= 0xfd0 && offset < 0x1000) {
-        return s->id[(offset - 0xfd0) >> 2];
-    }
     if (offset < 0x400) {
         return s->data & (offset >> 2);
     }
+    if (offset >= s->rsvd_start && offset <= 0xfcc) {
+        goto err_out;
+    }
+    if (offset >= 0xfd0 && offset < 0x1000) {
+        return s->id[(offset - 0xfd0) >> 2];
+    }
     switch (offset) {
     case 0x400: /* Direction */
         return s->dir;
@@ -198,10 +202,12 @@ static uint64_t pl061_read(void *opaque, hwaddr offset,
     case 0x528: /* Analog mode select */
         return s->amsel;
     default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_read: Bad offset %x\n", (int)offset);
-        return 0;
+        break;
     }
+err_out:
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "pl061_read: Bad offset %x\n", (int)offset);
+    return 0;
 }
 
 static void pl061_write(void *opaque, hwaddr offset,
@@ -216,6 +222,9 @@ static void pl061_write(void *opaque, hwaddr offset,
         pl061_update(s);
         return;
     }
+    if (offset >= s->rsvd_start) {
+        goto err_out;
+    }
     switch (offset) {
     case 0x400: /* Direction */
         s->dir = value & 0xff;
@@ -274,10 +283,13 @@ static void pl061_write(void *opaque, hwaddr offset,
         s->amsel = value & 0xff;
         break;
     default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_write: Bad offset %x\n", (int)offset);
+        goto err_out;
     }
     pl061_update(s);
+    return;
+err_out:
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "pl061_write: Bad offset %x\n", (int)offset);
 }
 
 static void pl061_reset(DeviceState *dev)
@@ -347,6 +359,7 @@ static void pl061_luminary_init(Object *obj)
     PL061State *s = PL061(obj);
 
     s->id = pl061_id_luminary;
+    s->rsvd_start = 0x52c;
 }
 
 static void pl061_init(Object *obj)
@@ -354,6 +367,7 @@ static void pl061_init(Object *obj)
     PL061State *s = PL061(obj);
 
     s->id = pl061_id;
+    s->rsvd_start = 0x424;
 }
 
 static void pl061_class_init(ObjectClass *klass, void *data)
-- 
1.9.1

[Qemu-devel] [PULL 15/20] raspi: fix SD card with recent sdhci changes

[Peter Maydell]

From: Andrew Baumann <Andrew.Baumann@microsoft.com>

Recent changes to sdhci broke SD on raspi. This change mirrors
the logic to create the SD card device at the board level.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456351128-5560-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/bcm2835_peripherals.c |  7 +++++++
 hw/arm/bcm2836.c             |  7 +++++++
 hw/arm/raspi.c               | 16 ++++++++++++++++
 3 files changed, 30 insertions(+)

diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 72467fd..6d66fa0 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -182,6 +182,13 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
         qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
                                INTERRUPT_ARASANSDIO));
+    object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->sdhci), "sd-bus",
+                              &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
 }
 
 static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data)
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 15c7622..0321439 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -73,6 +73,13 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
         return;
     }
 
+    object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals),
+                              "sd-bus", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
     sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
                             BCM2836_PERI_BASE, 1);
 
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 48d014c..6582279 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -113,6 +113,10 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
 static void raspi2_init(MachineState *machine)
 {
     RasPiState *s = g_new0(RasPiState, 1);
+    DriveInfo *di;
+    BlockBackend *blk;
+    BusState *bus;
+    DeviceState *carddev;
 
     object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2836);
     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
@@ -133,6 +137,18 @@ static void raspi2_init(MachineState *machine)
                             &error_abort);
     object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_abort);
 
+    /* Create and plug in the SD cards */
+    di = drive_get_next(IF_SD);
+    blk = di ? blk_by_legacy_dinfo(di) : NULL;
+    bus = qdev_get_child_bus(DEVICE(&s->soc), "sd-bus");
+    if (bus == NULL) {
+        error_report("No SD bus found in SOC object");
+        exit(1);
+    }
+    carddev = qdev_create(bus, TYPE_SD_CARD);
+    qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+    object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
+
     setup_boot(machine, 2, machine->ram_size);
 }
 
