From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 01/30] target-arm: Correct handling of writes to CPSR mode bits from gdb in usermode
Date: Fri, 4 Mar 2016 11:41:24 +0000 [thread overview]
Message-ID: <1457091713-10138-2-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1457091713-10138-1-git-send-email-peter.maydell@linaro.org>
In helper.c the expression
(env->uncached_cpsr & CPSR_M) != CPSR_USER
is always true; the right hand side was supposed to be ARM_CPU_MODE_USR
(an error in commit cb01d391).
Since the incorrect expression was always true, this just meant that
commit cb01d391 had no effect.
However simply changing the RHS here would reveal a logic error: if
the mode is USR we wish to completely ignore the attempt to set the
mode bits, which means that we must clear the CPSR_M bits from mask
to avoid the uncached_cpsr bits being updated at the end of the
function.
Move the condition into the correct place in the code, fix its RHS
constant, and add a comment about the fact that we must be doing a
gdbstub write if we're in user mode.
Fixes: https://bugs.launchpad.net/qemu/+bug/1550503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1456764438-30015-1-git-send-email-peter.maydell@linaro.org
---
target-arm/helper.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 18c8296..935f13b 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -5490,9 +5490,16 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
env->daif |= val & CPSR_AIF & mask;
if (write_type != CPSRWriteRaw &&
- (env->uncached_cpsr & CPSR_M) != CPSR_USER &&
((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
- if (bad_mode_switch(env, val & CPSR_M, write_type)) {
+ if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) {
+ /* Note that we can only get here in USR mode if this is a
+ * gdb stub write; for this case we follow the architectural
+ * behaviour for guest writes in USR mode of ignoring an attempt
+ * to switch mode. (Those are caught by translate.c for writes
+ * triggered by guest instructions.)
+ */
+ mask &= ~CPSR_M;
+ } else if (bad_mode_switch(env, val & CPSR_M, write_type)) {
/* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
* v7, and has defined behaviour in v8:
* + leave CPSR.M untouched
--
1.9.1
next prev parent reply other threads:[~2016-03-04 11:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 11:41 [Qemu-devel] [PULL 00/30] target-arm queue Peter Maydell
2016-03-04 11:41 ` Peter Maydell [this message]
2016-03-04 11:41 ` [Qemu-devel] [PULL 02/30] virt: Lift the maximum RAM limit from 30GB to 255GB Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 03/30] sd.c: Handle NULL block backend in sd_get_inserted() Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 04/30] sdhci: Implement DeviceClass reset Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 05/30] hw/arm/virt: Provide a secure-only RAM if booting in Secure mode Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 06/30] loader: Add load_image_mr() to load ROM image to a MemoryRegion Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 07/30] hw/arm/virt: Load bios image to MemoryRegion, not physaddr Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 08/30] hw/arm/virt: Make first flash device Secure-only if booting secure Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 09/30] hw/arm/virt: Assume EL3 boot rom will handle PSCI if one is provided Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 10/30] bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 11/30] linux-user: arm: fix coding style for some linux-user signal functions Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 12/30] linux-user: arm: pass env to get_user_code_* Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 13/30] target-arm: implement SCTLR.B, drop bswap_code Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 14/30] target-arm: cpu: Move cpu_is_big_endian to header Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 15/30] arm: cpu: handle BE32 user-mode as BE Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 16/30] linux-user: arm: set CPSR.E/SCTLR.E0E correctly for BE mode Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 17/30] linux-user: arm: handle CPSR.E correctly in strex emulation Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 18/30] target-arm: implement SCTLR.EE Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 19/30] target-arm: pass DisasContext to gen_aa32_ld*/st* Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 20/30] target-arm: introduce disas flag for endianness Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 21/30] target-arm: a64: Add endianness support Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 22/30] target-arm: introduce tbflag for endianness Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 23/30] target-arm: implement setend Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 24/30] target-arm: implement BE32 mode in system emulation Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 25/30] loader: add API to load elf header Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 26/30] loader: load_elf(): Add doc comment Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 27/30] loader: Add data swap option to load-elf Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 28/30] arm: boot: Support big-endian elfs Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 29/30] hw/intc/arm_gic.c: Implement GICv2 GICC_DIR Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 30/30] target-arm: Only trap SRS from S-EL1 if specified mode is MON Peter Maydell
2016-03-04 14:05 ` [Qemu-devel] [PULL 00/30] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457091713-10138-2-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).