From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Eduardo Habkost <ehabkost@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Marcel Apfelbaum <marcel@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PULL 33/53] pc: init pcms->apic_id_limit once and use it throughout pc.c
Date: Fri, 11 Mar 2016 17:09:24 +0200 [thread overview]
Message-ID: <1457708548-14093-34-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1457708548-14093-1-git-send-email-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
---
hw/i386/pc.c | 45 +++++++++++++++++++--------------------------
1 file changed, 19 insertions(+), 26 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b954134..a469979 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -699,18 +699,6 @@ static uint32_t x86_cpu_apic_id_from_index(unsigned int cpu_index)
}
}
-/* Calculates the limit to CPU APIC ID values
- *
- * This function returns the limit for the APIC ID value, so that all
- * CPU APIC IDs are < pc_apic_id_limit().
- *
- * This is used for FW_CFG_MAX_CPUS. See comments on bochs_bios_init().
- */
-static unsigned int pc_apic_id_limit(unsigned int max_cpus)
-{
- return x86_cpu_apic_id_from_index(max_cpus - 1) + 1;
-}
-
static void pc_build_smbios(FWCfgState *fw_cfg)
{
uint8_t *smbios_tables, *smbios_anchor;
@@ -748,12 +736,11 @@ static void pc_build_smbios(FWCfgState *fw_cfg)
}
}
-static FWCfgState *bochs_bios_init(AddressSpace *as)
+static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms)
{
FWCfgState *fw_cfg;
uint64_t *numa_fw_cfg;
int i, j;
- unsigned int apic_id_limit = pc_apic_id_limit(max_cpus);
fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, as);
@@ -771,7 +758,7 @@ static FWCfgState *bochs_bios_init(AddressSpace *as)
* [1] The only kind of "CPU identifier" used between SeaBIOS and QEMU is
* the APIC ID, not the "CPU index"
*/
- fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)apic_id_limit);
+ fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)pcms->apic_id_limit);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES,
acpi_tables, acpi_tables_len);
@@ -789,11 +776,11 @@ static FWCfgState *bochs_bios_init(AddressSpace *as)
* of nodes, one word for each VCPU->node and one word for each node to
* hold the amount of memory.
*/
- numa_fw_cfg = g_new0(uint64_t, 1 + apic_id_limit + nb_numa_nodes);
+ numa_fw_cfg = g_new0(uint64_t, 1 + pcms->apic_id_limit + nb_numa_nodes);
numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
for (i = 0; i < max_cpus; i++) {
unsigned int apic_id = x86_cpu_apic_id_from_index(i);
- assert(apic_id < apic_id_limit);
+ assert(apic_id < pcms->apic_id_limit);
for (j = 0; j < nb_numa_nodes; j++) {
if (test_bit(i, numa_info[j].node_cpu)) {
numa_fw_cfg[apic_id + 1] = cpu_to_le64(j);
@@ -802,10 +789,11 @@ static FWCfgState *bochs_bios_init(AddressSpace *as)
}
}
for (i = 0; i < nb_numa_nodes; i++) {
- numa_fw_cfg[apic_id_limit + 1 + i] = cpu_to_le64(numa_info[i].node_mem);
+ numa_fw_cfg[pcms->apic_id_limit + 1 + i] =
+ cpu_to_le64(numa_info[i].node_mem);
}
fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, numa_fw_cfg,
- (1 + apic_id_limit + nb_numa_nodes) *
+ (1 + pcms->apic_id_limit + nb_numa_nodes) *
sizeof(*numa_fw_cfg));
return fw_cfg;
@@ -1119,7 +1107,6 @@ void pc_cpus_init(PCMachineState *pcms)
int i;
X86CPU *cpu = NULL;
MachineState *machine = MACHINE(pcms);
- unsigned long apic_id_limit;
/* init CPUs */
if (machine->cpu_model == NULL) {
@@ -1130,10 +1117,17 @@ void pc_cpus_init(PCMachineState *pcms)
#endif
}
- apic_id_limit = pc_apic_id_limit(max_cpus);
- if (apic_id_limit > ACPI_CPU_HOTPLUG_ID_LIMIT) {
- error_report("max_cpus is too large. APIC ID of last CPU is %lu",
- apic_id_limit - 1);
+ /* Calculates the limit to CPU APIC ID values
+ *
+ * Limit for the APIC ID value, so that all
+ * CPU APIC IDs are < pcms->apic_id_limit.
+ *
+ * This is used for FW_CFG_MAX_CPUS. See comments on bochs_bios_init().