-- 
1.9.1

[Qemu-devel] [PULL 16/20] MAINTAINERS: Add some missing ARM related header files

[Peter Maydell]

From: Thomas Huth <thuth@redhat.com>

Some header files in the include/hw/arm/ directory can be assigned
to entries in the MAINTAINERS file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1456399324-24259-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 MAINTAINERS | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 606d9c0..ec8a037 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -363,6 +363,7 @@ M: Dmitry Solodkiy <d.solodkiy@samsung.com>
 L: qemu-arm@nongnu.org
 S: Maintained
 F: hw/*/exynos*
+F: include/hw/arm/exynos4210.h
 
 Calxeda Highbank
 M: Rob Herring <robh@kernel.org>
@@ -390,6 +391,7 @@ L: qemu-arm@nongnu.org
 S: Odd fixes
 F: hw/*/imx*
 F: hw/arm/kzm.c
+F: include/hw/arm/fsl-imx31.h
 
 Integrator CP
 M: Peter Maydell <peter.maydell@linaro.org>
@@ -432,6 +434,7 @@ F: hw/arm/spitz.c
 F: hw/arm/tosa.c
 F: hw/arm/z2.c
 F: hw/*/pxa2xx*
+F: include/hw/arm/pxa.h
 
 Stellaris
 M: Peter Maydell <peter.maydell@linaro.org>
@@ -768,6 +771,7 @@ OMAP
 M: Peter Maydell <peter.maydell@linaro.org>
 S: Maintained
 F: hw/*/omap*
+F: include/hw/arm/omap.h
 
 IPack
 M: Alberto Garcia <berto@igalia.com>
-- 
1.9.1

[Qemu-devel] [PULL 17/20] sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"

[Peter Maydell]

From: Andrew Baumann <Andrew.Baumann@microsoft.com>

This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d.

This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c         | 9 +++------
 include/hw/sd/sdhci.h | 1 -
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 73e7c87..f175b30 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -198,11 +198,9 @@ static void sdhci_reset(SDHCIState *s)
      * initialization */
     memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
 
-    if (!s->noeject_quirk) {
-        /* Reset other state based on current card insertion/readonly status */
-        sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
-        sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
-    }
+    /* Reset other state based on current card insertion/readonly status */
+    sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
+    sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
 
     s->data_count = 0;
     s->stopped_state = sdhc_not_stopped;
@@ -1275,7 +1273,6 @@ static Property sdhci_sysbus_properties[] = {
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
-    DEFINE_PROP_BOOL("noeject-quirk", SDHCIState, noeject_quirk, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 607a83e..4816516 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -76,7 +76,6 @@ typedef struct SDHCIState {
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
     uint8_t  stopped_state;/* Current SDHC state */
-    bool     noeject_quirk;/* Quirk to disable card insert/remove interrupts */
     /* Buffer Data Port Register - virtual access point to R and W buffers */
     /* Software Reset Register - always reads as 0 */
     /* Force Event Auto CMD12 Error Interrupt Reg - write only */
-- 
1.9.1

[Qemu-devel] [PULL 18/20] sdhci: add quirk property for card insert interrupt status on Raspberry Pi

[Peter Maydell]

From: Andrew Baumann <Andrew.Baumann@microsoft.com>

This quirk is a workaround for the following hardware behaviour, on
which UEFI (specifically, the bootloader for Windows on Pi2) depends:

1. at boot with an SD card present, the interrupt status/enable
   registers are initially zero
2. upon enabling it in the interrupt enable register, the card insert
   bit in the interrupt status register is immediately set
3. after a subsequent controller reset, the card insert interrupt does
   not fire, even if enabled in the interrupt enable register

