qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: aik@ozlabs.ru, alex.williamson@redhat.com
Cc: agraf@suse.de, gwshan@au1.ibm.com, qemu-devel@nongnu.org,
	qemu-ppc@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCHv3 3/7] spapr_pci: Eliminate class callbacks
Date: Tue,  8 Mar 2016 13:10:25 +1100	[thread overview]
Message-ID: <1457403029-21322-4-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1457403029-21322-1-git-send-email-david@gibson.dropbear.id.au>

The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState.  So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper.  For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.

On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 hw/ppc/spapr_pci.c          | 44 ++++++++++++++++++++++----------------------
 hw/ppc/spapr_pci_vfio.c     | 18 +++++++-----------
 include/hw/pci-host/spapr.h | 37 +++++++++++++++++++++++++++++++++----
 3 files changed, 62 insertions(+), 37 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index ab6dece..966bda6 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -92,6 +92,13 @@ PCIDevice *spapr_pci_find_dev(sPAPRMachineState *spapr, uint64_t buid,
     return pci_find_device(phb->bus, bus_num, devfn);
 }
 
+static bool spapr_phb_eeh_available(sPAPRPHBState *sphb)
+{
+    sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+
+    return spc->eeh_available;
+}
+
 static uint32_t rtas_pci_cfgaddr(uint32_t arg)
 {
     /* This handles the encoding of extended config space addresses */
@@ -440,7 +447,6 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
                                     target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     uint32_t addr, option;
     uint64_t buid;
     int ret;
@@ -458,12 +464,11 @@ static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_set_option) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
-    ret = spc->eeh_set_option(sphb, addr, option);
+    ret = spapr_phb_vfio_eeh_set_option(sphb, addr, option);
     rtas_st(rets, 0, ret);
     return;
 
@@ -478,7 +483,6 @@ static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
                                            target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     PCIDevice *pdev;
     uint32_t addr, option;
     uint64_t buid;
@@ -493,8 +497,7 @@ static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_set_option) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
@@ -534,7 +537,6 @@ static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
                                             target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     uint64_t buid;
     int state, ret;
 
@@ -548,12 +550,11 @@ static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_get_state) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
-    ret = spc->eeh_get_state(sphb, &state);
+    ret = spapr_phb_vfio_eeh_get_state(sphb, &state);
     rtas_st(rets, 0, ret);
     if (ret != RTAS_OUT_SUCCESS) {
         return;
@@ -578,7 +579,6 @@ static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
                                     target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     uint32_t option;
     uint64_t buid;
     int ret;
@@ -594,12 +594,11 @@ static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_reset) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
-    ret = spc->eeh_reset(sphb, option);
+    ret = spapr_phb_vfio_eeh_reset(sphb, option);
     rtas_st(rets, 0, ret);
     return;
 
@@ -614,7 +613,6 @@ static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
                                   target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     uint64_t buid;
     int ret;
 
@@ -628,12 +626,11 @@ static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_configure) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
-    ret = spc->eeh_configure(sphb);
+    ret = spapr_phb_vfio_eeh_configure(sphb);
     rtas_st(rets, 0, ret);
     return;
 
@@ -649,7 +646,6 @@ static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
                                        target_ulong rets)
 {
     sPAPRPHBState *sphb;
-    sPAPRPHBClass *spc;
     int option;
     uint64_t buid;
 
@@ -663,8 +659,7 @@ static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
         goto param_error_exit;
     }
 
-    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
-    if (!spc->eeh_set_option) {
+    if (!spapr_phb_eeh_available(sphb)) {
         goto param_error_exit;
     }
 
@@ -1513,6 +1508,10 @@ static void spapr_phb_reset(DeviceState *qdev)
 {
     /* Reset the IOMMU state */
     object_child_foreach(OBJECT(qdev), spapr_phb_children_reset, NULL);
+
+    if (spapr_phb_eeh_available(SPAPR_PCI_HOST_BRIDGE(qdev))) {
+        spapr_phb_vfio_reset(qdev);
+    }
 }
 
 static Property spapr_phb_properties[] = {
@@ -1643,6 +1642,7 @@ static void spapr_phb_class_init(ObjectClass *klass, void *data)
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
     dc->cannot_instantiate_with_device_add_yet = false;
     spc->finish_realize = spapr_phb_finish_realize;
+    spc->eeh_available = false;
     hp->plug = spapr_phb_hot_plug_child;
     hp->unplug = spapr_phb_hot_unplug_child;
 }
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index b1e8e8e..10fa88a 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -78,7 +78,7 @@ static void spapr_phb_vfio_eeh_reenable(sPAPRPHBState *sphb)
     vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_ENABLE);
 }
 