+ */
+ pcms->apic_id_limit = x86_cpu_apic_id_from_index(max_cpus - 1) + 1;
+ if (pcms->apic_id_limit > ACPI_CPU_HOTPLUG_ID_LIMIT) {
+ error_report("max_cpus is too large. APIC ID of last CPU is %u",
+ pcms->apic_id_limit - 1);
exit(1);
}
@@ -1186,7 +1180,6 @@ void pc_guest_info_init(PCMachineState *pcms)
{
int i, j;
- pcms->apic_id_limit = pc_apic_id_limit(max_cpus);
pcms->apic_xrupt_override = kvm_allows_irq0_override();
pcms->numa_nodes = nb_numa_nodes;
pcms->node_mem = g_malloc0(pcms->numa_nodes *
@@ -1371,7 +1364,7 @@ void pc_memory_init(PCMachineState *pcms,
option_rom_mr,
1);
- fw_cfg = bochs_bios_init(&address_space_memory);
+ fw_cfg = bochs_bios_init(&address_space_memory, pcms);
rom_set_fw(fw_cfg);
--
MST
next prev parent reply other threads:[~2016-03-11 15:09 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 15:07 [Qemu-devel] [PULL 00/53] vhost, virtio, pci, pc, acpi Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 01/53] acpi: add aml_create_field() Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 02/53] acpi: add aml_concatenate() Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 03/53] acpi: allow using object as offset for OperationRegion Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 04/53] acpi: add build_append_named_dword, returning an offset in buffer Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 05/53] balloon: fix segfault and harden the stats queue Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 06/53] hw/virtio: fix double use of a virtio flag Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 07/53] hw/virtio: group virtio flags into an enum Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 08/53] virtio-balloon: add 'available' counter Michael S. Tsirkin
2016-03-11 15:07 ` [Qemu-devel] [PULL 09/53] vhost-user: verify that number of queues is less than MAX_QUEUE_NUM Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 10/53] pc-dimm: fix error handling in pc_dimm_check_memdev_is_busy() Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 11/53] i386/acpi: make floppy controller object dynamic Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 12/53] i386: expose floppy drive CMOS type Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 13/53] fdc: add function to determine drive chs limits Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 14/53] i386: populate floppy drive information in DSDT Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 15/53] i386: update expected DSDT Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 16/53] virtio-pci: call pci reset variant when guest requests reset Michael S. Tsirkin
2016-03-14 1:36 ` Laszlo Ersek
2016-03-14 1:45 ` Laszlo Ersek
2016-03-11 15:08 ` [Qemu-devel] [PULL 17/53] msi_supported -> msi_nonbroken Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 18/53] ich9lpc: fix typo Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 19/53] hw/acpi: fix Q35 support for legacy Windows OS Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 20/53] acpi-test-data: add _DIS methods Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 21/53] pci-ids: add virtio 1.0 ids to spec Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 22/53] nvdimm acpi: initialize the resource used by NVDIMM ACPI Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 23/53] nvdimm acpi: introduce patched dsm memory Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 24/53] nvdimm acpi: let qemu handle _DSM method Michael S. Tsirkin
2016-03-11 15:08 ` [Qemu-devel] [PULL 25/53] nvdimm acpi: emulate dsm method Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 26/53] vhost-user: fix use after free Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 27/53] vhost-user: remove useless is_server field Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 28/53] qemu-char: avoid potential double-free Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 29/53] qemu-char: remove all msgfds on disconnect Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 30/53] qemu-char: make tcp_chr_disconnect() reentrant-safe Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 31/53] pxb: cleanup Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 32/53] pc: acpi: remove NOP assignment Michael S. Tsirkin
2016-03-11 15:09 ` Michael S. Tsirkin [this message]
2016-03-11 15:09 ` [Qemu-devel] [PULL 34/53] machine: introduce MachineClass.possible_cpu_arch_ids() hook Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 35/53] pc: acpi: cleanup qdev_get_machine() calls Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 36/53] pc: acpi: SRAT: create only valid processor lapic entries Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 37/53] pc: acpi: create MADT.lapic entries only for valid lapics Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 38/53] pc: acpi: create Processor and Notify objects " Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 39/53] pc: acpi: drop cpu->found_cpus bitmap Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 40/53] pc: acpi: clarify why possible LAPIC entries must be present in MADT Michael S. Tsirkin
2016-03-11 15:09 ` [Qemu-devel] [PULL 41/53] MAINTAINERS: Add an entry for virtio header files Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 42/53] MAINTAINERS: machine core Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 43/53] ipmi: remove IPMI_CHECK_CMD_LEN() macro Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 44/53] ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 45/53] ipmi: remove IPMI_CHECK_RESERVATION() macro Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 46/53] ipmi: add rsp_buffer_set_error() helper Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 47/53] ipmi: add a realize function to the device class Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 48/53] ipmi: use a function to initialize the SDR table Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 49/53] ipmi: remove the need of an ending record in " Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 50/53] ipmi: add some local variables in ipmi_sdr_init Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 51/53] ipmi: use a file to load SDRs Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 52/53] ipmi: provide support for FRUs Michael S. Tsirkin
2016-03-11 15:10 ` [Qemu-devel] [PULL 53/53] fw-cfg: support writeable blobs Michael S. Tsirkin
2016-03-14 15:10 ` [Qemu-devel] [PULL 00/53] vhost, virtio, pci, pc, acpi Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457708548-14093-34-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).