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c         | 38 +++++++++++++++++++++++++++++++++++++-
 include/hw/sd/sdhci.h |  2 ++
 2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index f175b30..e087c17 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -204,6 +204,7 @@ static void sdhci_reset(SDHCIState *s)
 
     s->data_count = 0;
     s->stopped_state = sdhc_not_stopped;
+    s->pending_insert_state = false;
 }
 
 static void sdhci_data_transfer(void *opaque);
@@ -1095,6 +1096,13 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
         } else {
             s->norintsts &= ~SDHC_NIS_ERR;
         }
+        /* Quirk for Raspberry Pi: pending card insert interrupt
+         * appears when first enabled after power on */
+        if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) {
+            assert(s->pending_insert_quirk);
+            s->norintsts |= SDHC_NIS_INSERT;
+            s->pending_insert_state = false;
+        }
         sdhci_update_irq(s);
         break;
     case SDHC_NORINTSIGEN:
@@ -1181,6 +1189,24 @@ static void sdhci_uninitfn(SDHCIState *s)
     s->fifo_buffer = NULL;
 }
 
+static bool sdhci_pending_insert_vmstate_needed(void *opaque)
+{
+    SDHCIState *s = opaque;
+
+    return s->pending_insert_state;
+}
+
+static const VMStateDescription sdhci_pending_insert_vmstate = {
+    .name = "sdhci/pending-insert",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = sdhci_pending_insert_vmstate_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_BOOL(pending_insert_state, SDHCIState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
 const VMStateDescription sdhci_vmstate = {
     .name = "sdhci",
     .version_id = 1,
@@ -1215,7 +1241,11 @@ const VMStateDescription sdhci_vmstate = {
         VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
         VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
         VMSTATE_END_OF_LIST()
-    }
+    },
+    .subsections = (const VMStateDescription*[]) {
+        &sdhci_pending_insert_vmstate,
+        NULL
+    },
 };
 
 /* Capabilities registers provide information on supported features of this
@@ -1273,6 +1303,8 @@ static Property sdhci_sysbus_properties[] = {
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
+                     false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1300,6 +1332,10 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
     memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
             SDHC_REGISTERS_MAP_SIZE);
     sysbus_init_mmio(sbd, &s->iomem);
+
+    if (s->pending_insert_quirk) {
+        s->pending_insert_state = true;
+    }
 }
 
 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 4816516..0f0c3f1 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -76,6 +76,8 @@ typedef struct SDHCIState {
     uint32_t buf_maxsz;
     uint16_t data_count;   /* current element in FIFO buffer */
     uint8_t  stopped_state;/* Current SDHC state */
+    bool     pending_insert_quirk;/* Quirk for Raspberry Pi card insert int */
+    bool     pending_insert_state;
     /* Buffer Data Port Register - virtual access point to R and W buffers */
     /* Software Reset Register - always reads as 0 */
     /* Force Event Auto CMD12 Error Interrupt Reg - write only */
-- 
1.9.1

[Qemu-devel] [PULL 19/20] target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW

[Peter Maydell]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not
having any underlying state. This fixes an issue with booting
KVM enabled kernels when EL2 is on.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1456490739-19343-1-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index ef3f1ce..2b43cdc 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3672,7 +3672,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .writefn = gt_hyp_cval_write, .raw_writefn = raw_write },
     { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
-      .type = ARM_CP_IO, .access = PL2_RW,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW,
       .resetfn = gt_hyp_timer_reset,
       .readfn = gt_hyp_tval_read, .writefn = gt_hyp_tval_write },
     { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH,
-- 
1.9.1

[Qemu-devel] [PULL 20/20] target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF

[Peter Maydell]

The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.

In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.

Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.