-static void spapr_phb_vfio_reset(DeviceState *qdev)
+void spapr_phb_vfio_reset(DeviceState *qdev)
 {
     /*
      * The PE might be in frozen state. To reenable the EEH
@@ -89,8 +89,8 @@ static void spapr_phb_vfio_reset(DeviceState *qdev)
     spapr_phb_vfio_eeh_reenable(SPAPR_PCI_HOST_BRIDGE(qdev));
 }
 
-static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
-                                         unsigned int addr, int option)
+int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
+                                  unsigned int addr, int option)
 {
     uint32_t op;
     int ret;
@@ -136,7 +136,7 @@ static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
     return RTAS_OUT_SUCCESS;
 }
 
-static int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
+int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
 {
     int ret;
 
@@ -192,7 +192,7 @@ static void spapr_phb_vfio_eeh_pre_reset(sPAPRPHBState *sphb)
        pci_for_each_bus(phb->bus, spapr_phb_vfio_eeh_clear_bus_msix, NULL);
 }
 
-static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
+int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
 {
     uint32_t op;
     int ret;
@@ -221,7 +221,7 @@ static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
     return RTAS_OUT_SUCCESS;
 }
 
-static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
+int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
 {
     int ret;
 
@@ -239,12 +239,8 @@ static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
     sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
 
     dc->props = spapr_phb_vfio_properties;
-    dc->reset = spapr_phb_vfio_reset;
     spc->finish_realize = spapr_phb_vfio_finish_realize;
-    spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
-    spc->eeh_get_state = spapr_phb_vfio_eeh_get_state;
-    spc->eeh_reset = spapr_phb_vfio_eeh_reset;
-    spc->eeh_configure = spapr_phb_vfio_eeh_configure;
+    spc->eeh_available = true;
 }
 
 static const TypeInfo spapr_phb_vfio_info = {
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 7de5e02..0b936c6 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -49,10 +49,7 @@ struct sPAPRPHBClass {
     PCIHostBridgeClass parent_class;
 
     void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
-    int (*eeh_set_option)(sPAPRPHBState *sphb, unsigned int addr, int option);
-    int (*eeh_get_state)(sPAPRPHBState *sphb, int *state);
-    int (*eeh_reset)(sPAPRPHBState *sphb, int option);
-    int (*eeh_configure)(sPAPRPHBState *sphb);
+    bool eeh_available;
 };
 
 typedef struct spapr_pci_msi {
@@ -137,4 +134,36 @@ sPAPRPHBState *spapr_pci_find_phb(sPAPRMachineState *spapr, uint64_t buid);
 PCIDevice *spapr_pci_find_dev(sPAPRMachineState *spapr, uint64_t buid,
                               uint32_t config_addr);
 
+/* VFIO EEH hooks */
+#ifdef CONFIG_LINUX
+int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
+                                  unsigned int addr, int option);
+int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state);
+int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option);
+int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb);
+void spapr_phb_vfio_reset(DeviceState *qdev);
+#else
+static inline int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
+                                                unsigned int addr, int option)
+{
+    return RTAS_OUT_HW_ERROR;
+}
+static inline int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb,
+                                               int *state)
+{
+    return RTAS_OUT_HW_ERROR;
+}
+static inline int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
+{
+    return RTAS_OUT_HW_ERROR;
+}
+static inline int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
+{
+    return RTAS_OUT_HW_ERROR;
+}
+static inline void spapr_phb_vfio_reset(DeviceState *qdev)
+{
+}
+#endif
+
 #endif /* __HW_SPAPR_PCI_H__ */
-- 
2.5.0

  parent reply	other threads:[~2016-03-08  2:22 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-08  2:10 [Qemu-devel] [PATCHv3 0/7] Allow EEH on spapr-pci-host-bridge devices David Gibson
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 1/7] vfio: Start improving VFIO/EEH interface David Gibson
2016-03-08 18:33   ` Alex Williamson
2016-03-09  0:56     ` David Gibson
2016-03-09  1:36       ` Alex Williamson
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 2/7] spapr_pci: Switch to vfio_eeh_as_op() interface David Gibson
2016-03-08  2:10 ` David Gibson [this message]
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 4/7] spapr_pci: Allow EEH on spapr-pci-host-bridge David Gibson
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 5/7] spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridge David Gibson
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 6/7] spapr_pci: Remove finish_realize hook David Gibson
2016-03-08  2:10 ` [Qemu-devel] [PATCHv3 7/7] vfio: Eliminate vfio_container_ioctl() David Gibson
2016-03-08 18:34   ` Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457403029-21322-4-git-send-email-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=agraf@suse.de \
    --cc=aik@ozlabs.ru \
    --cc=alex.williamson@redhat.com \
    --cc=gwshan@au1.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).