From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 29/30] hw/intc/arm_gic.c: Implement GICv2 GICC_DIR
Date: Fri, 4 Mar 2016 11:41:52 +0000 [thread overview]
Message-ID: <1457091713-10138-30-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1457091713-10138-1-git-send-email-peter.maydell@linaro.org>
The GICv2 introduces a new CPU interface register GICC_DIR, which
allows an OS to split the "priority drop" and "deactivate interrupt"
parts of interrupt completion. Implement this register.
(Note that the register is at offset 0x1000 in the CPU interface,
which means it is on a different 4K page from all the other registers.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1456854176-7813-1-git-send-email-peter.maydell@linaro.org
---
hw/cpu/a15mpcore.c | 2 +-
hw/intc/arm_gic.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
hw/intc/arm_gic_common.c | 2 +-
3 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c
index e9063ad..a221b8f 100644
--- a/hw/cpu/a15mpcore.c
+++ b/hw/cpu/a15mpcore.c
@@ -109,7 +109,7 @@ static void a15mp_priv_realize(DeviceState *dev, Error **errp)
/* Memory map (addresses are offsets from PERIPHBASE):
* 0x0000-0x0fff -- reserved
* 0x1000-0x1fff -- GIC Distributor
- * 0x2000-0x2fff -- GIC CPU interface
+ * 0x2000-0x3fff -- GIC CPU interface
* 0x4000-0x4fff -- GIC virtual interface control (not modelled)
* 0x5000-0x5fff -- GIC virtual interface control (not modelled)
* 0x6000-0x7fff -- GIC virtual CPU interface (not modelled)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 60ab9b8..0834c2f 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -500,6 +500,41 @@ static uint8_t gic_get_running_priority(GICState *s, int cpu, MemTxAttrs attrs)
}
}
+/* Return true if we should split priority drop and interrupt deactivation,
+ * ie whether the relevant EOIMode bit is set.
+ */
+static bool gic_eoi_split(GICState *s, int cpu, MemTxAttrs attrs)
+{
+ if (s->revision != 2) {
+ /* Before GICv2 prio-drop and deactivate are not separable */
+ return false;
+ }
+ if (s->security_extn && !attrs.secure) {
+ return s->cpu_ctlr[cpu] & GICC_CTLR_EOIMODE_NS;
+ }
+ return s->cpu_ctlr[cpu] & GICC_CTLR_EOIMODE;
+}
+
+static void gic_deactivate_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs)
+{
+ int cm = 1 << cpu;
+ int group = gic_has_groups(s) && GIC_TEST_GROUP(irq, cm);
+
+ if (!gic_eoi_split(s, cpu, attrs)) {
+ /* This is UNPREDICTABLE; we choose to ignore it */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "gic_deactivate_irq: GICC_DIR write when EOIMode clear");
+ return;
+ }
+
+ if (s->security_extn && !attrs.secure && !group) {
+ DPRINTF("Non-secure DI for Group0 interrupt %d ignored\n", irq);
+ return;
+ }
+
+ GIC_CLEAR_ACTIVE(irq, cm);
+}
+
void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs)
{
int cm = 1 << cpu;
@@ -544,7 +579,11 @@ void gic_complete_irq(GICState *s, int cpu, int irq, MemTxAttrs attrs)
*/
gic_drop_prio(s, cpu, group);
- GIC_CLEAR_ACTIVE(irq, cm);
+
+ /* In GICv2 the guest can choose to split priority-drop and deactivate */
+ if (!gic_eoi_split(s, cpu, attrs)) {
+ GIC_CLEAR_ACTIVE(irq, cm);
+ }
gic_update(s);
}
@@ -1210,6 +1249,10 @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
s->nsapr[regno][cpu] = value;
break;
}
+ case 0x1000:
+ /* GICC_DIR */
+ gic_deactivate_irq(s, cpu, value & 0x3ff, attrs);
+ break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"gic_cpu_write: Bad offset %x\n", (int)offset);
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index ac8cf42..707d00d 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -121,7 +121,7 @@ void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
* neither it can use KVM.
*/
memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
- s, "gic_cpu", s->revision == 2 ? 0x1000 : 0x100);
+ s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100);
sysbus_init_mmio(sbd, &s->cpuiomem[0]);
}
}
--
1.9.1
next prev parent reply other threads:[~2016-03-04 11:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 11:41 [Qemu-devel] [PULL 00/30] target-arm queue Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 01/30] target-arm: Correct handling of writes to CPSR mode bits from gdb in usermode Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 02/30] virt: Lift the maximum RAM limit from 30GB to 255GB Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 03/30] sd.c: Handle NULL block backend in sd_get_inserted() Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 04/30] sdhci: Implement DeviceClass reset Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 05/30] hw/arm/virt: Provide a secure-only RAM if booting in Secure mode Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 06/30] loader: Add load_image_mr() to load ROM image to a MemoryRegion Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 07/30] hw/arm/virt: Load bios image to MemoryRegion, not physaddr Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 08/30] hw/arm/virt: Make first flash device Secure-only if booting secure Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 09/30] hw/arm/virt: Assume EL3 boot rom will handle PSCI if one is provided Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 10/30] bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 11/30] linux-user: arm: fix coding style for some linux-user signal functions Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 12/30] linux-user: arm: pass env to get_user_code_* Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 13/30] target-arm: implement SCTLR.B, drop bswap_code Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 14/30] target-arm: cpu: Move cpu_is_big_endian to header Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 15/30] arm: cpu: handle BE32 user-mode as BE Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 16/30] linux-user: arm: set CPSR.E/SCTLR.E0E correctly for BE mode Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 17/30] linux-user: arm: handle CPSR.E correctly in strex emulation Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 18/30] target-arm: implement SCTLR.EE Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 19/30] target-arm: pass DisasContext to gen_aa32_ld*/st* Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 20/30] target-arm: introduce disas flag for endianness Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 21/30] target-arm: a64: Add endianness support Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 22/30] target-arm: introduce tbflag for endianness Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 23/30] target-arm: implement setend Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 24/30] target-arm: implement BE32 mode in system emulation Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 25/30] loader: add API to load elf header Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 26/30] loader: load_elf(): Add doc comment Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 27/30] loader: Add data swap option to load-elf Peter Maydell
2016-03-04 11:41 ` [Qemu-devel] [PULL 28/30] arm: boot: Support big-endian elfs Peter Maydell
2016-03-04 11:41 ` Peter Maydell [this message]
2016-03-04 11:41 ` [Qemu-devel] [PULL 30/30] target-arm: Only trap SRS from S-EL1 if specified mode is MON Peter Maydell
2016-03-04 14:05 ` [Qemu-devel] [PULL 00/30] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457091713-10138-30-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).