Cc: qemu-stable@nongnu.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
---
 target-arm/cpu-qom.h |   1 +
 target-arm/helper.c  | 128 ++++++++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 122 insertions(+), 7 deletions(-)

diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index 1cc4502..1061c08 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -155,6 +155,7 @@ typedef struct ARMCPU {
     uint32_t id_mmfr1;
     uint32_t id_mmfr2;
     uint32_t id_mmfr3;
+    uint32_t id_mmfr4;
     uint32_t id_isar0;
     uint32_t id_isar1;
     uint32_t id_isar2;
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 2b43cdc..18c8296 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -4316,12 +4316,14 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 5,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_isar5 },
-            /* 6..7 are as yet unallocated and must RAZ */
-            { .name = "ID_ISAR6", .cp = 15, .crn = 0, .crm = 2,
-              .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST,
-              .resetvalue = 0 },
-            { .name = "ID_ISAR7", .cp = 15, .crn = 0, .crm = 2,
-              .opc1 = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST,
+            { .name = "ID_MMFR4", .state = ARM_CP_STATE_BOTH,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = cpu->id_mmfr4 },
+            /* 7 is as yet unallocated and must RAZ */
+            { .name = "ID_ISAR7_RESERVED", .state = ARM_CP_STATE_BOTH,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = 0 },
             REGINFO_SENTINEL
         };
@@ -4375,7 +4377,11 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
     if (arm_feature(env, ARM_FEATURE_V8)) {
-        /* AArch64 ID registers, which all have impdef reset values */
+        /* AArch64 ID registers, which all have impdef reset values.
+         * Note that within the ID register ranges the unused slots
+         * must all RAZ, not UNDEF; future architecture versions may
+         * define new registers here.
+         */
         ARMCPRegInfo v8_idregs[] = {
             { .name = "ID_AA64PFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 0,
@@ -4385,6 +4391,30 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_aa64pfr1},
+            { .name = "ID_AA64PFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 2,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64PFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 3,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64PFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 4,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64PFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 5,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64PFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64PFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
@@ -4398,6 +4428,14 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_aa64dfr1 },
+            { .name = "ID_AA64DFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 2,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64DFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 3,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "ID_AA64AFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 4,
               .access = PL1_R, .type = ARM_CP_CONST,
@@ -4406,6 +4444,14 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 5,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_aa64afr1 },
+            { .name = "ID_AA64AFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64AFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "ID_AA64ISAR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
@@ -4414,6 +4460,30 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_aa64isar1 },
+            { .name = "ID_AA64ISAR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64ISAR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 3,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64ISAR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 4,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64ISAR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 5,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64ISAR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64ISAR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "ID_AA64MMFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
@@ -4422,6 +4492,30 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 1,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->id_aa64mmfr1 },
+            { .name = "ID_AA64MMFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 2,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64MMFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 3,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64MMFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 4,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64MMFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 5,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64MMFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "ID_AA64MMFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "MVFR0_EL1", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0,
               .access = PL1_R, .type = ARM_CP_CONST,
@@ -4434,6 +4528,26 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2,
               .access = PL1_R, .type = ARM_CP_CONST,
               .resetvalue = cpu->mvfr2 },
+            { .name = "MVFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 3,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "MVFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 6,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
+            { .name = "MVFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
+              .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 7,
+              .access = PL1_R, .type = ARM_CP_CONST,
+              .resetvalue = 0 },
             { .name = "PMCEID0", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
-- 
1.9.1

Re: [Qemu-devel] [PULL 00/20] target-arm queue

[Peter Maydell]

On 26 February 2016 at 15:20, Peter Maydell <peter.maydell@linaro.org> wrote:
> The following changes since commit 4d1e324b2241017c92d816ec3af51a14685dbf62:
>
>   Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160226' into staging (2016-02-26 12:54:22 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160226
>
> for you to fetch changes up to e20d84c1407d43d5a2e2ac95dbb46db3b0af8f9f:
>
>   target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF (2016-02-26 15:09:42 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * Clean up handling of bad mode switches writing to CPSR, and implement
>    the ARMv8 requirement that they set PSTATE.IL
>  * Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor
>    register accesses
>  * Don't implement stellaris-pl061-only registers on generic-pl061
>  * Fix SD card handling for raspi
>  * Add missing include files to MAINTAINERS
>  * Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
>  * Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF

Applied, thanks.

-- PMM